Amerock Revitalize Series Satin Nickel 12" (305 mm) Center to Center Appliance Pull, -BP55349G10

Amerock Revitalize Appliance Pull For Appliances

Amerock Revitalize appliance pull is a 12 inch (305 mm) center-to-center appliance pull designed for appliance-scale doors and fronts, so it spans wider panels in one solid grip. The 12-7/8 inch overall length gives extra hand clearance along the face, which helps on tall or heavy appliance panels where a full hand grab is preferred. A 2-1/4 inch projection brings the pull out from the surface, creating consistent finger space for users in day-to-day operation. The 1-1/8 inch width provides a substantial feel in the hand, supporting confident operation on larger fronts. Made from zinc die-cast material, the pull offers a solid, uniform body that supports repeatable handle placement across multiple units. The satin nickel finish delivers a muted metallic look that coordinates visually with satin nickel appliance trims and decorative hardware lines.

Key Revitalize Pull Details That Support Use

• The 12 inch (305 mm) center-to-center dimension sets consistent hole spacing, which helps installers align this pull with standard appliance drilling layouts across multiple doors.
• The 12-7/8 inch overall length gives extended gripping area, which is useful when users open tall or heavy appliance fronts from different hand positions.
• The 2-1/4 inch projection creates space between the appliance panel and the pull, which helps hands clear decorative panels and adjacent surfaces during operation.
• The 1-1/8 inch width yields a substantial grip profile, which supports a firm hand hold on appliance-scale fronts without feeling cramped.
• The zinc die-cast construction provides a solid, one-piece body, which supports stable mounting when the pull is tightened against appliance-grade door materials.
• The satin nickel finish offers a consistent, low-sheen metallic surface, which helps this pull visually coordinate with satin nickel hinges and visible appliance trim.

Mounting Dimensions And Screw Size Details

This Amerock Corporation appliance pull uses a 12 inch (305 mm) center-to-center mounting layout, so installers can drill or verify two mounting points at that fixed distance for repeatable alignment along a run of units. The pull is designed with a 2-1/4 inch projection from the mounting surface, which positions the gripping bar away from the panel for comfortable hand access. A 1-1/8 inch width across the pull sets the front profile, helping installers plan clearances near adjacent doors or walls. The manufacturer specifies #10-24 machine screw threads for mounting, so the handle interfaces with threaded fasteners sized to that standard. Available screw lengths in 0.75 inch, 1 inch, 1.25 inch, 1.5 inch, and 1.75 inch sizes allow the pull to be secured through different appliance panel thicknesses using the same #10-24 thread pattern.

Using This Satin Nickel Revitalize Appliance Pull

Where This Amerock Appliance Pull Fits In

The BP55349G10 part from Amerock Corporation is part of the Revitalize collection within the Decorative Hardware & Moldings category, aligning it with handles and pulls used on cabinet and appliance fronts. As an appliance pull in the Appliance Pulls product class, it is scaled for larger doors where a standard cabinet pull may feel undersized. The satin nickel finish allows this piece to visually connect with other satin nickel hardware in the same project, supporting a coordinated look across cabinets and appliances. The 12 inch (305 mm) center-to-center layout positions this pull for appliance fronts that call for wide, two-point mounting spaced evenly across the face. With a 12-7/8 inch length, it also suits tall panels where users may grab the pull at varying heights.

Details That Support Consistent Mounting Results

The fixed 12 inch (305 mm) center-to-center measurement provides a clear drilling reference, which helps installers produce straight, repeatable handle layouts across multiple appliance fronts. The 2-1/4 inch projection defines how far the pull stands off the surface, allowing planners to coordinate this dimension with surrounding door swings and reveals. The specified #10-24 thread on the mounting screws standardizes the interface between the pull and the fasteners, so each mounting point tightens consistently across varying panel thicknesses. Multiple screw lengths - 0.75 inch, 1 inch, 1.25 inch, 1.5 inch, and 1.75 inch - support installation through thinner or thicker appliance panels using the same pull body. Zinc die-cast construction provides a uniform casting for the handle, which supports even contact at both mounting posts when tightened. The satin nickel surface finish helps reduce visual distraction from fingerprints compared to higher gloss finishes, while staying aligned with other satin nickel components.

Common Questions About Amerock Revitalize Appliance Pull

Selecting This Revitalize Pull For Appliance Fronts

The Amerock Revitalize satin nickel 12 inch center-to-center appliance pull offers a defined mounting pattern, a 12-7/8 inch overall length, and a 2-1/4 inch projection, all tailored to appliance-scale fronts. With zinc die-cast construction, #10-24 screw threading, and a satin nickel finish that aligns with the Revitalize collection, this BP55349G10 part from Wurth Baer Supply supports coordinated hardware layouts on appliances and adjacent cabinetry. Use these verified dimensions and material details to match this pull to appliance fronts that call for wide, satin nickel handles with consistent mounting spacing.