5' Aluminum Extruded By-passing Double Track 7003

5' Aluminum Double Track For Bi-Passing Doors

5' Aluminum Extruded By-passing Double Track 7003 is an extruded aluminum double carrier track designed for 1.375 inch bi-passing doors, so it provides a dedicated running channel for each door panel and keeps door movement separated on two tracks. The 5 foot length gives a continuous run for many standard openings, which reduces splices and helps doors travel smoothly along the full width of the opening. The extruded aluminum construction creates a consistent profile, so matching hardware can engage the track reliably along its entire length during repeated door movement. As part of the sliding door hardware category from Hettich America Corporation, this track works within a coordinated hardware system, helping installers match door panels and carriers to a known track profile on woodworking and building projects.

Sliding Door Track Details That Support Daily Use

• The extruded aluminum double carrier track construction provides a stable, uniform channel for both bypassing doors, which supports smoother rolling action and helps reduce side play during repeated opening and closing.
• The 5 foot track length covers many common residential and light commercial openings in a single piece, which limits joint transitions along the run and helps doors roll more quietly across the full opening width.
• The track is designed for 1.375 inch bi-passing doors, so door thickness and carrier layout can be planned around this dimension, helping installers achieve consistent clearances between overlapping doors.
• Holes every 11 inches are formed in the track, distributing fastener points along the run so the load is shared over the mounting surface and helping the track stay aligned under door weight.
• The track is part of Hettich America Corporation sliding door hardware, which gives installers a defined manufacturer part number (50534) to reference when coordinating carriers and related sliding components.

Mounting And Fastening Approach For This Track

The extruded aluminum double carrier track has mounting holes every 11 inches, giving installers a fixed fastening pattern that supports consistent attachment along the length of the track. This spacing helps the track bear the door load by tying it into the supporting structure at regular intervals, which supports straighter alignment when the doors are in motion. The web description recommends #8 x 1-1/4 inch panhead screws as fasteners, so the hole sizing and material thickness are suited to that screw size during installation. Using fasteners sized for the track profile helps the screw heads seat properly in the track, which keeps the running channels clear for the door carriers and supports unobstructed sliding along both paths.

Using This Hettich Bypassing Track In Projects

Where This Double Carrier Track Fits Best

The 5' Aluminum Extruded By-passing Double Track 7003 belongs to the sliding door hardware class, so it fits into applications where two door panels pass in front of each other on parallel tracks. Its design for 1.375 inch bi-passing doors aligns with typical interior sliding door thicknesses, which helps it integrate into woodworking projects such as closets, built-ins, or room dividers that use overlapping doors. The extruded aluminum body provides a rigid guide path for compatible carriers, so the track can support doors that need to travel fully open and fully closed along the 5 foot distance. Because it is identified by Hettich manufacturer part number 50534, this track can be specified directly on drawings or material lists, helping shops and installers tie a defined hardware component to their sliding door layouts with repeatable results from project to project.

Details That Help With Straight, Repeatable Door Travel

The extruded aluminum construction of the double carrier track gives each running channel a consistent interior profile, which allows properly matched door carriers to roll along the same path every time and supports predictable sliding performance. The double track layout separates the paths for the two bypassing doors, which helps the doors overlap cleanly and reduces interference between panels during operation. Holes every 11 inches along the track set a regular fastening schedule, which helps the installer keep the track pulled tight to the mounting surface and reduces the chance of dips or waves that could affect door travel. When fastened with the recommended #8 x 1-1/4 inch panhead screws, the head shape matches the track requirements, so the screw heads stay seated while leaving clearance for the carriers inside the track. As a sliding door hardware component from Hettich America Corporation, the part is defined within a known product class, helping tradespeople pair it with suitable sliding door components to support smooth, repeatable door motion in finished installations.

Key Questions About This Sliding Door Track

Select This Track For 1.375 Inch Bi-Passing Doors

The 5' Aluminum Extruded By-passing Double Track 7003 from Hettich America Corporation offers an extruded aluminum double carrier profile sized for 1.375 inch bi-passing doors, so it directly supports overlapping door layouts along a 5 foot run. Mounting holes every 11 inches and the recommended #8 x 1-1/4 inch panhead screws give a defined fastening pattern, helping the track stay aligned as part of a sliding door hardware assembly. For projects calling for a 5 foot aluminum double track with Hettich part number 50534, this component provides the specified sliding path for two bypassing door panels.