Kuehn Bevel edge moldings in the Type 1 271, Blackstone Etchings profile provide a decorative laminate edge solution for countertop projects where a formed bevel is preferred over square-cut laminate. The 12 foot length allows long runs to be trimmed from a single piece, which helps maintain a consistent appearance along the edge of a laminate top. The 1-9/16 inch width gives coverage for standard laminate edge builds, supporting a clean visual transition from deck surface to front edge. The 5/16 inch thickness provides a substantial edge profile that works well with laminate countertop constructions that are built around that edge height. As laminate edge moldings in the Kuehn Bevel line, these parts are intended to coordinate with laminate countertops and support a finished look on residential or commercial laminate work.
This Kuehn Bevel Type 1 271 Blackstone Etchings molding is specified at 12 feet long, which supports layout of straight runs and mitered sections within a single stick when dimensions allow. The 1-9/16 inch width sets the available face area at the front of the countertop, guiding how the substrate edge and laminate build should be planned to sit behind the molding. With a thickness of 5/16 inch, the molding matches edge designs that anticipate that projection, helping align the front profile with adjacent components. As a Type 1 profile within the Kuehn Bevel system, it fits projects that are built around this specific bevel style and dimension set.
The Kuehn Bevel Type 1 271 Blackstone Etchings profile is positioned for laminate countertop applications where a bevel front edge is required instead of a square band. As a decorative edge molding in the laminate edge moldings category, it is suited to finishing exposed laminate front edges on counters and similar surfaces that call for a formed bevel shape. The Blackstone Etchings design ties directly to the same-named laminate pattern, so it fits projects that specify that visual for the main surface or need a coordinating dark, patterned edge. The 12 foot length supports use on kitchen runs, commercial tops, and longer straight sections where minimizing seams along the front edge is part of the layout plan.
The defined 1-9/16 inch width of this Kuehn Bevel Type 1 271 molding sets a predictable front face dimension, so edge build-ups can be designed to sit correctly behind the molding without overhanging or falling short. The 5/16 inch thickness establishes how far the bevel edge projects from the substrate, which guides how adjacent components and returns are planned so that joints align cleanly. Being part of Kuehn Bevels system of 14 bevel and backsplash product styles, the Type 1 profile gives fabricators a repeatable shape and size they can build into their standard laminate countertop constructions. The moisture resistant MDF core used in Kuehn Bevel products supports edge applications in typical countertop environments where occasional contact with moisture can occur, helping the molding maintain its structure in regular service conditions.
KB TYPE 1 271-46 is a Kuehn Bevel laminate edge molding in the Type 1 271 Blackstone Etchings profile, used to provide a decorative bevel edge on laminate countertops.
The Kuehn Bevel Type 1 271 Blackstone Etchings molding is 12 feet long, 1-9/16 inches wide, and 5/16 inch thick, which defines the edge coverage and projection for countertop layouts.
This Kuehn Bevel product is made of moisture resistant MDF, which supports use on laminate countertop edges in environments where occasional moisture contact is expected.
The Blackstone Etchings Type 1 271 molding is designed for laminate countertops and similar surfaces that require a matching or coordinating bevel front edge with the Blackstone Etchings pattern.
The 12 foot length allows many countertop runs to be edged with a single piece of molding, which reduces front-edge seams that must be planned and finished.
The Type 1 271 profile defines the bevel shape and dimensions, allowing fabricators to design laminate countertop edge build-ups around a consistent, repeatable front-edge geometry.
Choosing the Kuehn Bevel edge moldings in the Type 1 271 Blackstone Etchings profile ties your laminate countertop edge to a defined 12 foot, 1-9/16 inch by 5/16 inch format built on moisture resistant MDF. That combination supports projects planned around the Blackstone Etchings visual and a consistent Type 1 bevel front edge, helping installers and fabricators execute laminate tops with a coordinated, repeatable edge treatment from Wurth Baer Supply.
Sold In: 1 Each