4' Aluminum Extruded By-passing Double Track 7003

4' Aluminum Track For Bi-Passing Doors

4' Aluminum Extruded By-passing Double Track 7003 gives you a dedicated aluminum track solution for 1.375 inch bi-passing doors, so a pair of doors can slide past each other cleanly on a defined path. The extruded aluminum construction forms a consistent double carrier track profile, so carriers run in repeatable channels that help reduce binding during door movement. As part of the Hettich America Corporation sliding door hardware line, this track matches common professional sliding door layouts, so it suits builders hardware projects where bi-passing door function is required. The 4 foot length provides a straight, continuous run for shorter openings or for modular use in larger assemblies, so you can plan spans that match cabinet or closet dimensions. Being in the sliding door hardware class means it is designed as a structural track component for sliding systems, so it works as the primary guide element in the door workflow.

Sliding Door Track Details That Support Work

• The extruded aluminum double carrier track creates stable, formed channels for the door carriers, which supports smoother sliding action and helps maintain alignment over repeated door cycles.
• The 4 foot track length provides a single, continuous run for shorter openings, which simplifies layout on cabinets or small wall openings where a longer section is not required.
• The track is designed for 1.375 inch bi-passing doors, which sizes the system for typical door thickness in many sliding applications, helping door pairs clear each other while sharing the same opening.
• Holes every 11 inches are built into the track, which spaces mounting points at regular intervals so the load is spread along the length for a more even, predictable support pattern.
• Hettich America Corporation branding ties the track to a known sliding door hardware line, which helps align it with other components in the same system family on a project.

Mounting Pattern And Track Installation Fit

The extruded aluminum double carrier track uses holes spaced every 11 inches, which sets a consistent mounting rhythm along the full 4 foot length so fasteners can follow a simple layout. This regular spacing helps installers tie the track into framing or cabinet structure without custom hole drilling for each position. The web description notes recommended fasteners as #8 x 1-1/4 inch panhead screws, which sizes the screw diameter and length to match the track profile and typical backing material thickness. Using a panhead pattern fits the track holes while keeping the head profile broad against the aluminum, which helps distribute clamping force along the mounting surface. The track designation for 1.375 inch bi-passing doors defines how the doors relate to the mounted track, so the thickness expectation is built into planning the clearance and carrier selection.

Using This Hettich Sliding Door Track

Where This Aluminum Double Track Fits Best

This extruded aluminum double carrier track from Hettich America Corporation is part of the sliding door hardware class, so it fits projects where two doors share one opening and need to pass each other on defined channels. The track is specified for 1.375 inch bi-passing doors, which lines it up with door builds that follow this thickness for closets, cabinets, or similar openings. The 4 foot length pairs well with shorter spans, so it suits installations like single cabinet bays or narrower wall openings without cutting down a much longer track. Being aluminum, the track body remains relatively light compared to many steel profiles, which matters when it is fastened overhead in a cabinet or closet framing run. The double track design means each door has its own carrier path, so one door can travel behind or in front of the other while staying guided.

Details That Support Repeatable Sliding Performance

The extruded aluminum construction forms the double carrier track profile in one continuous piece, which supports consistent channel geometry along the length for more predictable carrier motion. Holes every 11 inches define the fastening layout, so each section of the 4 foot track is tied back to structure at steady intervals that help control flex when doors are in motion. The recommended #8 x 1-1/4 inch panhead screws match typical backing depths and hole sizing, which helps the track clamp firmly to wood or similar framing without distorting the aluminum at each mounting point. Designing the track as sliding door hardware for 1.375 inch bi-passing doors means the geometry anticipates two doors sharing the opening, so the system supports overlapping travel while the track remains fixed. The defined part number 50533 links the component to the Hettich 7003 track identity, which helps keep replacements or expansions aligned with the same profile on future work.

Common Questions About This Sliding Door Track

Selecting This Track For Sliding Door Runs

The 4' Aluminum Extruded By-passing Double Track 7003 from Hettich America Corporation combines a defined 4 foot length, extruded aluminum body, and double carrier profile for 1.375 inch bi-passing doors, so it fits projects needing paired sliding doors on a controlled track. The built-in holes every 11 inches and the recommended #8 x 1-1/4 inch panhead screws give a clear mounting pattern, so layout and fastening can follow a straightforward rhythm across the span. For sliding door hardware work where a dedicated double track is required, this Hettich sliding door track offers a consistent geometry and specified door thickness, helping align field installation with planned door movement.