Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Kane weathered nickel knob combines a 1-5/8 inch diameter head with a classic round profile, giving cabinet doors and drawers a consistent, understated look across a run of work. The zinc die-cast material forms a solid knob body, so each pull feels firm when doors or drawers are opened repeatedly in a busy shop, office, or home setting. The weathered nickel finish wraps that die-cast body, providing a muted metallic appearance that supports traditional or transitional cabinet styles without drawing too much attention away from the overall layout. A projection of 1-1/2 inch sets the hand clearance from the cabinet face, which helps fingers find a positive grip even on thicker fronts. The 15/16 inch base diameter steps the knob neatly down to the mounting point, which gives doors and drawer fronts a visually balanced footprint when laid out on a grid.
The Kane series knob uses a 1-5/8 inch diameter head, so installers can mark center points knowing the visible hardware will cover typical drilling variations around a standard hole. An 8-32 x 1 inch screw size matches a common cabinet hardware thread, which aligns with standard drilling and tapping setups used in cabinet shops. The 1-1/2 inch projection keeps the knob comfortably spaced from the face, helping maintain a consistent stand-off when lining up multiple knobs across upper and lower cabinets. With a 15/16 inch base diameter, the bearing surface around the mounting point remains compact, which is useful on narrow drawer fronts where space between edge profiles is limited.
The Amerock Kane series knob with a 1-5/8 inch (41 mm) diameter suits cabinet doors and drawers that benefit from a larger, easy-to-grab pull point. On wider kitchen or bath drawers, the broader diameter helps distribute pulling force across the front, which is helpful when moving fully loaded storage. The weathered nickel finish pairs with designs that call for a softer metallic look, so the hardware supports both stained wood and painted cabinet finishes without high-gloss reflection. Because the base diameter is 15/16 inch (24 mm), the knob sits comfortably on face-frame and frameless fronts, fitting visually between rails and stiles without crowding profiles or edge details.
The BP538072WN Kane knob uses zinc die-cast construction, giving each knob a uniform shape and weight that stays consistent across multiple pieces in the same job. That consistency helps layout lines remain visually straight when rows of knobs run across tall banks of doors. The 1-1/2 inch (38 mm) projection keeps all gripping points at the same stand-off, which is important when aligning with adjacent pulls or matching across replacement work in existing cabinetry. The 1-5/8 inch width and diameter allow installers to reference a single dimension when spacing hardware, reducing layout complexity on repetitive drilling patterns. The weathered nickel finish on every knob maintains a continuous tone, tying together different cabinet zones so the finished installation looks intentionally coordinated rather than pieced together.
The Amerock Kane weathered nickel knob has a 1-5/8 inch (41 mm) diameter, giving a broad gripping surface that spreads pull force across the cabinet front during everyday use.
The Kane series knob projects 1-1/2 inch (38 mm) from the cabinet face, providing consistent finger clearance and helping hands get behind the knob on doors and drawers.
The BP538072WN Kane knob is made from zinc die-cast, which forms a solid metal body that handles repeated pulling forces on active cabinet doors and drawers.
This Amerock cabinet knob uses a weathered nickel finish, giving a subdued metallic appearance that coordinates with other weathered nickel decorative hardware on the project.
The Kane series knob has a 15/16 inch (24 mm) base diameter, creating a compact contact area that fits cleanly on narrow rails, stiles, and slim drawer fronts.
The BP538072WN knob is specified with an 8-32 x 1 inch screw size, aligning with common cabinet hardware drilling practices used in many woodworking shops.
The Amerock Kane series weathered nickel knob, with its 1-5/8 inch diameter head and 1-1/2 inch projection, offers consistent dimensions that suit repetitive cabinet layouts. The zinc die-cast construction and weathered nickel finish combine to deliver a uniform look across banks of doors and drawers. With a 15/16 inch base diameter and 8-32 x 1 inch screw specification, this BP538072WN knob matches standard cabinet hardware practices, aligning well with shop drilling patterns and installation workflows.
Sold In: 1 Each
