Kuehn Bevel edge moldings in the Type 1 7734 Jamocha Granite Sparkle profile provide a decorative laminate edge solution that carries the countertop design cleanly to the front edge, giving laminate installations a consistent finished appearance across the run.
This Kuehn Bevel laminate edge molding is manufactured as a 12 foot length, which supports longer countertop stretches and reduces the number of joints that need alignment in a typical kitchen or commercial run.
The molding size of 1-9/16 inches by 5/16 inch establishes a defined face height and thickness, so fabricators can plan countertop build-up and edge routing around a known trim dimension during layout and fabrication.
The Jamocha Granite Sparkle color is part of Kuehn Bevels stocked Formica and Wilsonart-oriented program, which helps match popular laminate patterns so the edge visually ties into common countertop color selections in shops and on jobsites.
The product sits in the Decorative Edge Moldings category as a laminate edge molding, so it is suited to finishing exposed laminate edges where a shaped, bevel-style detail is preferred over a square cut or unfinished substrate edge.
This laminate edge molding uses the Type 1 bevel style from Kuehn Bevel, so shops familiar with Type 1 layouts can integrate this Jamocha Granite Sparkle piece into existing fabrication patterns where a bevel front edge is specified.
The 1-9/16 inch by 5/16 inch dimension lets fabricators plan substrate build and laminate overhang so the molding meets the laminate surface cleanly along the top and aligns down the face without excess trimming.
The 12 foot length supports layout strategies where full-length pieces are cut to size for individual counter runs, which can reduce cutting waste on straight runs and coordinate corner or end conditions during shop fabrication.
As part of the Laminate Edge Moldings class, this product is intended to be used with laminate countertops, so it fits naturally into standard laminate shop workflows where edges are applied after substrate and deck preparation.
This Kuehn Bevel laminate edge molding is designed for use with laminate countertops, so it fits projects where a decorative bevel edge is desired on kitchen, bath, or work-surface installations built from laminate materials.
The Jamocha Granite Sparkle color designation means it is suited to tops that are coordinated to that specific decorative look, giving shops a trim choice that visually connects with laminate selections using the same pattern family.
Because Kuehn Bevel manufactures 14 different styles of bevel and backsplash product types, this Type 1 bevel edge integrates into projects that standardize on the Type 1 profile across counters and matching backsplash elements.
The Kuehn Bevel brand focuses this product within decorative edge moldings, positioning it for fabricators and installers who need a bevel-style laminate edge that sits between the laminate deck and the exposed front face of the countertop.
The moisture resistant MDF referenced in Kuehn Bevel products defines a substrate approach oriented toward countertop environments, so this edge molding plays a role where laminate tops encounter normal kitchen and work-area moisture exposure.
The Type 1 7734 labeling identifies a specific profile and color combination, which lets shops reorder the same edge molding for repeat projects or future additions while preserving an exact match in both shape and appearance at the front edge.
The 12 foot length helps installers align joints away from critical sightlines, since longer pieces can run past sinks or work zones without adding additional edge breaks that might otherwise need extra finishing attention.
The 1-9/16 inch face height and 5/16 inch thickness give measurable dimensions that support consistent routing, trimming, and buildup decisions, reducing rework when multiple tops are fabricated to the same edge standard.
The product class of Laminate Edge Moldings clarifies that it is intended as a finishing component along the exposed countertop edge, so planners can assign it specifically to the front edge detail in drawings and shop cut lists.
Because Baer Supply regularly stocks over 85 of the best selling Formica and Wilsonart colors in Type 1 designs, this particular Jamocha Granite Sparkle molding can be part of a broader color-coordinated program across multiple jobs.
Being stocked through Wurth Baer Supply connects this KB TYPE 1 7734-42 molding to a wholesale distribution channel that serves woodworking and laminate shops, helping standardize edge selections for repeat fabrication specifications.
KB TYPE 1 7734-42 is a Kuehn Bevel laminate edge molding, so it serves as the decorative front edge detail for laminate countertops using the Jamocha Granite Sparkle look.
The Kuehn Bevel edge molding measures 12 feet long by 1-9/16 inches high by 5/16 inch thick, giving fabricators a defined size for layout, cutting, and edge alignment on laminate tops.
The Type 1 bevel profile provides a consistent beveled front edge geometry, which lets shops standardize tooling and visual appearance across multiple laminate countertop sections using this style.
The Jamocha Granite Sparkle edge molding is suited to laminate countertops planned around that decorative pattern, helping coordinate the front edge appearance with matching laminate surfaces.
Each Kuehn Bevel edge molding in this model is a 12 foot length, supporting longer countertop runs and reducing the number of visible seams along the front edge.
Kuehn Bevel products are made of moisture resistant MDF, giving the edge molding a substrate tailored to typical laminate countertop environments where incidental moisture is present.
Kuehn Bevel edge moldings in the Type 1 7734 Jamocha Granite Sparkle model give laminate shops and installers a defined bevel profile, color, and size that align with laminate countertops planned around this decorative pattern.
The 12 foot length, 1-9/16 inch height, and 5/16 inch thickness supply predictable dimensions for layout and fabrication, supporting repeatable countertop builds across projects using the same edge specification.
For laminate work that calls for a bevel-style front edge and moisture resistant MDF-based construction, this KB TYPE 1 7734-42 molding provides a straightforward choice within Wurth Baer Supplys decorative edge molding range.
Sold In: 1 Each