Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Revitalize appliance pull is a zinc die-cast handle designed as an appliance pull for heavier doors where a solid grip matters on built-in units. The 12 inch center-to-center drilling matches standard appliance-style layouts, so the handle positions evenly across wider doors. The overall 12-7/8 inch length spreads the gripping area, which helps users grab the pull comfortably from different angles on tall or side-swing doors. A 2-1/4 inch projection sets the handle off the face of the door, creating space for fingers and work gloves between the pull and the surface. The 1-1/8 inch width provides a substantial feel across the hand, which supports frequent use in busy kitchen environments. The oil rubbed bronze finish gives the pull a dark, traditional look that coordinates with similar decorative hardware finishes across the same space.
The 12 inch center-to-center dimension defines the hole spacing for this appliance pull, so drilling or existing bores must match that layout for proper mounting. The 12-7/8 inch overall length shows how much handle spans across the door face, which helps installers plan visual alignment relative to panels, rails, and stiles. A 2-1/4 inch projection sets the pull out from the front surface, affecting clearance near adjacent doors, walls, or trim. The 1-1/8 inch width indicates how much handle surface runs across the door, which matters when planning spacing between neighboring hardware or edge reveals. The manufacturer part number BP55349ORB identifies this exact oil rubbed bronze model within the Amerock Revitalize series for consistent specification on drawings and orders.
This Amerock Revitalize series appliance pull in oil rubbed bronze is suited to appliance-style doors or large cabinet doors where a 12 inch center-to-center pull is desired. The zinc die-cast construction supports use on doors that see frequent opening, because the rigid body provides a firm handhold when pulling against appliance gaskets or heavier panels. With a 12-7/8 inch overall length, the pull spans a good portion of the door width, which helps visually balance wider fronts commonly found on built-in units. The 2-1/4 inch projection gives users space to wrap fingers behind the pull, which can be useful on thicker doors where a shallow handle would feel cramped. The 1-1/8 inch width supports a broad contact area across the palm, which can be helpful when users open doors repeatedly throughout the day.
The defined 12 inch center-to-center drilling provides a precise mounting reference, which supports clean alignment when multiple BP55349ORB pulls are set across a bank of cabinet or appliance fronts. When layouts are repeated, that consistent spacing helps installers create straight visual lines from handle to handle. The 12-7/8 inch length offers a clear planning dimension when locating the pull relative to panel edges, allowing layouts that maintain even margins at top, bottom, or sides. The 2-1/4 inch projection is important in tight kitchens because it establishes how far the handle extends into the room, which can affect clearances between passing doors or near adjacent cabinetry. The oil rubbed bronze finish aligns with traditional and transitional hardware schemes, which helps designers maintain a unified appearance when coordinating this Amerock Revitalize pull with other handles and knobs sharing the same finish family.
The Amerock Revitalize appliance pull uses a 12 inch center-to-center mounting dimension, which guides drilling layout so both posts align correctly on the door surface.
The pull has an overall length of 12-7/8 inch, so it spans a substantial portion of appliance or large cabinet doors for visual balance and a wide gripping area.
The BP55349ORB appliance pull projects 2-1/4 inch from the door face, giving finger clearance behind the handle and affecting how far it extends into the room.
The pull is made from zinc die-cast, providing a rigid handle body that supports a solid feel when mounted to appliance or cabinet doors.
The pull width is 1-1/8 inch, offering a broad gripping surface that feels substantial in the hand on larger doors.
The oil rubbed bronze finish gives the pull a dark, traditional appearance that coordinates with other oil rubbed bronze decorative hardware in the same space.
The Amerock Revitalize appliance pull BP55349ORB combines a 12 inch center-to-center mounting dimension with a 12-7/8 inch overall length, giving installers clear layout points on appliance or large cabinet doors. With 2-1/4 inch projection and 1-1/8 inch width, the pull creates a comfortable handhold that stands off the door face for everyday use. The zinc die-cast material and oil rubbed bronze finish align this handle with traditional kitchen hardware schemes while maintaining defined dimensions for repeatable installation across multiple fronts. For projects that call for an appliance pull with these specific measurements and finish, this model offers a clearly documented option to specify and order.
Sold In: 1 Each
