Sliding Bypass Door Hardware - 150 lb Capacity Double Carrier Tracks, 12'

Sliding Bypass Door Hardware Track For Smooth Runs

sliding bypass door hardware in this configuration uses an extruded aluminum double carrier track to guide bypass doors along a fixed ceiling or header line, so doors travel in a controlled path that supports repeatable movement on built projects. The 12 foot length provides a continuous run for long openings, which reduces joint transitions along the span and supports a cleaner sliding feel on wider door sets. The track is designed for 1.375 inch bypass doors, aligning the carriers to that door thickness so doors ride correctly in relation to each other on parallel paths. Its 150 pound capacity rating defines the load this track is built to carry, which fits many residential and light commercial door panels in woodworking and cabinet applications. As Hettich America Corporation sliding door hardware, it ties into a recognized builders hardware line for door projects.

Key Track Details That Support Door Work

• The extruded aluminum construction forms a consistent track profile, which helps carriers run true along the length and supports predictable sliding performance across the 12 foot span on installed doors.
• The double carrier track layout provides two running channels, allowing a pair of bypass doors to slide past each other on separate paths and keeping door faces aligned in typical bypass configurations.
• The 12 foot overall length covers wide openings in a single piece, which reduces field splicing and helps maintain alignment across the run when laying out multiple bypass door panels on a project.
• Factory holes every 11 inches give regular fastening points along the track, spreading load into the mounting surface and supporting solid attachment for the rated 150 pound capacity in use.
• The 150 pound capacity rating defines the load this sliding door hardware is designed to carry, guiding door panel selection so the operating weight stays within the specified range for long-term function.

Installation Details For 12 Foot Track Mounting

This sliding door track is drilled with holes every 11 inches, so fastening locations are already laid out along the 12 foot length and speed positioning on a header or ceiling frame. The regular spacing helps distribute the 150 pound rated load, which supports even pull on the structure when doors are in motion or parked at one end. The track is designed for 1.375 inch bypass doors, which sets the relationship between the track position and the finished door faces so clearances follow typical bypass layouts. Extruded aluminum forms a straight profile along the length to support accurate alignment during installation, which is important when running two bypass doors on the same assembly.

Using This Hettich Sliding Door Track In Projects

Bypass Door Track For 1.375 Inch Panels

This Hettich America Corporation sliding bypass door hardware track is specified for 1.375 inch bypass doors, so it suits door panels built to that thickness in cabinet, closet, or similar opening layouts. The double carrier design gives each door its own running channel, which allows one panel to travel behind the other without interference and maintains a consistent overlap across the opening. The 12 foot length supports wide spans often found in wall closets or long built-in storage runs, allowing multiple panels to operate on a continuous track rather than segmented pieces. With a rated capacity of 150 pounds, the track supports many solid or composite door constructions that fall within that weight range, helping doors slide without overstressing the running system during everyday operation. The extruded aluminum body pairs reduced weight with structural form, which aids handling during installation while still providing a defined path for carriers once doors are hung.

Track Features That Support Reliable Operation

The extruded aluminum double carrier track uses a formed profile that keeps both running channels parallel, which helps door carriers track straight over the full 12 foot length and limits binding when panels cross at the center. Hole spacing every 11 inches gives installers frequent fastening points, which helps pull the track tight to the mounting surface and maintain a consistent plane for smooth sliding over time. By combining the 1.375 inch door specification with a 150 pound capacity, this sliding door hardware defines both thickness and load parameters, which supports repeatable results when standardizing on a door construction across multiple openings. The 12 foot continuous piece reduces the number of joints in the run, which can cut down on height variations or misalignment where carriers might otherwise catch. As a component from Hettich America Corporation in the sliding door hardware class, this track fits into a system approach for bypass door builds where predictable motion and aligned panels are priorities.

Common Questions About This Sliding Door Track

Selecting This Track For Sliding Bypass Runs

This extruded aluminum double carrier track from Hettich America Corporation brings a 12 foot length, 1.375 inch door specification, and 150 pound capacity together in one sliding bypass door hardware component. Holes every 11 inches streamline fastening and spread door loads along the header or support member. For woodworking and sliding door projects handled through Wurth Baer Supply, this track offers a defined path for bypass doors where consistent movement and alignment are important across wide openings.