Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Echo brushed nickel pull is a zinc cabinet handle built for projects that call for a 3-3/4 inch (96 mm) center to center layout, so it lines up with standard drilling patterns on many cabinet and drawer fronts. The brushed nickel finish on this pull provides a muted metallic look that helps reduce the appearance of fingerprints during everyday use in kitchens, baths, and shop-built casework. Its zinc construction gives you a solid-feeling pull that supports repeated opening and closing of doors and drawers in busy spaces. With a projection of 1-1/4 inch, the pull stands off the front enough to get a comfortable grip without crowding nearby fronts. A width of 3/4 inch offers a substantial surface for fingers, which helps with confident operation on heavier fronts. The Echo collection design ties multiple cabinets together, so runs of hardware stay visually consistent across the job.
This Echo 96mm center to center pull is designed around the 3-3/4 inch hole spacing, so it suits layouts already drilled to that common standard across doors and drawers. The 5-9/16 inch overall length helps you plan edge clearances at stile joints and between adjacent fronts, reducing the chance of hardware crowding. With a 1-1/4 inch projection, the pull provides usable space for fingers without extending so far that it becomes a snag point along walkways. The 3/4 inch width and 1-1/16 inch base diameter work together to spread contact over the door surface, which helps the pull sit visually balanced on narrow rails as well as wider drawer fronts.
The Echo series cabinet hardware layout centers on the 3-3/4 inch (96 mm) center to center measurement, so this pull fits projects built around that widely used drilling dimension on doors and drawers. The zinc material suits interior cabinet, vanity, and furniture applications where a metal pull is preferred for daily handling. With a 5-9/16 inch overall length, the pull spans a practical portion of typical drawer and door widths, which helps it look proportional on both smaller bath cabinets and mid-sized kitchen fronts. The 1-1/4 inch projection keeps the grip comfortably away from the front, supporting use on thicker fronts where extra clearance matters for fingers. Its brushed nickel finish coordinates with many common brushed nickel and satin nickel hinges and other decorative hardware, so visible components across the installation can share a consistent tone.
The Echo 96mm center to center pull arrives sized for the 3-3/4 inch drilling pattern, which simplifies replacement of existing pulls that share this spacing during remodel work. The 8-32 x 1 inch screw size specification calls out a standard machine thread and length often used in cabinet doors and drawer fronts, which supports straightforward fastening into typical panel thicknesses. That screw length helps engage enough thread for a secure hold while limiting excess protrusion inside the cabinet. The 1-1/16 inch base diameter gives each mounting point a defined bearing surface, helping keep the pull aligned square to the edge during tightening. With a 3/4 inch wide gripping area, installers and users get a defined contact surface that helps reduce hand slip when operating heavier drawers. The combination of brushed nickel finish and Echo collection styling helps maintain visual alignment when pairing this pull with other Echo series pieces across a full room layout.
The Berenson Echo brushed nickel pull has a 3-3/4 inch (96 mm) center to center measurement, which matches many pre-drilled cabinet and drawer layouts for straightforward placement.
The Echo 96mm center to center pull has an overall length of 5-9/16 inch, giving a footprint that suits a wide range of cabinet doors and drawers.
The 9225-1BPN-P cabinet pull has a projection of 1-1/4 inch, creating finger clearance from the cabinet face for comfortable gripping.
This Echo series pull is made from zinc with a brushed nickel finish, giving a metal feel with a muted metallic appearance on cabinets.
The cabinet pull is specified with 8-32 x 1 inch screws, matching a common machine screw thread and length used in many cabinet installations.
The Berenson Echo pull has a width of 3/4 inch, offering a defined gripping surface for opening and closing doors and drawers.
The Berenson Echo brushed nickel pull with 3-3/4 inch (96 mm) center to center spacing, 5-9/16 inch overall length, and 1-1/4 inch projection gives you a defined, repeatable hardware choice for cabinet doors and drawers. Its zinc construction, 3/4 inch width, and 1-1/16 inch base diameter work together to support dependable gripping across daily use. The brushed nickel finish ties into other brushed cabinet components, helping keep hardware consistent from piece to piece. For projects built around the Echo collection and 96 mm drilling, this 9225-1BPN-P pull offers a straightforward way to keep layouts aligned from the shop to final installation.
Sold In: 1 Each
