48 Inch Hickory Arched Raised Panel Hood For Kitchens
48 inch hickory arched raised panel hood from VMI, Inc. provides a wall mount wood range hood solution built around an arched raised panel profile in unfinished hickory, which lets you match custom cabinet finishing schedules on site. As part of VMI's premium line of wood range hoods, this model sits in a dedicated program designed for kitchen and bath cabinet projects where wood hoods coordinate with surrounding casework. The hood is specified as a wall mount range hood, so it is intended to be mounted against a wall above a cooking surface in a typical upper cabinet run. Unfinished hickory construction gives you a strong visual grain and a ready-to-finish surface, which supports stain or clear finishes selected to align with existing or new hickory cabinetry.
Key Wood Range Hood Details For Installers
- The hood is part of VMI's premium line of wood range hoods, so it fits into a consistent program when multiple hood sizes or wood species are required on the same job.
- All hoods in this line are made of unfinished wood, giving finish shops control over stain or paint schedules to match surrounding cabinetry and trim details.
- Arched raised panel hoods in this series are available in four widths: 32-1/2 inch, 38-1/2 inch, 44-1/2 inch, and 50-1/2 inch, which supports layout planning across different cooktop sizes.
- The product is categorized as a wood range hood for kitchen and bath cabinet applications, aligning it with standard cabinet design practices and wall cabinet elevations.
- The hood is designed to work with specific VMI ventilators and liners, which creates a defined system for airflow, cutout planning, and duct transitions.
Wall Mount Hood And Liner System Fit Details
This VMI wood range hood is specified as a wall mount range hood, so installation centers on positioning it against a wall over the cooking zone within an upper cabinet layout. The hood is designed to work with VMI ventilators rated at 260 CFM (FFBUF-04 Series), 350 CFM (FFBUF-02A Series), 350 CFM (FFBUF-021 Series), and 670 CFM (FFBUF-06 Series), which defines the compatible blower choices when designing ventilation performance. All liners in this system are engineered to work only with VMI ventilators, creating a matched hood, liner, and ventilator assembly that simplifies mechanical coordination once the correct series is selected and located.
Using This VMI Wood Range Hood In Projects
Where This Hickory Wall Mount Hood Is Applied
This VMI 48 inch hickory arched raised panel hood is part of a wood range hood category targeted to kitchen and bath cabinet projects, so it fits naturally into layouts that use wood casework as the visual anchor above cooking equipment. Because all hoods in the line are made of unfinished wood, this model supports projects where the finisher wants hickory grain to read consistently with neighboring cabinet doors, drawer fronts, and applied panels. The arched raised panel style gives the hood a defined architectural profile that integrates with raised panel door programs, which helps maintain a unified door and hood language across a full kitchen. The specified wall mount configuration focuses its use above ranges or cooktops placed against a wall, allowing the hood to align with adjacent wall cabinets and trim details in a standard cabinet run.
Why The Liner And Ventilator Details Matter
All of the hoods in this VMI program, including the FDWHAP 48 H, are designed to work with VMI ventilators in the FFBUF-04, FFBUF-02A, FFBUF-021, and FFBUF-06 Series, so ventilation selection stays within a defined product family with known CFM ratings. Liners are required components in this system and are sold separately, which means the hood is intended to operate with a dedicated metal or stainless steel liner rather than direct mounting a ventilator to bare wood. Liners for FFBUF-04, 02A, and 021 Series ventilators are available in five finishes: White, Black, Biscuit, Silver Metallic, and Stainless Steel, giving flexibility to coordinate visible metal surfaces with appliance colors or trim choices. Liners for FFBUF-06 Series ventilators are available in Stainless Steel finish only, which pairs with the higher 670 CFM ventilator option where a stainless presentation at the capture area is desired. All liners are made of metal, except the Stainless Steel finish which is made of Stainless Steel, so the capture zone around the ventilator presents a durable metal surface rather than exposing unfinished hickory to the cooking environment.
Common Questions About This VMI Hickory Hood
What is the VMI FDWHAP 48 H hood designed to do?
The VMI FDWHAP 48 H is a 48 inch unfinished hickory arched raised panel wall mount wood range hood, providing a dedicated wood housing above a cooking surface in kitchen and bath cabinet projects.
How is this hickory range hood installed in a kitchen?
The VMI 48 inch hickory arched raised panel hood is specified as a wall mount range hood, so it is mounted against a wall above the cooking area within a standard upper cabinet run.
Which ventilators work with this VMI wood hood?
This VMI wood range hood is designed to work with VMI ventilators in the FFBUF-04 260 CFM Series, FFBUF-02A 350 CFM Series, FFBUF-021 350 CFM Series, and FFBUF-06 670 CFM Series.
Are liners required when using this hickory hood?
The VMI hood system specifies that liners are required components and are sold separately, so the hood is planned to operate with a dedicated metal or stainless steel liner around the ventilator.
What liner finishes are available for compatible ventilators?
Liners for FFBUF-04, 02A, and 021 Series ventilators are available in White, Black, Biscuit, Silver Metallic, and Stainless Steel, while FFBUF-06 Series ventilators use liners in Stainless Steel finish only.
What materials are used for the hood and liner system?
The hood is made of unfinished wood in hickory, while liners are made of metal, with the Stainless Steel finish liners made of Stainless Steel around the ventilator area.
Selecting This Hood For VMI Ventilator Systems
The VMI 48 inch hickory arched raised panel wall mount range hood, FDWHAP 48 H, ties into a defined system of VMI ventilators and metal liners, giving you a coordinated path from wood hood shell to blower and capture surface. Unfinished hickory construction lets finishing teams match stain or clear coatings to surrounding hickory cabinetry, which keeps the hood visually integrated in raised panel kitchen programs. When a project calls for a 48 inch wood wall mount hood in hickory that works with VMI FFBUF-04, FFBUF-02A, FFBUF-021, or FFBUF-06 Series ventilators and their specified liners, this model provides the configured wood component for that assembly.
