Amerock Revitalize Series Black Bronze 18" (457 mm) Center to Center Appliance Pull, -BP55350BBR

Amerock Revitalize Appliance Pull For Large Fronts

Amerock Revitalize appliance pull gives an 18 inch center-to-center grip that spans wide appliance or cabinet fronts, so doors and panels get a pull sized to the scale of the face. The zinc construction creates a solid metal handle that feels substantial when operating heavier appliance-style fronts. The black bronze finish delivers a dark, classic look that ties into other black or bronze decorative hardware on the job. Overall length of 18-7/8 inches sets the pull slightly past each side of an 18 inch bore pattern, which visually frames the mounting holes for a balanced layout. A projection of 2-1/4 inches stands the pull off the surface, providing finger clearance while keeping the handle close enough to the face for a tight, built-in appearance on tall doors and appliance panels.

Key Amerock Revitalize Pull Details That Matter

• The 18 inch (457 mm) center-to-center spacing sets hole locations for drilling, which simplifies layout when aligning multiple pulls across doors or matching existing 18 inch bores.
• The 18-7/8 inch (479 mm) overall length keeps a consistent reveal beyond the holes, which helps create even sight lines when repeating this pull along a run of tall cabinets.
• The 2-1/4 inch (57 mm) projection defines how far the pull stands off the face, which affects hand clearance and how far doors can swing without the handle contacting nearby surfaces.
• The 1-3/16 inch (30 mm) grip width offers a comfortable grasp area, which supports confident pulls on heavier doors where a narrow profile could feel cramped.
• The 1-1/8 inch (29 mm) by 1-3/16 inch (30 mm) base sizes spread contact at each mounting point, which helps seat the pull firmly against the surface for a stable install.
• The zinc material provides a metal body under the black bronze finish, which supports a unified look with other zinc-based Amerock decorative hardware on the same project.

Installation Dimensions For Accurate Appliance Pull Fit

The 18 inch (457 mm) center-to-center dimension defines the bore pattern for this Amerock Revitalize appliance pull, so installers can lay out two fixing points with confidence on appliance panels or tall cabinet doors. A projection of 2-1/4 inches (57 mm) sets the standoff from the surface, which influences how much hand room exists between the pull and the face when gripping from different angles. The 1-3/16 inch (30 mm) width and matching 1-3/16 inch base width establish the footprint on the door, which helps determine edge clearances around neighboring fronts or trim. Base length of 1-1/8 inches (29 mm) defines the height of the mounting pads, guiding placement when aligning this pull with stiles, rails, or panel details.

Using This 18 Inch Appliance Pull In Projects

Where The Amerock Revitalize Appliance Pull Fits Best

This Amerock Revitalize Series black bronze 18 inch center-to-center appliance pull serves large-scale fronts where a standard cabinet pull would appear undersized. The 18-7/8 inch (479 mm) overall length works well on tall pantry doors or integrated appliance panels because the handle spans more of the surface, which improves leverage on heavier fronts. As part of the Revitalize collection, the pull aligns visually with other pieces from the same line, which supports a consistent look across cabinet runs that mix standard doors with appliance-style faces. The black bronze finish delivers a dark tone suitable for designs pairing deep finishes with strong hardware lines, which is useful when matching or coordinating other black bronze components in a space.

The zinc material gives the pull a metal core suitable for decorative hardware applications, which helps the handle feel substantial in hand on repeated openings. With a 2-1/4 inch projection, the pull stands off the surface enough to grasp from above, below, or the side, which is important on tall doors where users approach from different positions. The 1-3/16 inch width provides a grip profile that reads as substantial on larger faces, which keeps the hardware from visually disappearing against wide doors. Each base measuring 1-1/8 by 1-3/16 inches defines a mounting pad that sits neatly on stile or panel areas, which supports balanced placement on both framed and slab-style fronts using the defined hole spacing.

Details That Support Repeatable Layout And Replacement

The defined 18 inch (457 mm) center-to-center measurement allows this BP55350BBR pull to replace existing 18 inch appliance pulls without altering the bore pattern, which is useful on retrofit projects where existing holes are already drilled. The precise 18-7/8 inch (479 mm) overall length gives installers a known end-to-end size, which helps align multiple pulls to adjacent door edges or trim for straight visual lines. A projection of 2-1/4 inches (57 mm) sets a repeatable standoff distance from the surface, which matters when matching this pull to nearby hardware with similar projection so doors and drawers present a unified profile.

The 1-3/16 inch (30 mm) width offers a consistent grip section that can be echoed with other pulls from the same collection, which aids in designing a coordinated hardware package using the same visual language. Base dimensions of 1-1/8 by 1-3/16 inches create a predictable bearing area at each screw location, which helps the pull sit square and resist rocking when tightened. The Amerock Corporation branding identifies the manufacturer, which is useful when matching this handle to other Amerock decorative hardware components on the same project by finish, style, or series name.

Common Questions About The BP55350BBR Appliance Pull

Selecting This Pull For Appliance-Style Fronts

The Amerock Revitalize appliance pull with 18 inch center-to-center spacing, zinc construction, and black bronze finish gives installers a defined, large-format handle for tall doors and appliance panels. With known dimensions for overall length, projection, width, and base size, this BP55350BBR pull supports consistent drilling, alignment, and visual coordination across a project. For jobs needing an 18 inch center-to-center black bronze appliance pull from the Revitalize collection, this model provides a clearly specified option ready to integrate into cabinet and appliance front layouts.