Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Revitalize 3 in pull is a zinc alloy cabinet handle from the Revitalize collection finished in gunmetal, so it delivers a consistent look that matches other Amerock decorative hardware on the same job. The 3 in (76 mm) center-to-center drilling aligns with common cabinet and drawer boring, reducing layout work on new installations or change-outs. Overall length is 3-11/16 in (94 mm), giving a bit of hand clearance past the screw centers for a comfortable grasp on doors or drawers. Projection of 1-3/8 in (35 mm) stands the pull off the front, which provides usable finger space without sticking too far into walkways. Width of 9/16 in (14 mm) keeps the pull visually streamlined, which helps it sit cleanly on narrow rails and smaller drawer fronts. Matching 9/16 in (14 mm) base length and width create a square footprint at each end that seats neatly against flat cabinet faces.
This BP55343GM cabinet pull uses a 3 in (76 mm) center-to-center dimension, so hole locations line up easily with jigs and templates set for that common spacing. The 9/16 in (14 mm) base length and 9/16 in (14 mm) base width define a compact, square bearing surface at each end, which helps the pull sit flat on standard cabinet rails without overhanging narrow framing. With a 3-11/16 in (94 mm) overall length, there is a modest margin beyond the holes at each side, leaving enough wood around the base when centered on typical 1-1/2 in or wider rails. The 1-3/8 in (35 mm) projection keeps the handle comfortably offset from the face, which supports a straight pull action and reduces knuckle contact on thicker doors.
This Amerock Revitalize series pull with 3 in (76 mm) center-to-center spacing fits cabinet doors and drawers drilled on that standard, so it suits many kitchen, bath, and built-in cabinet layouts. The compact 3-11/16 in (94 mm) length works well on smaller drawer fronts and narrow rails, keeping the ends of the pull comfortably inset from the edge of the panel. Its 9/16 in (14 mm) width and matching base footprint allow use on face frames and frameless doors without crowding adjacent fronts, which is useful on tight reveals. The gunmetal finish lets this pull function as a dark accent on light cabinetry or a subtle match on darker finishes, pairing with other gunmetal hardware elements in the room. Because it is part of the Revitalize collection, this single size can be combined visually with other Revitalize pieces on larger projects that share the same design profile.
The defined 3 in (76 mm) center-to-center measurement on the BP55343GM pull supports repeatable drilling using standard cabinet jigs, which helps keep all handles aligned across banks of doors and drawers. Its 1-3/8 in (35 mm) projection gives consistent finger clearance from front to front, so users experience the same pull feel throughout a run of cabinets. The 9/16 in (14 mm) base length and width provide a stable contact patch, which helps distribute load on the surface when the pull is used repeatedly over time. Zinc alloy material creates a rigid casting, so the handle feels solid as it is gripped and pulled during everyday operation. The 3-11/16 in (94 mm) overall length creates a predictable proportion relative to common drawer sizes, helping installers line up multiple pulls in a straight visual band. By matching the gunmetal finish across several pulls, the installation presents a unified appearance that aligns with other gunmetal cabinet components.
The Amerock BP55343GM pull has a 3 in (76 mm) center-to-center dimension, so holes are spaced 3 in apart for mounting on cabinet doors or drawers.
The Amerock Revitalize 3 in pull measures 3-11/16 in (94 mm) overall, so it extends slightly beyond the mounting holes for better grip and visual balance.
This cabinet pull is made from zinc alloy, providing a solid metal handle suitable for regular use on cabinet doors and drawers.
This Amerock decorative handle has a projection of 1-3/8 in (35 mm), creating functional finger clearance between the pull and the cabinet face.
The Revitalize collection cabinet pull has a bar width of 9/16 in (14 mm), which keeps the profile slim for use on narrow rails and drawer fronts.
The Amerock BP55343GM cabinet pull has a gunmetal finish, allowing it to coordinate with other gunmetal cabinet hardware and fixtures.
The Amerock Revitalize series 3 in (76 mm) center-to-center gunmetal pull BP55343GM offers a defined set of dimensions that align with common cabinet drilling and layout. When a project calls for a compact handle with 3-11/16 in (94 mm) length, 1-3/8 in (35 mm) projection, and a 9/16 in (14 mm) square base footprint, this zinc alloy pull provides those measurements in a coordinated Revitalize collection profile. For cabinet work where matching gunmetal hardware and consistent 3 in spacing are important, selecting this Amerock pull helps maintain a unified appearance and predictable fit across doors and drawers.
Sold In: 1 Each
