Amerock Bar Pulls Series Oil Rubbed Bronze 12" (305 mm) Center to Center Appliance Pull, -BP54008ORB

Amerock Bar Pulls Series Appliance Pull Details

Amerock Bar Pulls Series appliance pull gives you a 12 inch (305 mm) center to center grip designed for appliance-scale doors where a larger handle is needed for leverage and control. The pull is part of Amerock Corporation's Bar Pulls Collection, so it carries the same straight, clean lines that suit modern cabinets and built-ins where consistent styling across doors matters. Its carbon steel construction creates a solid-feeling pull point, supporting frequent daily use on heavier doors where lighter materials can feel flimsy over time. The oil rubbed bronze finish provides a dark, warm tone that works well on wood grain or painted surfaces, helping you match existing decorative hardware and moldings. At 14-5/8 inches (371 mm) overall length, the handle visually balances wider appliance fronts, making the hardware look intentional instead of undersized.

Key Bar Pull Dimensions And Material Advantages

• The 12 inch (305 mm) center to center dimension sets a wide hand spread, which helps users comfortably open appliance panels and large cabinet doors without crowding fingers near the fasteners.
• The 14-5/8 inch (371 mm) overall length extends past the mounting points, so the handle visually fills more of the door face, which can make tall or wide doors look proportionate to the pull size.
• The 3/4 inch (19 mm) width gives a substantial gripping surface, which supports a firm grasp when pulling heavier doors while still fitting typical cabinet and appliance front layouts.
• The 2 inch (51 mm) projection stands the bar away from the door surface, which creates knuckle clearance during pulls and can reduce scuffing against finished panels during regular use.
• The 5/8 inch (16 mm) base diameter defines a compact footprint at each mounting point, which helps the pull sit cleanly on the surface and leaves space for surrounding design details or edge profiles.
• The carbon steel material provides a rigid bar structure, which helps the pull feel stable under load when mounted on appliance panels or large cabinet doors.

Mounting Fit For Amerock Appliance Bar Pull

The Amerock BP54008ORB appliance pull uses a 12 inch (305 mm) center to center hole layout, which aligns with common appliance pull drilling patterns so you can plan door fronts and drilling jigs around a consistent measurement. A projection of 2 inches (51 mm) keeps the handle far enough from the face of the door to give room for fingers during operation, which is especially useful on thicker appliance panels. The 5/8 inch (16 mm) base diameter defines the contact area at the mounting points, guiding how much flat surface you want around each post on doors or panels. With a 3/4 inch (19 mm) width along the bar, the pull offers enough surface for a solid grip while staying streamlined for straightforward alignment along cabinet rails or appliance trims.

Using This 12 Inch Oil Rubbed Bronze Appliance Pull

Where This Amerock Appliance Pull Works Best

This Amerock Bar Pulls Series appliance pull belongs to the Appliance Pulls product class, so it is sized for appliance fronts and larger cabinet doors where a standard cabinet pull may feel undersized. The oil rubbed bronze finish lets it coordinate with other decorative hardware and moldings finished in similar dark tones, supporting a unified look across kitchens or built-in areas. Its 14-5/8 inch (371 mm) length allows the pull to visually anchor tall or wide panels, which can be useful on refrigerator or pantry fronts that need a strong visual line. The 12 inch (305 mm) center to center dimension gives predictable spacing for multi-door runs, so repeated handles line up consistently across adjacent fronts.

Details That Support Consistent Mounting Results

The Amerock BP54008ORB pull is made from carbon steel, giving the bar and posts a sturdy feel that helps maintain alignment once mounted on a door. The 2 inch (51 mm) projection creates a consistent stand-off from the surface, which helps doors clear surrounding trim or reveals when users grip the bar. With a 3/4 inch (19 mm) width, the pull offers a defined edge for aligning to cabinet lines or appliance trims during layout. The 5/8 inch (16 mm) base diameter at each post gives a clear reference circle for drilling locations, helping installers mark and drill accurately. This appliance pull is supplied with 10-24 x 3/4 inch screws, which correspond to a common machine screw thread used in many cabinet and appliance front installations, helping the handle tie into standard mounting practices.

Common Questions About The Amerock BP54008ORB Pull

Selecting This 12 Inch Oil Rubbed Bronze Pull

This 12 inch (305 mm) center to center Amerock Bar Pulls Series appliance pull in oil rubbed bronze offers a defined set of dimensions, a carbon steel body, and 10-24 x 3/4 inch screw mounting. Those specifics let you match hole layouts, finish, and pull scale to your appliance fronts or larger cabinet doors. For projects that call for a modern bar style with predictable measurements, this BP54008ORB pull from Wurth Baer Supply aligns design, size, and mounting details into a straightforward choice.