VMI 48 Inch Maple Arched Raised Panel Wall Mount Range Hood
VMI 48 inch maple arched raised panel wall mount range hood describes a wood range hood built from maple and sized for 48 inch width cabinet runs. The hood is part of VMI's premium line of wood range hoods, so it aligns with their ventilator and liner system for a coordinated installation. The arched raised panel design gives a defined architectural profile across the front, which helps match raised panel cabinet doors in the same kitchen run. The hood is made of unfinished wood, allowing field finishing so the maple can be stained or painted to coordinate with surrounding cabinetry and trim. As a wall mount range hood, it is intended to be installed on a wall over a cooking surface, tying into the ducting layout planned for that location.
Maple Hood Details That Support Kitchen Layout
- This VMI wood range hood is made of unfinished wood, which allows the maple surface to be finished on site to match existing or new cabinet finishes for a consistent run.
- The hood is part of VMI's premium line of wood range hoods, so it is designed to work within their ventilator and liner system for coordinated performance and visual alignment.
- Arched raised panel hoods in this line are available in widths of 32-1/2 inch, 38-1/2 inch, 44-1/2 inch, and 50-1/2 inch, which supports planning a consistent style across different cooktop widths.
- All of the hoods in this series are designed to work with specific VMI ventilators, so the installer can select a CFM level while keeping the same maple hood style.
- Liners for FFBUF-04, 02A, and 021 Series ventilators are available in finishes such as White, Black, Biscuit, Silver Metallic, and Stainless Steel, which lets the visible metal surface coordinate with appliance or trim choices.
Wall Mount Hood And Liner Interface For Installers
This maple arched raised panel hood is identified as a wall mount range hood, so it is configured to be mounted on a wall above the cooking area rather than in an island application. All of the hoods in this VMI line are designed to work with specified ventilators, including 260 CFM FFBUF-04 Series, 350 CFM FFBUF-02A Series, 350 CFM FFBUF-021 Series, and 670 CFM FFBUF-06 Series, which defines the blower options that physically integrate with the hood body. All liners in this system are designed to work only with VMI ventilators, aligning the installation interfaces between the hood, liner, and ventilator for a matched setup.
Applying This VMI Maple Wood Range Hood In Projects
Where This Arched Raised Panel Hood Fits Best
This 48 inch maple arched raised panel wall mount range hood fits into the VMI wood range hoods category, so it is intended for kitchen and bath cabinet layouts where a wood hood is part of the design. It is built from maple in an unfinished state, so it can be field-finished alongside maple cabinets to match door styles, face frames, and crown profiles. Because arched raised panel hoods in this series are offered in widths of 32-1/2 inch, 38-1/2 inch, 44-1/2 inch, and 50-1/2 inch, the same design language can carry through multiple kitchen zones that use different cooking widths. All of the hoods are designed to work with VMI ventilators, so a project that already specifies FFBUF-04, 02A, 021, or 06 Series ventilators can use this maple hood as the wood facing element at 48 inch width.
Details That Support Ventilator And Liner Coordination
The FDWHAP 48 M maple hood is defined as part of VMI's premium line of wood range hoods, which means it is set up to pair with their specified ventilators and liners for a complete assembly. All of the hoods in this line are designed to work with VMI ventilators rated at 260 CFM, 350 CFM, or 670 CFM, covering the FFBUF-04, 02A, 021, and 06 Series, so the installer can align airflow needs with the hood design. All liners in this system are built to work only with VMI ventilators, which keeps the connection points and sizing consistent when fitting the metal liner into the maple hood shell. Liners for FFBUF-04, 02A, and 021 Series ventilators are available in White, Black, Biscuit, Silver Metallic, and Stainless Steel finishes, while liners for FFBUF-06 Series ventilators are available in Stainless Steel finish, giving a choice of visible metal appearance around the cooking surface. Liners are made of metal, and the Stainless Steel finish options are made of stainless steel, so the exposed interior surface around the ventilator is a metal construction suited to the cooking zone.
Common Questions About This VMI Maple Range Hood
What type of product is the FDWHAP 48 M hood?
The FDWHAP 48 M is a VMI 48 inch maple arched raised panel wall mount range hood, so it serves as the wood hood structure over a cooking area.
Is this VMI maple hood finished or unfinished?
This VMI maple range hood is made of unfinished wood, so the maple surface can be finished on site to coordinate with surrounding cabinetry or trim systems.
Which ventilators are designed to work with this hood?
This hood is in a line where all hoods are designed to work with VMI ventilators: 260 CFM FFBUF-04, 350 CFM FFBUF-02A, 350 CFM FFBUF-021, and 670 CFM FFBUF-06 Series units.
Do the liners for this hood work with other ventilator brands?
Liners in this VMI system will only work with VMI ventilators, so the liner-to-blower interface is built around those specific ventilator series.
What finishes are available for liners used with this hood?
Liners for FFBUF-04, 02A, and 021 ventilators are offered in White, Black, Biscuit, Silver Metallic, and Stainless Steel, while FFBUF-06 liners are available in Stainless Steel finish.
What material are the liners made from in this system?
Liners in this VMI system are made of metal, and those in Stainless Steel finish are made of stainless steel, providing a metal interior surface around the cooking zone.
Choose This Maple Hood For Coordinated VMI Installations
The VMI 48 inch maple arched raised panel wall mount range hood FDWHAP 48 M provides an unfinished maple wood shell that aligns with VMI ventilators and liners. Select this hood when a 48 inch wall mount wood design needs to coordinate with the defined VMI blower and liner options.
