Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock bar pull 480mm gunmetal is a stainless steel cabinet handle from the Amerock Bar Pulls Collection designed for modern, straightforward styling on doors and drawers. The 18-7/8 in (480 mm) center-to-center drilling aligns well with long fronts, giving a clean linear look that suits contemporary runs of cabinets. The stainless steel material provides a solid feel in the hand, supporting frequent everyday use in busy spaces. The gunmetal finish brings a darker, muted tone that helps the pull visually anchor on light or medium cabinet finishes. With a 22-1/16 in (560 mm) overall length, the pull visually spans more of the front, which helps larger doors and wide drawers look proportioned. The simple bar form and smooth texture keep visual noise down, which helps different cabinet banks read as one consistent installation.
The 18-7/8 in (480 mm) center-to-center dimension defines the drilling pattern, so rows of doors and drawers can be laid out with consistent spacing from edges and between pulls. The 22-1/16 in (560 mm) overall length gives a clear end-to-end size to work with when centering the pull on wide drawer fronts. A 1-3/8 in (35 mm) projection provides finger clearance behind the bar, which helps users grab the pull from above or below without rubbing the door face. The 1/2 in (13 mm) width keeps the grip slim, supporting a streamlined look on narrow rails while still giving enough surface for a confident pull. With a 3/8 in (10 mm) base diameter, the standoffs remain compact, which keeps the bar visually floating close to the surface.
This Amerock bar pull with 18-7/8 in (480 mm) center-to-center sizing fits well on longer cabinet fronts where a short handle would look undersized. The 22-1/16 in (560 mm) overall length lets the pull span a good portion of wide kitchen drawers, helping the hardware match the scale of heavier storage. On tall pantry or closet doors, the longer bar creates a comfortable reach zone, since the handle extends further vertically when mounted. The 1-3/8 in (35 mm) projection allows fingers to hook from the side or underside, which is useful on deeper drawer banks and heavy access points. Because the pull uses a 1/2 in (13 mm) bar width, it coordinates visually with other linear hardware while staying slim enough for narrow stile applications. The stainless steel material suits cabinet, furniture, and built-in millwork installations where a sturdy metal grip is preferred. The gunmetal finish helps the pull sit between black and stainless looks, making it suitable for mixed-appliance or mixed-finish spaces.
The Amerock BP19016GM designation directly ties to the Bar Pulls Collection, so matching new pieces to existing installations stays straightforward over time. The 18-7/8 in (480 mm) center-to-center spacing means once a drilling jig is set, multiple cabinets can be processed quickly with identical hole placement. A 22-1/16 in (560 mm) overall length provides a predictable footprint, which helps plan clearances from adjacent handles, wall returns, and appliance trims. The 1-3/8 in (35 mm) projection keeps the bar close to the cabinet yet far enough out to grip without knuckles contacting the door face, supporting comfortable daily operation. The combination of 1/2 in (13 mm) width and 3/8 in (10 mm) base diameter keeps the hardware visually light, reducing clutter on walls of upper units or banks of drawers. Stainless steel construction supports a solid, weighty hand feel, while the gunmetal finish lets the pull visually blend with other dark metals and modern cabinet colors for a cohesive run.
The Amerock BP19016GM pull has 18-7/8 in (480 mm) center-to-center spacing, 22-1/16 in (560 mm) overall length, 1-3/8 in (35 mm) projection, and 1/2 in (13 mm) width for proportioned cabinet installs.
The 18-7/8 in (480 mm) center-to-center measurement sets a repeatable drilling distance, helping keep handles aligned and symmetrical on multiple wide drawers and tall doors.
This bar pull uses stainless steel with a gunmetal finish, giving a solid metal construction with a darker modern tone that coordinates with many cabinet and appliance color schemes.
This 480 mm center-to-center bar pull suits wide drawers because the 22-1/16 in (560 mm) overall length visually matches larger fronts and offers a broad gripping area.
The 1-3/8 in (35 mm) projection spaces the bar off the cabinet face, giving finger clearance for a comfortable pull while keeping the handle relatively low-profile.
The Amerock Bar Pulls Collection designation indicates a family of sleek bar-style pulls, helping maintain a consistent look across cabinets by using similar clean lines and smooth textures.
The Amerock bar pull 480mm gunmetal pairs stainless steel construction with a long 18-7/8 in (480 mm) center-to-center span, giving cabinets a modern, linear handle that works well on wide drawers and tall doors. The 22-1/16 in (560 mm) overall length and 1-3/8 in (35 mm) projection balance reach and clearance, supporting comfortable daily operation without overwhelming the face. The gunmetal finish delivers a darker contemporary tone that coordinates with many door colors and fixtures. For projects calling for a sleek bar profile and consistent sizing across multiple fronts, this Amerock BP19016GM pull offers a defined footprint and clear mounting dimensions to plan around.
Sold In: 1 Each
