Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Revitalize gunmetal pull is a 3-3/4 in (95 mm) center to center cabinet handle designed for drawers and doors that need a defined 96 mm drilling pattern, so existing or planned holes align accurately during installation and replacement work. The pull is part of the Amerock Revitalize Series, which gives installers a consistent style reference when matching new hardware across a project. Its gunmetal finish provides a dark, modern look that supports design choices where a contrasted metal tone is required on casework. The pull is made from a zinc alloy, so it provides a solid metal feel in hand while mounting to standard cabinet fronts. The overall length is 4-5/16 in, which means the pull visually spans more of the drawer or door face than only the fastener spacing, helping balance proportions on typical kitchen and bath fronts.
The 3-3/4 in (95 mm) center to center measurement on this Amerock pull sets the exact distance between mounting holes, so layout work on new fronts or retrofits can follow a known drilling pattern. The 4-5/16 in overall length means the handle covers the span around those holes, which helps when aligning multiple pulls across a bank of doors and drawers. With a 1-7/16 in projection, the pull stands out from the surface at a consistent depth, supporting straight visual lines along cabinet runs. The 5/8 in width defines how much rail or stile face the pull occupies, which matters when placing it on narrow frames or smaller drawer fronts.
This Amerock Revitalize Series BP55344GM pull is specified as a 3-3/4 in (95 mm) center to center unit, so it suits cabinet doors and drawers drilled on the common 96 mm pattern. On framed or frameless cabinets, that spacing lets installers repeat the same layout across banks of fronts for a uniform hardware grid. The 4-5/16 in overall length gives each door or drawer a handle that visually matches standard cabinet proportions, which is useful when lining up hardware through a full kitchen or office run. With a 1-7/16 in projection, the pull stands out enough to offer hand clearance behind the bar, helping users get a complete grip even when adjacent cabinets are close together. The 5/8 in width keeps the profile slim, so it works on narrower rails or smaller bath vanity fronts where wider pulls might crowd panel details.
The defined 3-3/4 in (95 mm) center to center value on this zinc alloy Amerock pull supports repeatable drilling and straightforward replacement on existing 96 mm patterns, which helps reduce layout time when multiple cabinets are involved. Zinc alloy construction creates a single, solid pull body that maintains its form once mounted to the door or drawer face, supporting a steady feel when users operate heavy fronts. The gunmetal finish coordinates with other gunmetal decorative hardware, helping designers and installers keep a continuous metal tone across hinges, knobs, and pulls from the same space. The 4-5/16 in overall length, paired with 5/8 in width, defines a predictable footprint that works with most common cabinet rail and stile sizes, so pulls line up cleanly without overwhelming narrower profiles. The 1-7/16 in projection fixes a consistent stand-off distance, supporting straight sight lines and repeatable ergonomics across every installed pull on the project.
The Amerock BP55344GM pull has a 3-3/4 in (95 mm) center to center dimension, so drilling and replacement work can follow the 96 mm pattern used on many cabinet installations.
The Amerock Revitalize BP55344GM pull is made from zinc alloy, giving the handle a solid metal construction that supports a firm grip on cabinet doors and drawers.
The pull has an overall length of 4-5/16 in, so its ends extend past the mounting holes to cover the drilled area and keep proportions balanced on standard cabinet fronts.
The pull projects 1-7/16 in from the cabinet surface, creating space behind the handle for fingers while maintaining a consistent stand-off along a row of fronts.
The BP55344GM pull has a gunmetal finish, giving cabinets a dark metal tone that coordinates with other gunmetal decorative hardware in the same room.
The pull width is 5/8 in, defining a slim grip band that fits well on narrow rails and smaller drawer fronts without crowding surrounding panel details.
The Amerock Revitalize gunmetal pull with 3-3/4 in (95 mm) center to center spacing gives installers a defined 96 mm drilling pattern, which suits both new layouts and upgrades that match existing holes. Zinc alloy construction and a 4-5/16 in overall length provide a solid, proportioned handle for doors and drawers. The 1-7/16 in projection and 5/8 in width set predictable ergonomics and footprint across cabinet runs. For projects calling for a gunmetal finish with these exact dimensions, this BP55344GM pull from Wurth Baer Supply aligns cleanly with those requirements.
Sold In: 1 Each
