Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Alto brushed nickel pull is a steel cabinet handle designed around an 11-5/16 inch center to center dimension, so it spans wider drawer fronts or doors with a single, consistent mounting layout. The Alto Series identity signals a coordinated decorative hardware style, helping maintain a unified look across multiple cabinets. Its brushed nickel finish diffuses light along the pull, which visually softens reflections and supports a clean, modern appearance on doors and drawers. The steel construction gives the pull a solid feel in the hand, which suits frequently used kitchen or shop cabinets. With a length listed at 13-1/4 inches, the pull extends beyond the mounting points, creating extra gripping area for larger hands or for opening heavier drawers. A projection of 1-1/4 inches spaces the hand away from the cabinet face, which provides finger clearance when pulling.
The Alto pull 288mm center to center dimension, listed as 11-5/16 inches, defines the distance between the two mounting holes, which guides drilling jigs and template setups for cabinet fronts. An 8-32 x 1 inch screw size is specified, so the handle is configured for threaded engagement into cabinet material using that screw length and thread. The 1-1/4 inch projection works with this mounting to hold the grip out from the door or drawer, which affects how the hand approaches the pull. With a 3/8 inch base dimension at each end, the contact area at the cabinet surface is compact, which influences where the pull lands relative to edges or rails in a layout.
This Alto series cabinet handle is identified as part of the Handles and Pulls category from Berenson Corporation, so it is suited to doors and drawers where a pull-style grip is preferred. The 11-5/16 inch center to center spacing positions this handle for wider cabinet fronts, which is common on kitchen base cabinets or longer drawer faces. Its overall 13-1/4 inch length visually stretches across more of the front, which can help balance proportions on taller or broader doors. The brushed nickel finish gives the pull a muted metallic look, which coordinates with other brushed nickel decorative hardware and moldings in the same space.
The width of 3/8 inch keeps the handle visually light, which can be useful on modern cabinet designs where a low-profile line is desired across multiple fronts. With a projection of 1-1/4 inches, the pull provides enough stand-off for fingers to wrap behind the bar, which is useful on thicker drawer fronts. As part of the Alto Collection, this handle can align with other Alto pieces on nearby cabinets, which supports consistent styling from one cabinet bank to the next.
The specified 11-5/16 inch, or 287 mm, center to center measurement allows repeated drilling locations across cabinet runs, which supports reliable alignment when using jigs or shop-built templates. A base dimension of 3/8 inch at each mounting point defines the footprint resting on the cabinet surface, which helps determine how close the handle edge can run to stiles or rails without overlapping profiles. The pull length of 13-1/4 inches means that, once installed, the ends extend beyond the mounting holes, which can assist with grabbing the pull from different positions along the bar.
The steel material uses metal construction for the handle body, which gives the pull weight and firmness when opening frequently used cabinet sections. The brushed nickel finish on that steel surface softens fingerprints relative to a mirror finish, which can help maintain a more even appearance over time on high-traffic doors. With a projection set at 1-1/4 inches, the working clearance between the cabinet face and the gripping edge stays constant from one installation to another, which supports predictable spacing when aligning this pull across multiple rows of cabinetry.
The Berenson Alto brushed nickel pull has an 11-5/16 inch, or 287 mm, center to center measurement, which sets the drilling distance between mounting holes for consistent cabinet layout.
The Alto Series handle length is listed at 13-1/4 inches, so the bar extends beyond the mounting points and offers a longer gripping surface across the cabinet front.
This Alto pull is made from steel with a brushed nickel finish, which provides a solid metal feel and a softened metallic look on cabinet doors and drawers.
The 7922-2BPN-P pull has a 1-1/4 inch projection, creating working clearance between the grip and cabinet surface for fingers when opening doors or drawers.
This Berenson Alto handle is specified with 8-32 x 1 inch screws, so the mounting is sized for that machine screw thread and length through typical cabinet fronts.
The pull has a width of 3/8 inch, giving it a slim profile that still provides a defined edge for gripping along the cabinet front.
The Berenson Alto brushed nickel pull, identified as model 7922-2BPN-P, combines a steel body with an 11-5/16 inch center to center layout, which suits wider cabinet fronts where consistent drilling is important. Its 13-1/4 inch overall length and 1-1/4 inch projection create a comfortable gripping area, while the 3/8 inch width keeps the profile clean across doors and drawers. For projects built around Alto Collection styling and brushed nickel decorative hardware, this handle provides a defined set of dimensions to align your cabinet fronts with the look and spacing you want.
Sold In: 1 Each
