Rev-A-Shelf 4DPBG Series 30-1/4"Wx21-1/4"Dx1/4"H Gray Drawer Peg Board, -4DPBG-3021-1

Choose a Rev-A-Shelf drawer peg board

Rev-A-Shelf drawer peg board gives cabinet drawers a customizable storage base for dishes, cookware, and other items that need to stay in place. This vinyl peg board from Rev-A-Shelf is a gray drawer peg board sized at 30-1/4 inches wide, 21-1/4 inches deep, and 1/4 inch high. The board has a sound dampening vinyl covering that is easy to maintain, and it works with wood pegs or chrome accessories sold separately. As part of the drawer inserts category, this revashelf insert can also be cut to size to fit cabinet dimensions. Buyers searching for a grey drawer peg board or RS4DPBG-3021-1 are typically looking for a drawer organization base they can adapt to a specific drawer layout.

See how vinyl peg board helps

• 30-1/4 inch width - Helps buyers match the Rev-A-Shelf drawer peg board to wider cabinet drawers before trimming or final layout.
• 21-1/4 inch depth - Gives the drawer insert a broad usable area for arranging pegs or compatible accessories inside a drawer.
• 1/4 inch height - Keeps the vinyl peg board low profile so it can sit inside a drawer without adding much height.
• Gray vinyl covering - Makes the drawer peg board easy to maintain while adding a sound dampening surface.
• Cut-to-size design - Lets installers trim the drawer insert to suit cabinet sizes when the drawer opening needs a custom fit.
• Works with wood pegs - Gives buyers the option to use a traditional peg layout with the Rev-A-Shelf board.
• Works with chrome accessories sold separately - Supports alternate storage setups for buyers who want accessory-based organization instead of wood pegs alone.
• Accessories are interchangeable with wood or vinyl peg boards - Helps maintain layout flexibility across compatible Rev-A-Shelf peg board setups.
• Packaged and sold each - Clarifies that the product is supplied as a single board for one drawer project at a time.

Confirm drawer inserts fit before ordering

Key specs to confirm: This Rev-A-Shelf drawer insert is listed at 30-1/4 inches wide, 21-1/4 inches deep, and 1/4 inch high. Buyers should compare those dimensions to the actual inside drawer space, not just the cabinet size. Because the board is described as cut to size, confirm how much trimming your installation requires and whether your drawer layout will use wood pegs or chrome accessories. If you are matching an existing setup, verify the exact model reference such as RS4DPBG-3021-1. Safety, load, compliance, and any installation tool requirements are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: One gray vinyl peg board is verified. Pegs and chrome accessories are not included and are sold separately.

What to verify before ordering: Check the inside drawer width and depth, confirm that a 1/4 inch board height suits your drawer, verify whether trimming is needed, and confirm compatibility with the wood pegs or chrome accessories you plan to use.

Use gray drawer peg board with confidence

Match vinyl peg board to drawer storage

Buyers usually choose a vinyl peg board when they need a drawer base that can be adapted to the items stored inside the drawer. In a kitchen project, that often means keeping stacks of plates, serving pieces, or cookware from shifting every time the drawer opens. A gray drawer peg board like this one gives the installer a flat base with a sound dampening vinyl covering, which can help reduce contact noise while also making the surface easier to maintain.

This product is part of the Rev-A-Shelf 4DPBG Series and is sold as a single board. The listed size of 30-1/4 inches by 21-1/4 inches makes it a practical option for buyers who already know their drawer interior can accept that footprint or can be trimmed from it. Because the product data states that the board is cut to size to fit any cabinet size, it fits projects where standard dimensions do not match the exact drawer interior. That matters in remodeling work, replacement jobs, and custom cabinetry where drawer boxes can vary.

Compatibility is another common buying concern. This Rev-A-Shelf drawer peg board works with either wood pegs or chrome accessories sold separately. That matters if you are replacing an older board, planning a new drawer insert layout, or trying to match existing components in the shop. Buyers searching revashelf, RS4DPBG-3021-1, or even related references such as RSDPS-PEG-4SS are often trying to confirm whether the board can support a specific organization method. The verified answer is that this board works with wood pegs and with the newer chrome accessories, but the accessories themselves are separate items.

If your project requires a precise fit, measure the actual inside drawer base carefully before ordering. Also confirm whether the drawer sides, slides, or hardware create any obstructions that affect usable width or depth. If you need pegs, accessory rails, or other layout parts, make sure those components are ordered separately when required.

Compare drawer inserts for easier planning

When buyers compare drawer inserts, the main differences usually come down to material, finish, adjustability, and what is included in the package. This Rev-A-Shelf drawer insert is clearly defined as a vinyl peg board with no pegs included. That is useful for buyers who already have compatible pegs or who want to choose wood pegs or chrome accessories separately based on the final drawer layout.

Another planning point is maintenance. The verified product description states that the board has an easy-to-maintain vinyl covering. For buyers outfitting active kitchen drawers, that can be an important distinction compared with unfinished or harder-to-clean surfaces. The sound dampening covering also supports installations where reducing drawer noise is part of the goal.

Flexibility is a major reason to choose this product type. A cut-to-size drawer peg board can be adapted to cabinet interiors rather than forcing the buyer to accept a fixed insert footprint. That is especially useful in trade work where drawer dimensions may differ slightly from plan to plan. The fact that accessories are interchangeable with wood or vinyl peg boards also supports consistency if a project uses more than one compatible insert style.

For careful planning, buyers should focus on what is verified: the board dimensions, gray vinyl finish, cut-to-size capability, compatibility with wood pegs and chrome accessories, and the fact that it is sold each without pegs. Any questions about trimming method, accessory count, weight handling, or long-term performance should be confirmed through manufacturer documentation before installation.

Ask fit questions about drawer inserts

Order rev a shelf with clarity

rev a shelf buyers usually want a drawer insert they can size correctly and configure for the drawer's contents. This Rev-A-Shelf drawer peg board includes one gray vinyl board and does not include pegs or chrome accessories. Before purchase, confirm the inside drawer dimensions, planned trimming, and whether you will use wood pegs or separate accessory components. Matching the board size, included parts, and accessory plan up front helps avoid rework during cabinet installation.