
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
10ft aluminum bypass door track describes this Hettich America Corporation 10' Aluminum Extruded By-passing Double Track 7002, built as sliding door hardware for .75" bypass doors so cabinet or closet doors can slide past each other instead of swinging out.
The double aluminum carrier tracks are extruded, creating two parallel paths for door carriers to run so two doors can move smoothly in front of and behind each other along the same opening.
Each track length is 10 feet, giving a continuous run for long openings so installers can span wider cabinet or wardrobe sections without piecing shorter track sections together.
The track belongs to the Builders Hardware | Sliding Door Hardware category, so it is designed as part of a sliding door system rather than a general-purpose profile, which helps it match typical bypass door layouts in woodworking projects.
The track is identified by manufacturer part number 50530 and track designation 7002, which helps match it to Hettich sliding door components and repeat the same layout across multiple jobs.
The double aluminum carrier tracks feature holes at every 11", giving a clear pattern for fastening along a header or support, which helps distribute load evenly and maintain straight alignment over the 10-foot span.
The recommended fasteners are #8 x 1-1/4" panhead screws, so the hole sizing and track thickness are intended to work with that screw size for a secure connection to typical wood framing or cabinet structures.
The track is a 10-foot extruded aluminum piece, which means installers handle one continuous section per opening, reducing joints that could create snags or misalignment for the sliding door carriers.
The product is identified as being for .75" bypass doors, so it is planned around door thickness that is common in many cabinet and closet projects, aligning the track geometry with typical panel sizes used by woodworkers.
This 10' Aluminum Extruded By-passing Double Track 7002 from Hettich America Corporation is part of the sliding door hardware class, which positions it for projects needing doors to slide in front of one another, such as cabinet, wardrobe, or similar bypass openings.
The track is described as for .75" bypass doors, indicating it is sized with that door thickness in mind so typical three-quarter-inch panels used in woodworking can run in the double aluminum carrier tracks without calling for unusually thin or thick door construction.
The double track format gives one channel for each door, so two doors can share an opening while each has a defined running path, which is useful on wider spans where overlapping access is needed without a swinging door arc.
The 10-foot length suits long cabinet runs or wide storage openings where a continuous bypass door system is preferred, letting installers plan layouts that cover substantial widths in one straight track section.
The product sits in the Builders Hardware | Sliding Door Hardware category at Wurth Baer Supply, indicating it is meant for woodworking and cabinet-related environments where sliding door assemblies are integrated into casework, closets, or storage installations.
The extruded aluminum construction provides a uniform track profile from end to end, so carriers in each channel encounter the same geometry along the full run, promoting consistent sliding action across the opening.
The double aluminum carrier tracks concentrate both sliding paths in a single profile, which simplifies layout at the header because both door lines are located and fastened together rather than aligning two separate tracks.
The holes at every 11" create a built-in spacing for screw locations, which helps installers maintain straightness and tension uniformly across the 10-foot span, reducing the chance of localized sag or waviness that could affect door travel.
The recommended #8 x 1-1/4" panhead screws match the hole and material combination, so the fasteners can seat the track firmly against a wooden support, helping the assembly handle the repeated sliding of bypass doors in everyday use.
The clear manufacturer part number 50530 and designation 7002 allow shops to specify the same sliding door track when repeating a successful detail across multiple projects, which supports consistent performance and predictable door behavior across a portfolio of installations.
The 10' Aluminum Extruded By-passing Double Track 7002 is described as for .75" bypass doors, so it is intended for typical three-quarter-inch-thick bypass door panels in sliding door applications.
The Hettich America Corporation track identified as part number 50530 is 10 feet long, allowing continuous sliding door hardware coverage across wider cabinet or closet openings.
The double aluminum carrier tracks have holes at every 11" and list recommended #8 x 1-1/4" panhead screws, so the track mounts by fastening through these holes into a suitable supporting structure.
This product is described as double aluminum carrier tracks and a by-passing double track, meaning it provides two separate channels so two doors can slide past each other within one opening.
The aluminum track has holes at every 11", providing a regular spacing pattern that supports even fastening and alignment over the entire 10-foot length.
This 10' Aluminum Extruded By-passing Double Track 7002 is from Hettich America Corporation and is offered by Wurth Baer Supply as part of its sliding door hardware selection.
The 10' Aluminum Extruded By-passing Double Track 7002 brings a 10-foot, extruded aluminum, double carrier design tailored for .75" bypass doors, so it fits common cabinet and closet layouts while providing two defined sliding paths in one profile.
Holes at every 11" and recommended #8 x 1-1/4" panhead screws streamline fastening across the span, so installers can mount the Hettich 50530 track accurately in woodworking projects supplied by Wurth Baer Supply.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | HT7002-12 Mfr# 50531 | 12' Aluminum Extruded By-passing Double Track 7002 | ||||
Sold in: 1 Each | HT7002-16 Mfr# 50532 | Sliding Bypass Door Hardware Components Double Carrier Tracks, 16' | ||||
Sold in: 1 Each | HT7002-4 Mfr# 50526 | 4' Aluminum Extruded By-passing Double Track 7002 | ||||
Sold in: 1 Each | HT7002-5 Mfr# 50527 | 5' Aluminum Extruded By-passing Double Track 7002 | ||||
Sold in: 1 Each | HT7002-6 Mfr# 50528 | 6' Aluminum Extruded By-passing Double Track 7002 | ||||
Sold in: 1 Each | HT7002-8 Mfr# 50529 | 8' Aluminum Extruded By-passing Double Track 7002 |