Amerock Bar Pulls Series Golden Champagne 12" (305 mm) Center to Center Appliance Pull, -BP54008BBZ

Amerock Bar Pulls Series Appliance Pull For Appliances

Amerock Bar Pulls Series appliance pull gives a 12 inch center-to-center grip that spans wide appliance fronts, so doors and panels can be operated with a full hand rather than fingertip pulls. The carbon steel material provides a rigid bar, which helps the pull stay straight on large, heavy panels. A Golden Champagne finish creates a uniform, modern look, supporting consistent visual lines across adjoining cabinets and appliances. The Bar Pulls Collection design uses clean, smooth surfaces, which makes the pull feel straightforward and avoids visual clutter around the installation area. A projection of 2 inches from the surface creates hand clearance, helping fingers stay off finished doors during daily use. The 3/4 inch width offers a substantial gripping surface, which supports a solid feel when opening taller appliances or large custom fronts.

Key Bar Pull Details That Support Daily Use

• The 12 inch (305 mm) center-to-center measurement sets the mounting hole spacing, which allows drilling and layout to match common appliance panel widths during fabrication.
• The overall 14-5/8 inch (371 mm) length extends beyond the mounting points, giving visual balance on wider doors and helping align the pull with other long hardware runs.
• The 2 inch (51 mm) projection from the surface keeps knuckles away from the door face, which can reduce fingerprint transfer and wear marks on finished appliance panels.
• The 3/4 inch (19 mm) width creates a broader gripping area, which supports a comfortable hold when pulling heavier doors or integrated appliance fronts.
• The 5/8 inch (16 mm) base diameter defines the footprint at each mounting point, helping installers plan clearances around panel edges, moldings, or neighboring hardware.
• The Golden Champagne finish provides a warm metallic tone, which lets designers coordinate this pull with matching decorative hardware in the same space.

Installation Dimensions For Accurate Bar Pull Layout

The 12 inch center-to-center dimension sets the exact distance between mounting holes, guiding drilling jigs and templates so the pull sits level on appliance fronts. The 14-5/8 inch overall length shows how much bar extends across the face, which helps position the pull proportionally on tall or wide panels. A 2 inch projection defines how far the pull stands off the surface, letting installers evaluate door swing and nearby clearances. The 3/4 inch width and 5/8 inch base diameter describe the bar profile at both the hand grip and the contact points, which supports precise layout near panel edges, glass inserts, or adjacent hardware. The specified screw size of 10-24 x 3/4 inch ties directly to the pull's threaded interface, so hole preparation can be matched to that thread and length specification on the job.

Using This Golden Champagne Appliance Pull In Projects

Where This Amerock Appliance Pull Performs Best

This Amerock Corporation appliance pull from the Bar Pulls Collection is designed around a 12 inch center-to-center span, which suits wide appliance fronts where a longer handle supports two-handed operation. The Golden Champagne finish works as a coordinated element with other decorative hardware, so appliance fronts can visually align with cabinet handles in the same finish family. The overall 14-5/8 inch length helps this pull sit proportionally on tall panels, where a shorter handle might look undersized. Its 2 inch projection supports use on thicker appliance doors by keeping the grip area comfortably away from the face, which can matter when users are opening heavy, integrated units. The 3/4 inch width makes the bar feel substantial across the hand, supporting repeated daily operation on doors that see frequent use in kitchens or similar spaces.

Details That Support Consistent Fit And Alignment

The 12 inch (305 mm) center-to-center measurement provides a precise drilling reference, allowing fabricators to use standard jigs for consistent alignment across multiple appliance fronts. The 5/8 inch (16 mm) base diameter at each mounting point defines the seating area on the surface, which helps with laying out the pull so bases land fully on flat sections of the panel. The carbon steel construction gives the bar pull structure, helping the handle maintain straight lines when tightened against large, heavy doors. The 2 inch (51 mm) projection also plays a role in clearance around neighboring doors and cabinetry, because the handle stands off the surface enough to avoid most surface contact when grasped. The specified 10-24 x 3/4 inch screw size relates directly to the threaded posts in the pull, guiding thread selection for secure attachment to appliance or cabinet faces.

Common Questions About This Amerock Appliance Pull

Select This Pull For Consistent Appliance Front Layouts

The Amerock Bar Pulls Series appliance pull in Golden Champagne combines a 12 inch center-to-center span, 14-5/8 inch overall length, and 2 inch projection, giving installers predictable dimensions for layout. The carbon steel construction and defined base diameters support clean, repeatable alignment across multiple appliance or cabinet fronts. For projects that call for a warm metallic finish and a substantial bar profile, this BP54008BBZ pull offers known measurements that can be integrated into shop drawings and field installations confidently.