Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Revitalize knob in gilded bronze gives cabinets a defined pull point using a 1-1/4 in length that is sized for everyday gripping. The 7/8 in width presents a compact front profile, which helps on doors where knobs sit near adjacent walls or trim. A projection of 1-3/16 in sets the hand away from the door face, reducing knuckle contact with the cabinet surface during use. The knob is built from zinc die-cast material, so the body is formed as a solid casting for consistent shape and feel. The gilded bronze finish defines the visual look, tying together other warm-toned decorative hardware in the same space. An 11/16 in base diameter focuses the load onto a clear footprint on the door or drawer front, which supports a clean contact point against the cabinet surface.
The knob length of 1-1/4 in and width of 7/8 in give clear outer dimensions, so drilling layouts can be marked to keep knobs centered on doors and drawers. A projection of 1-3/16 in defines the standoff from the cabinet face, which factors into how far the hand reaches when opening doors. The 11/16 in base diameter identifies the contact footprint, guiding the installer when visually lining up the knob over the predrilled hole. The knob uses an 8-32 x 1 in screw size, tying the mounting thread and fastener length to the standard hardware patterns used on many cabinet fronts.
The Amerock Corporation BP55340GB knob is part of the Revitalize collection, which locates it within a coordinated decorative hardware family for cabinets. Its 1-1/4 in length and 7/8 in width allow it to sit comfortably on standard cabinet doors and drawer fronts without overwhelming narrow stiles. The 1-3/16 in projection keeps the gripping point out from the face, supporting clearance for fingers on framed, frameless, or overlay fronts within typical thickness ranges. With a base diameter of 11/16 in, the knob rests on a defined circular area, which fits well on flat panel sections of doors and drawers used in many woodworking layouts. The gilded bronze finish lets this knob visually align with other gilded bronze decorative hardware from the same category, helping create a consistent look across a run of cabinets.
The specific 1-1/4 in length provides a repeatable measurement for installers setting up jigs or templates, which helps keep knob locations uniform from cabinet to cabinet. A 7/8 in width keeps the knob face compact, which matters when working close to door edges, appliance panels, or backsplashes where extra overhang could interfere with adjacent surfaces. The projection of 1-3/16 in separates the hand from the cabinet face, reducing wear on finished surfaces from regular pulling and contact. The 11/16 in base diameter offers a stable seating area that can cover the drilled hole cleanly, which supports a neat finished appearance on the door or drawer front. The zinc die-cast construction supplies a continuous, molded body that maintains its shape under repeated pulls in everyday cabinet use. The defined gilded bronze finish lets project planners match this knob with other Amerock decorative hardware in the same color family for cohesive cabinet installations.
The Amerock BP55340GB knob has a length of 1-1/4 in, width of 7/8 in, projection of 1-3/16 in, and base diameter of 11/16 in, which defines its footprint and reach on cabinet fronts.
The 1-3/16 in projection sets the knob out from the cabinet face, giving fingers room behind the knob and helping reduce contact with the door or drawer surface during pulls.
The Revitalize knob is made from zinc die-cast material, providing a solid cast body that supports a consistent feel during repeated cabinet opening and closing.
This Revitalize series knob has a gilded bronze finish, which sets a warm metallic tone that can be matched with other gilded bronze decorative hardware pieces.
The BP55340GB knob uses an 8-32 x 1 in screw size, aligning with a common cabinet knob thread and length for standard door and drawer front thicknesses.
The 11/16 in base diameter defines a compact circular seating area on the cabinet surface, covering the drilled hole and giving a clean, contained contact point.
The Amerock Revitalize series BP55340GB knob from Wurth Baer Supply combines a 1-1/4 in length, 7/8 in width, and 1-3/16 in projection to deliver a clear grip area on cabinet fronts. Its zinc die-cast construction and 11/16 in base diameter give a solid, defined contact point on doors and drawers. The gilded bronze finish positions this knob within a coordinated decorative hardware look for cabinet projects that call for this color. For cabinet builds or updates needing a gilded bronze knob with these specific dimensions and an 8-32 x 1 in mounting screw size, this Revitalize knob aligns the visual style and measurements into one hardware choice.
Sold In: 1 Each
