120" Aluminum Extruded By-passing Double Track 7003

120 Inch Aluminum Bypass Double Track For Doors

120 inch aluminum bypass double track gives you a full 10 foot run for bypassing doors, so longer openings are handled in one continuous piece. The track is an extruded aluminum double carrier design, which provides two parallel channels, so you can set up a true by-passing door system without improvising hardware. The track is built as sliding door hardware, so it fits directly into projects that call for a dedicated bypass layout. This model is identified as 7003, which ties it to a known Hettich layout for repeatable results on future jobs. The track is manufactured by Hettich America Corporation, so it aligns with common professional sliding door hardware selections. The 120 inch length and double configuration let you span wide cabinets or openings while keeping both doors on a single, consistent track line.

Sliding Door Hardware Details That Save Time

• The extruded aluminum double carrier track provides two channels in one profile, which simplifies layout when you need two doors to bypass each other without adding separate single tracks.
• The 10 foot length lets you cover long openings in one run, which reduces joints along the span and helps keep door travel smoother over the full width of the opening.
• Factory holes every 11 inches are built into the track, which gives you a regular fastening pattern and speeds layout because you do not have to mark repeated centers along the length.
• The recommended fasteners are #8 x 1-1/4 inch panhead screws, which ties the track directly to a specific screw size so you can match pilot drilling and holding strength to the metal profile.
• The track is part of the sliding door hardware category, which makes it a direct fit for sliding and bypass door projects in woodworking or similar installations.

Track Mounting And Screw Pattern In Practice

The extruded aluminum double carrier track uses a hole pattern every 11 inches, so screw locations are already laid out along the 120 inch length and fastener spacing stays consistent from end to end. That hole spacing lets you work down the line with a driver instead of measuring and marking each position, which tightens up installation time on larger openings. Because the recommended fasteners are #8 x 1-1/4 inch panhead screws, the track is already matched to a common screw diameter and head style, which supports good bearing on the aluminum surface. The 10 foot length keeps that pattern continuous, so each fastening point contributes to holding the track straight across the full span.

Using This Hettich Sliding Door Track 50537

Where This 1.375 Bypass Door Track Fits

The SAP description specifies this track for a 1.375 inch bi-pass door, which ties the double carrier channels to doors in that thickness range for proper running clearance. Because it is a bypassing double track, the layout lets one 1.375 inch door pass in front of another on separate channels, which supports wide access openings without swinging doors into the room. The 10FTALUM.TRACK designation highlights a continuous 10 foot aluminum length, which works well in long cabinet, closet, or similar straight-run applications where a single piece simplifies alignment. As sliding door hardware from Hettich America Corporation, the track fits into professional woodworking or construction projects that standardize around that manufacturer for service consistency.

Why This Extruded Aluminum Design Helps Accuracy

The track is described as an extruded aluminum double carrier track, which means the profile is formed in one pass, so both channels share the same straight reference for smoother bypass motion across the span. The holes every 11 inches are machined on that same extrusion, which keeps each fastening point aligned along the length and helps resist twisting under door load. When you use the recommended #8 x 1-1/4 inch panhead screws, the broad panhead bears on the aluminum surface, which helps clamp the profile evenly without digging in, so the running surface remains true for the carriers. The 120 inch length also supports accurate layout because end-to-end straightness is set by a single rigid piece, which reduces the chance of misalignment that can occur when multiple shorter tracks are joined.

Common Questions About This Double Track

Choose This Track For 1.375 Bypass Door Runs

This 10FTALUM.TRACK for 1.375 inch bi-pass door projects combines a 120 inch length, extruded aluminum double carrier design, and holes every 11 inches, so long bypass openings are handled with consistent support. The Hettich America Corporation part 50537 ties directly into professional sliding door hardware lines, which helps align installations across multiple jobs. For projects calling for a 1.375 inch bi-pass door track in a continuous 10 foot aluminum extrusion, this double track gives you a defined pattern, a known profile, and a straightforward path to a clean bypass layout.