VMI 42 Inch Cherry Arched Raised Panel Range Hood
VMI 42 inch cherry arched raised panel range hood describes a 42 inch wide, wall mount wood range hood built in an arched raised panel style, so it visually matches traditional kitchen cabinet designs while creating a defined focal point over the cooking area. The hood is part of VMI's premium line of wood range hoods, which gives installers and shop builders a consistent product family to work with across different kitchen projects. It is made of unfinished wood, so the cherry surface can be stained or finished to align with surrounding cabinetry and trim work on site. The hood is classified under wood range hoods and mounts on the wall, making it suitable for layouts where the cooktop is against a wall rather than in an island. The manufacturer part number FDWHAP 42 C clearly identifies the cherry arched raised panel 42 inch model for ordering and job documentation.
Key Wood Hood Details For Project Planning
- This hood is made of unfinished wood, which allows field finishing in cherry tones that coordinate with other VMI cherry components or custom cabinet finishes during installation.
- The hood belongs to VMI's premium line of wood range hoods, giving fabricators a recognizable product series when specifying matching wood ventilation solutions across multiple kitchen layouts.
- The design is an arched raised panel style, providing a shaped front profile that aligns with raised panel cabinet doors and helps maintain a unified facade along the wall run.
- Arched raised panel hoods in this line are available in four widths - 32-1/2, 38-1/2, 44-1/2, and 50-1/2 inches - so designers can select a proportional hood width relative to cooktop size and surrounding cabinetry.
- All of the hoods in this family are designed to work with specific VMI ventilators, which simplifies specification when selecting blower units that properly align with the wood structure.
- The hood fits within the wood range hoods category, making it suitable for cabinet-based kitchen projects where a wood-clad ventilation solution is desired instead of a fully exposed metal unit.
Installation Interface And Liner Integration Details
This arched raised panel wall mount range hood is designed to work with VMI ventilators in the 260 CFM FFBUF-04 Series, 350 CFM FFBUF-02A Series, 350 CFM FFBUF-021 Series, and 670 CFM FFBUF-06 Series, so installers can select blower performance while staying within the intended system. All liners for this hood line only work with VMI ventilators, which aligns the metal liner dimensions and mounting interfaces to the blower units and the surrounding wood shell. Liners for FFBUF-04, 02A, and 021 Series ventilators are available in white, black, biscuit, silver metallic, and stainless steel finishes, giving flexibility in the exposed metal appearance inside the hood opening. Liners for FFBUF-06 Series ventilators are available in stainless steel finish only, which pairs with the higher 670 CFM ventilator option in installations needing that airflow.
Using This VMI Wood Range Hood In Kitchen Projects
Where This Arched Raised Panel Hood Works Best
This VMI wood range hood is categorized as a kitchen and bath cabinet wood range hood, so it fits projects where the ventilation system is visually integrated into the cabinet layout rather than standing alone as a metal appliance. The 42 inch nominal width makes it suitable for cooktops or ranges where a wider wood structure balances adjacent wall cabinets. Arched raised panel hoods in this VMI line are offered in widths of 32-1/2, 38-1/2, 44-1/2, and 50-1/2 inches, so this 42 inch class model sits within a broader size range that allows consistent styling across different kitchen configurations. The hood is made from unfinished cherry, which allows finishing trades to apply stains or clear coatings that match cherry cabinetry, paneling, or trim in the same room.
All hoods in this VMI series are designed to work with VMI ventilators, specifically the 260 CFM FFBUF-04 Series, 350 CFM FFBUF-02A Series, 350 CFM FFBUF-021 Series, and 670 CFM FFBUF-06 Series, which ties the wood structure to a defined set of blower units. Because the wood hood is part of VMI's premium line, installers who have used other VMI wood range hoods can maintain similar construction and installation habits across projects. The kitchen and bath cabinet accessory classification indicates that this hood is intended to integrate with cabinet-based layouts, making it a natural choice for custom shop-built kitchens centered around wood casework.
Details That Support Consistent Installation Results
The requirement that liners are a required component and are sold separately means the installation workflow is built around pairing this wood hood with a dedicated liner matched to the selected VMI ventilator. All liners only work with VMI ventilators, so the liner geometry, mounting, and clearances are coordinated with the FFBUF-04, FFBUF-02A, FFBUF-021, and FFBUF-06 blower series used inside the wood shell. Liners for the FFBUF-04, 02A, and 021 Series ventilators are made of metal, with finishes of white, black, biscuit, silver metallic, and stainless steel, allowing interior metal surfaces to be chosen for visual preference or to coordinate with adjacent appliances.
Liners for FFBUF-06 Series ventilators are available in stainless steel finish only and are described as being made of stainless steel, which corresponds directly to the higher capacity 670 CFM ventilator option in the VMI range. The hood itself is made of unfinished cherry wood, giving cabinetmakers a substrate that can be sanded and finished along with surrounding cherry doors and face frames. The specific manufacturer part number FDWHAP 42 C precisely identifies this 42 inch cherry arched raised panel wall mount hood within the VMI catalog, which simplifies ordering, job submittals, and replacement matching when documenting installed products on project drawings.
Common Questions About The VMI Cherry Range Hood
What type of product is the FDWHAP 42 C range hood?
The FDWHAP 42 C range hood is a VMI 42 inch wide cherry arched raised panel wall mount wood range hood, so it functions as a cabinet-style ventilation shell over a cooktop or range.
What ventilators are designed to work with this wood hood?
The hood is designed to work with VMI ventilators in the 260 CFM FFBUF-04 Series, 350 CFM FFBUF-02A Series, 350 CFM FFBUF-021 Series, and 670 CFM FFBUF-06 Series, aligning blower units with the wood structure.
Is this VMI wood range hood unfinished or prefinished?
The VMI 42 inch cherry arched raised panel range hood is made of unfinished wood, allowing the cherry surface to be stained or finished to coordinate with surrounding cabinetry and trim work.
What wood species options exist for this VMI hood line?
VMI's premium line of wood range hoods is available in four species: red oak, maple, hickory, and cherry, providing multiple wood options for matching different cabinet programs.
What liner finishes are available for compatible VMI ventilators?
For FFBUF-04, 02A, and 021 Series ventilators, liners are offered in white, black, biscuit, silver metallic, and stainless steel. For FFBUF-06 Series ventilators, liners are available in stainless steel finish only.
How are the liners constructed for this hood system?
Liners for this hood system are made of metal, except the stainless steel finish versions, which are made of stainless steel, providing a durable metal interior surface around the VMI ventilator.
Select This Hood For Coordinated VMI Installations
The VMI 42 inch cherry arched raised panel range hood offers a wall mount wood shell that matches cabinet-style kitchens while pairing with defined VMI ventilator series. With unfinished cherry construction, a premium wood range hood classification, and liners designed as required components that only work with VMI ventilators, this model suits projects where coordinated blower, liner, and wood hood elements are specified together. Use the FDWHAP 42 C part number when ordering or documenting this 42 inch cherry arched raised panel VMI wood range hood for kitchen and bath cabinet installations.
