6' Aluminum Extruded By-passing Double Track 7002

6' Aluminum Extruded By-Passing Double Track 7002 Use

6' aluminum extruded by-passing double track 7002 is a Hettich America Corporation aluminum carrier track designed for sliding door hardware setups that need two by-passing door runs on a single header line. The double aluminum carrier tracks give two parallel channels so doors can slide past each other instead of swinging, which helps when working in tight cabinet or closet spaces. The 6 foot length supports typical residential or light commercial door spans where a continuous top track is needed for smooth travel. Being part of builders hardware and sliding door hardware means it is intended for structural mounting above doors, so it forms the guiding backbone for rollers or hangers used in these assemblies. The extruded aluminum construction creates a consistent profile along the full 6 feet, which supports even alignment of door carriers and predictable sliding motion across the opening.

Key Details Of This Sliding Door Track

• The track is a double aluminum carrier configuration, which provides two sliding paths for by-passing doors so each leaf can travel on its own line without interference.
• The track length is 6 feet, giving a continuous run for many standard-width openings where a single piece reduces joint alignment issues along the door travel path.
• The track has holes at every 11 inches, so fastener locations are regularly spaced to help distribute load along the header and simplify repeated mounting points.
• The track is part of sliding door hardware, so it is intended to serve as the guiding component for door carriers in overhead sliding installations where controlled movement is important.
• Hettich America Corporation is the specified brand, which links this track to a known sliding door hardware line that installers use across coordinated components.

Mounting Pattern And Fastener Detail Focus

The double aluminum carrier tracks with holes at every 11 inches are laid out so that each pre-positioned hole can receive a fastener, giving a repeating pattern across the full 6 feet. This 11 inch spacing helps create consistent support points, which matters when aligning the track on wood or similar framing members. The recommended fasteners are #8 x 1-1/4" panhead screws, so the shank diameter and length are identified for this profile and typical backing substrates. Using a panhead profile relates directly to bearing surface at the track face, which helps the screw head clamp the aluminum extrusion without pulling through the hole when doors are in motion. Together, the fixed hole spacing and named screw size define a straightforward mounting approach that supports repeatable layouts across multiple openings.

Using This Double Track In Sliding Door Runs

Where This 6 Foot Double Track Fits Best

This 6' aluminum extruded by-passing double track 7002 is part of builders hardware and sliding door hardware, so its role is at the top of openings where doors need guided horizontal travel. The double aluminum carrier tracks provide two parallel routes, which suits by-passing door layouts such as paired panels on closets, cabinets, or similar openings that benefit from overlapping movement. At 6 feet in length, the extrusion spans many common door widths in a single piece, which reduces transitions that might affect carrier movement. The continuous aluminum profile supports door hardware that runs along the full opening, allowing carriers to traverse without encountering changes in track geometry. Because the track is tied to Hettich America Corporation under part number 50528, it aligns with sliding door hardware components that reference this geometry for proper carrier engagement.

Details That Support Repeatable Sliding Performance

The double aluminum carrier tracks with holes at every 11 inches establish a consistent pattern for fastening, which supports straight alignment when the track is applied to framing or structural members. Regular hole spacing helps installers maintain a uniform bearing surface along the 6 foot run, which can reduce deflection where doors roll. The extruded aluminum construction creates a rigid and uniform channel profile for carriers, so rollers or similar hardware encounter the same guiding surfaces from end to end. The recommended #8 x 1-1/4" panhead screws are matched to these holes, giving a defined fastener size that suits the track thickness and typical backing depth. Panhead screws present a broad head that seats against the aluminum, which helps retain the track securely as sliding loads cycle during door operation.

Common Questions About This Hettich Door Track

Selecting This Track For Your Sliding Opening

The 6' aluminum extruded by-passing double track 7002 from Hettich America Corporation provides double aluminum carrier tracks, a 6 foot continuous run, and holes at every 11 inches with recommended #8 x 1-1/4" panhead screws. These verified details define how it mounts and how it guides by-passing doors in sliding door hardware applications. For projects that align with this 6 foot span, double-channel layout, and stated hole pattern, this track offers a clearly specified top guide component ready to match your sliding door hardware design.