16' Double Track 7003

16' Double Track 7003 For Bi-Pass Doors

16' Double Track 7003 is an extruded aluminum double carrier track designed for 1.375 inch bi-pass doors, so it provides a continuous running surface sized for standard overlapping door sets. The extruded aluminum construction creates a uniform profile along the 16 foot length, which helps sliding door carriers run smoothly across the full opening. As sliding door hardware in the Hettich America Corporation line, this track fits into projects where consistent brand components are preferred. The 16 foot length allows long spans to be handled in a single piece, which can reduce joints in the run where carriers might otherwise catch. Being part of the sliding door hardware category means it is intended as the upper guiding track in a bi-pass assembly where two doors share the same opening.

Key Track Details For Sliding Door Jobs

• The track is described as an extruded aluminum double carrier track, which provides two parallel running channels for bi-pass door carriers so two doors can move independently across the same opening.
• Holes are provided every 11 inches along the length, giving regular fastening points so the track can be secured at consistent intervals to support the doors evenly across the span.
• The track is specified for a 1.375 inch bi-pass door, so the profile is intended for door thicknesses in that range, helping align the doors correctly in a typical overlapping configuration.
• This product is classified as sliding door hardware under builders hardware, placing it in assemblies where doors need to slide rather than swing, which shapes how openings are framed and finished.
• The product is identified by Hettich America Corporation under manufacturer part number 50539, which supports repeat ordering and matching to existing Hettich sliding door installations in the field.

Mounting Characteristics Of This Sliding Track

The 16' Double Track 7003 uses pre-formed holes every 11 inches, which guides the spacing of fasteners across the full 16 foot run so the mounting pattern stays even. This regular hole pattern supports installation workflows where installers follow the existing layout instead of marking every location manually. The track description calls for #8 x 1-1/4 inch panhead screws as recommended fasteners, so the hole sizing and material thickness are intended to pair with that screw size. Using the recommended screw dimension helps the aluminum section clamp properly to the supporting structure at each 11 inch interval, which matters for how the track handles the operational loads of bi-pass doors during use.

How This Hettich Sliding Track Works In Practice

Track For 1.375 Inch Bi-Pass Door Installations

The 16' Double Track 7003 is described as a track for a 1.375 inch bi-pass door, so it is intended for installations using doors of that thickness in a sliding configuration. The double carrier design supports two door panels sharing one opening, letting one door pass in front of the other on parallel channels. In bi-pass layouts, this allows access to one side of the opening at a time while keeping both doors guided in the same header line. The 16 foot overall length lets the track span wide openings or multiple-door runs without needing to splice shorter sections, which can simplify alignment at the jobsite. By being classified as sliding door hardware within builders hardware, the track integrates into door systems where lateral movement within the opening is required instead of swing clearance into the room.

Design Details That Support Repeatable Track Results

The extruded aluminum construction of the 16' Double Track 7003 creates a consistent channel shape over the entire 16 foot length, which supports carriers running with similar engagement from end to end. Consistent extrusion helps reduce high or low spots within the running surface, which in turn supports smoother door travel in normal use. The holes every 11 inches establish a uniform fastener grid that helps control how the track seats against the supporting header, contributing to even load distribution along the span. The recommended #8 x 1-1/4 inch panhead screws match that hole layout and thickness, supporting a fastening pattern that relates directly to the track geometry. The Hettich America Corporation manufacturer part number 50539 identifies this exact track profile, which matters when matching existing installations or specifying a replacement within the same sliding door hardware series.

Common Questions About 16' Double Track 7003

Selecting This Track For Sliding Door Runs

The 16' Double Track 7003 from Hettich America Corporation combines a 16 foot extruded aluminum body, double carrier channels, and holes every 11 inches to support 1.375 inch bi-pass doors in sliding applications. When a project calls for a continuous sliding door hardware track identified by part number 50539, this model provides the specified dimensions and mounting pattern in a single component. Use this product page to align door thickness, sliding configuration, and fastening layout with the requirements of your sliding door opening before placing your order.