Kuehn Bevel edge moldings in the Travertine Etchings color give laminate countertops a shaped decorative front using a dedicated laminate edge molding profile. This Type 1 design provides a consistent bevel detail along the counter run, supporting a clean visual transition where laminate meets the exposed edge. The 12 foot length helps span longer runs with fewer joints, which supports a smoother appearance along straight sections and simplifies layout on typical kitchen or shop counters. The 1-9/16 inch height is sized for laminate countertop edge applications, so the molding can cover the build-up edge zone in one piece. The 5/16 inch thickness gives a substantial profile at the front, allowing the bevel to present clearly against the face of the countertop. As a laminate edge molding, it is used wherever a shaped, non-square front profile is wanted on laminate work surfaces.
This Kuehn Bevel laminate edge molding measures 12 feet long, 1-9/16 inches high, and 5/16 inch thick, giving fabricators a defined section to design around when building laminate countertops. The height is set to cover the countertop edge build-up zone, which helps create a continuous decorative face from deck to bottom of the edge. The 5/16 inch thickness contributes to the visible profile depth at the front, so the bevel shape reads clearly once installed against the laminate surface. The moisture resistant MDF construction supports use on laminate countertop edges in areas where occasional moisture contacts the front, such as kitchen, bath, or shop counters, while maintaining the decorative edge role.
This Kuehn Bevel Type 1 3526 laminate edge molding in Travertine Etchings is designed for laminate countertop applications where a bevel-style front is desired. As a laminate edge molding, it creates a shaped transition between the laminated deck and the exposed front, so the counter presents a finished, non-square look. Travertine Etchings appears in the stocked color set that supports many Formica and Wilsonart laminate offerings, allowing the edge to visually coordinate with matching or complementary laminate sheets on the work surface. The decorative edge molding format helps define the front line of kitchen, bath, or workroom countertops, giving the project a consistent edge treatment from section to section when the same Type 1 profile is used across all exposed runs.
The Type 1 designation identifies this bevel style among Kuehn Bevels 14 different bevel and backsplash product types, which helps shops standardize on a known profile for repeat work. With a dedicated Type 1 3526 pattern, installers can repeat the same laminate edge molding shape on remodels, extensions, or multi-room projects without profile changes. The 12 foot length is suited to typical counter spans and long islands, reducing the number of joints where separate pieces meet along the front edge. Fewer joints mean fewer transitions to align and finish, which supports a smoother visual line along the laminate front. The moisture resistant MDF core gives the profile a stable base as an edge molding in everyday laminate countertop conditions.
The KB TYPE 1 3526-46 is a Kuehn Bevel laminate edge molding designed to create a bevel-style decorative front on laminate countertops using a defined Type 1 molding profile.
The Kuehn Bevel edge molding is 12 feet long, which lets installers cover extended countertop runs with fewer joints to cut, align, and finish along the front edge.
This laminate edge molding measures 1-9/16 inches high and 5/16 inch thick, so fabricators can plan countertop build-up and trimming around a known cross section.
The Kuehn Bevel molding is made of moisture resistant MDF, supporting its role on laminate countertop edges in everyday kitchen, bath, or shop environments.
This decorative edge molding is designed for laminate countertops, where it forms a shaped bevel front that visually finishes the edge of kitchen, bath, or work surfaces.
The Type 1 profile identifies a specific Kuehn Bevel edge shape, allowing shops to repeat the same laminate edge molding detail across multiple counters or follow-up projects.
Kuehn Bevel edge moldings in the Travertine Etchings Type 1 3526 profile combine a known laminate edge molding shape with a 12 foot moisture resistant MDF section suited to countertop fronts. When a project calls for a bevel-style laminate edge that coordinates with popular Formica and Wilsonart laminate colors, this decorative edge molding provides a defined 1-9/16 inch by 5/16 inch cross section and Type 1 profile that fabricators can repeat from job to job. Selecting this part number aligns the edge detail, color, and dimensions so countertop runs share the same visual treatment along every exposed front.
Sold In: 1 Each