Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Bar Pulls Series 12 inch appliance pull sets up a straightforward, modern grip for larger doors and panels. This pull is part of Amerock Corporation's Bar Pulls Collection, so its lines stay clean and consistent across matching installations. The 12 inch (305 mm) center-to-center dimension spreads hand force across wider appliance or cabinet faces, which helps doors open smoothly and feel solid in daily use. Overall length of 14-5/8 inches (371 mm) gives extra hand clearance at the ends, useful on tall or heavy fronts. The 2 inch (51 mm) projection holds the bar comfortably off the surface, which provides room for fingertips without knuckle rub against the face. A 3/4 inch (19 mm) width keeps the pull substantial without looking bulky, so it fits clean-lined kitchen, bath, or shop environments where hardware needs to look intentional.
This Amerock BP54008CSG9 appliance pull uses a 12 inch (305 mm) center-to-center mounting span, which sets drill locations for new work or guides layout when aligning with existing holes. The bar length of 14-5/8 inches (371 mm) determines visual coverage on the face, so installers can position it to balance rail and stile proportions on wide panels. A 2 inch (51 mm) projection defines how far the pull stands off the door, affecting hand clearance in front of adjacent fronts or trim. With a 3/4 inch (19 mm) width, the pull reads as a solid bar while still leaving space above and below on most appliance and tall cabinet applications. The specified screw size interface of #10-24 threads ties this pull to matching machine-thread mounting points, which supports a secure mechanical connection in typical appliance-panel and cabinet hardware build-ups.
The Amerock Bar Pulls Series sterling nickel appliance pull belongs in projects where a long, straight bar suits the overall layout of tall doors or appliance panels. Its 12 inch (305 mm) center-to-center dimension matches hardware plans that call for extended pulls at mid-height on large faces, which helps keep the user's hand at a comfortable reach point. The 14-5/8 inch (371 mm) overall length adds a little extra bar beyond the mounting holes, so the pull visually anchors wide drawers or doors without crowding panel edges. A 2 inch (51 mm) projection supports applications on thicker fronts, because it maintains usable space between the bar and the face material for fingers to wrap. The 3/4 inch (19 mm) width gives enough bar surface to feel stable in the hand, which is useful on fronts that see repeated daily access.
The Bar Pulls Collection identity means this pull carries the same straight profile and smooth texture as other Bar Pulls pieces, which supports consistent sightlines when several units are mounted in a row. The Sterling Nickel finish brings a single, defined color tone to that profile, so edge gaps and reveals around the pull stay visually quiet against matching fixtures or hinges. Carbon steel construction adds weight to the bar, which helps it resist flexing under normal pulling force and keeps it feeling firm over time. The fixed 12 inch (305 mm) center-to-center drilling dimension simplifies layout on repetitive runs, because installers can lay out hole locations from one reference edge and repeat them down a bank of doors. Projection of 2 inches (51 mm) provides a predictable stand-off, which matters when aligning pulls across doors that open past each other or near surrounding casework. Width of 3/4 inch (19 mm) sets a stable bearing surface for the hand, supporting controlled pulling and reducing twisting loads against the mounting points during use.
The Amerock BP54008CSG9 is a Bar Pulls Series appliance pull, so it is intended as a handle on appliance panels or larger cabinet doors where a long straight bar is preferred.
The Amerock BP54008CSG9 appliance pull has a 12 inch, or 305 mm, center-to-center dimension, which sets the spacing for the two mounting holes during layout or retrofit work.
The Amerock Bar Pulls Series sterling nickel pull measures 14-5/8 inches, or 371 mm, in overall length, giving extra bar length beyond the mounting points for grip and visual balance.
The Amerock BP54008CSG9 pull is made from carbon steel with a Sterling Nickel finish, which delivers a solid-feeling bar in the hand with a defined nickel-toned appearance.
The Amerock BP54008CSG9 appliance pull projects 2 inches, or 51 mm, from the mounting surface, creating finger clearance between the bar and the door or panel face.
The Amerock BP54008CSG9 uses #10-24 screw threads, so its mounting holes are sized for machine-thread fasteners commonly used in appliance-panel and cabinet hardware assemblies.
The Amerock Bar Pulls Series 12 inch appliance pull brings a carbon steel bar with Sterling Nickel finish to tall doors and appliance fronts, matching projects that call for clean, linear hardware. With a 12 inch (305 mm) center-to-center mounting span, 14-5/8 inch (371 mm) overall length, 2 inch (51 mm) projection, and 3/4 inch (19 mm) width, it sets a clear set of dimensions for layout on new or existing work. For jobs where an Amerock Corporation Bar Pulls profile and a defined sterling nickel tone are part of the plan, this BP54008CSG9 pull is a direct way to carry that look across appliance and large cabinet faces.
Sold In: 1 Each
