Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Bar Pulls appliance pull in polished nickel gives a straightforward bar style that suits modern appliance fronts, so installers get a clean, consistent look across larger doors and panels. The 12 inch (305 mm) center to center dimension sets up a long handgrip span, which suits tall panels where users need a solid grab point. Overall length of 14-5/8 inch (371 mm) extends that visual line beyond the fastener points, so the pull reads correctly on full-height faces. Carbon steel construction provides a rigid bar, so the pull feels solid when mounted on heavier fronts. A 2 inch (51 mm) projection from the surface creates finger clearance behind the bar, which supports comfortable use on thicker appliance panels. The 3/4 inch (19 mm) width presents a substantial profile, so the pull remains noticeable and easy to grasp in daily use.
The 12 inch (305 mm) center to center spacing defines the drilling layout, so installers can mark and bore two holes that match the pull precisely. A base diameter of 5/8 inch (16 mm) at each post gives a defined footprint, which helps cover cleanly drilled mounting holes on the face. The specified 10-24 x 3/4 inch screw size sets the thread and nominal length used to secure the pull, so the pull ties firmly to prepped appliance panels. With a 2 inch (51 mm) projection and 3/4 inch (19 mm) width, the bar stands off enough to clear typical door face thickness, supporting straightforward hand access once mounted. Together, these dimensions give installers clear reference points when laying out hole locations and setting the pull level across a bank of doors or panels.
This Amerock Corporation appliance pull sits in the Decorative Hardware & Moldings category under Handles and Pulls, placing it in line with other visible front hardware. As an appliance pull in the Bar Pulls Collection, it is suited to appliance-scale fronts where a longer grip is expected. The polished nickel finish helps it visually coordinate with other polished nickel pulls and handles in the same space, supporting a continuous hardware look. With 12 inch (305 mm) center to center spacing and 14-5/8 inch (371 mm) overall length, the pull spans more of the panel face than standard cabinet pulls, which suits larger doors or integrated panels. The bar profile and 3/4 inch (19 mm) width support a hand-friendly grip, which works well wherever users repeatedly open and close heavier fronts.
The defined 12 inch (305 mm) center to center measurement lets installers repeat the same drilling pattern across multiple fronts, which supports alignment from one panel to the next. The 5/8 inch (16 mm) base diameter at each post creates a consistent bearing surface against the panel, helping each pull sit flat when tightened. Using the specified 10-24 x 3/4 inch screw size keeps fastening consistent, so installers can work with a known thread and depth as they move through a run of doors. The 2 inch (51 mm) projection and 3/4 inch (19 mm) width remain the same from pull to pull, which keeps hand clearance and grip feel identical across the entire installation. Carbon steel material maintains a uniform, rigid bar, so the tactile response feels the same wherever this Amerock Bar Pulls Series BP54008PN is installed.
The Amerock BP54008PN appliance pull has 12 inch center to center spacing, 14-5/8 inch overall length, 2 inch projection, and 3/4 inch width, giving it an appliance-scale footprint.
The 12 inch center to center layout defines two fixed drilling points, so installers can repeat the same hole spacing across multiple appliance or tall door fronts.
The BP54008PN appliance pull uses carbon steel with a polished nickel finish, giving a strong bar under a bright, smooth surface that matches polished nickel hardware.
This Amerock appliance pull is specified with 10-24 x 3/4 inch screws, so its mounting posts are threaded to accept that screw size during installation.
The appliance pull projects 2 inches from the mounting surface, providing finger clearance behind the bar for comfortable gripping on thicker panels.
The 5/8 inch base diameter defines the footprint of each post against the panel, helping the pull seat firmly and cover the drilled mounting area.
The Amerock Bar Pulls Series BP54008PN appliance pull brings a 12 inch (305 mm) center to center span, 14-5/8 inch (371 mm) overall length, and 2 inch (51 mm) projection, so it suits appliance-scale or tall fronts. Carbon steel construction paired with a polished nickel finish delivers a solid-feeling bar with a bright, coordinated surface. For projects calling for a polished nickel bar pull with defined dimensions and 10-24 x 3/4 inch screw specification, this model gives a consistent pattern you can repeat across the installation.
Sold In: 1 Each
