Rev-A-Shelf 4DPS Series 39-1/4"Wx21-1/4"Dx6-5/8"H Walnut Drawer Peg Board, -4DPS-WN-3921

Choose a drawer peg board

Rev-A-Shelf walnut drawer peg board is a drawer insert designed to organize items inside an existing drawer with a drop-in format that can be trimmed to fit. This Rev-A-Shelf drawer insert includes one pre-drilled walnut peg board and sixteen push-in walnut pegs. The drawer peg system is endlessly changeable, so you can adjust the peg layout for different items as storage needs change. The walnut peg board with pegs is made from walnut with a UV-cured finish, and the matching pegs are 6-1/2 inches tall. As a drop in drawer organizer, it is intended for buyers who want a kitchen drawer organizer that can be adapted over time without replacing the whole drawer.

Use Rev-A-Shelf drawer insert advantages

• Drop-in installation - The Rev-A-Shelf drawer insert is made for placement into an existing drawer, which helps simplify setup for cabinet upgrades or retrofit work.
• Trim-to-fit design - This drawer peg board can be adjusted to fit an existing drawer, helping reduce guesswork when working with non-standard interior sizes.
• Pre-drilled walnut peg board - The pre-drilled layout makes peg placement flexible, so the drawer peg system can be rearranged as storage needs change.
• Includes sixteen push-in walnut pegs - The included pegs let buyers start organizing immediately without sourcing matching components separately.
• Walnut construction with UV-cured finish - The walnut drawer insert offers a finished wood appearance suited to cabinet interiors and repeated everyday use.
• Matching walnut pegs - The pegs are made from matching walnut, which keeps the organizer visually consistent across the drawer.
• Pegs are 6-1/2 inches tall - The peg height helps create separation for dishes, containers, or other drawer-stored items that need upright support.
• Endlessly changeable pegboard system - The Rev-A-Shelf drawer insert can be reconfigured for different item sizes instead of locking the user into one layout.
• Additional pegs available separately - Buyers who need a denser layout can expand the walnut peg board with pegs by adding more pegs as an accessory.

Confirm walnut drawer insert details

Key specs to confirm: This walnut drawer insert is listed at 39-1/4 inches wide, 21-1/4 inches deep, and 6-5/8 inches high. The pegs are 6-1/2 inches tall. Because this is a trim to fit drawer insert with drop-in installation, confirm your actual inside drawer width, depth, and side height before ordering. Buyers should also confirm how much trimming is needed for the existing drawer and whether the stored items need the full peg height for support. Load rating, safety data, and any compliance details are not provided here and should be confirmed with the manufacturer or technical documentation if required for the project.

What's included: One pre-drilled walnut peg board and sixteen push-in walnut pegs are included. Additional pegs are available as a separate accessory.

What to verify before ordering: Check the inside drawer opening, usable drawer bottom area, trimming requirements, and whether the drawer is being used for dishes, containers, or other items that fit within a peg layout. Confirm that a walnut drawer insert matches the cabinet finish and that the included sixteen pegs are enough for your planned arrangement.

Match drawer peg system to storage

Use drawer peg system for dishes

A drawer peg board is often chosen when a buyer wants more control than a fixed tray insert can offer. In a kitchen drawer organizer setup, that usually means storing plates, bowls, lids, or serving pieces that vary in diameter and shape. The Rev-A-Shelf walnut drawer peg board is built around that need for adjustment. The pre-drilled board and push-in pegs let the installer place supports where they are needed, then move them later if the drawer contents change.

This matters in real projects because existing drawers rarely serve just one purpose forever. A homeowner may first use the drawer for dinner plates, then later switch to food storage containers or small prep items. A drawer peg system helps avoid that locked-in layout. The pegs can be repositioned, and additional pegs are available separately if a tighter arrangement is needed. For installers, the drop in drawer organizer format also helps when updating an existing cabinet without rebuilding the drawer box.

The trim to fit drawer insert design is another practical point. If the drawer interior does not match the listed dimensions exactly, the buyer can size the insert to the drawer rather than search for a custom board first. That said, trimming needs to be confirmed before ordering. Measure the usable inside width and depth of the drawer, and check for hardware, corner construction, or drawer side profiles that could affect how the walnut drawer insert sits flat.

Material can matter too. This Rev-A-Shelf drawer insert is made from walnut with a UV-cured finish, and the pegs are matching walnut. Buyers who care about a wood interior appearance may prefer that over plastic organizers. If the drawer will hold heavy or unusually shaped items, confirm the item size and spacing needed, since only the listed dimensions, included parts, and peg height are verified here.

Compare walnut drawer insert options

When comparing a walnut drawer insert to other organizer styles, the main difference is adjustability. Fixed dividers work well when every item is the same size, but they can be limiting when drawer contents change. A drawer peg board gives the buyer a layout that can be revised without replacing the insert. That can be useful in kitchens, bath storage areas, or any cabinet drawer where item spacing matters.

Another point to compare is installation style. This product is a drop-in drawer organizer, so it is intended for placement into an existing drawer rather than a built-in factory insert. For many buyers, that reduces installation complexity. The trim-to-fit format also supports retrofit work, but exact fit still depends on careful measuring of the drawer interior before purchase.

Material consistency is also part of the decision. This walnut peg board with pegs uses walnut for both the board and the pegs, with a UV-cured finish on the board. Buyers looking for a wood drawer insert may prefer that coordinated construction. Included contents are straightforward as well: one pre-drilled board and sixteen push-in pegs. If a project needs more peg positions, additional pegs are sold separately, which gives the buyer room to expand the layout over time.

For buyers comparing organizer types, the practical question is not which style is universally better. The better choice depends on the drawer interior, the items being stored, and whether future reconfiguration matters. In that context, a Rev-A-Shelf drawer insert gives a clear fit for users who want a wood organizer with changeable peg placement and a drop-in, trim-to-fit format.

Ask fit questions before install

Order RS4DPS-WN-3921 with confidence

RS4DPS-WN-3921 is a Rev-A-Shelf drawer insert built for buyers who need a walnut drawer peg board with flexible storage layout. You get one pre-drilled walnut board and sixteen matching push-in pegs in a drop-in, trim-to-fit format. Before purchase, confirm your inside drawer dimensions, trimming needs, and whether the 6-1/2 inch peg height fits the items you plan to store. If your layout needs more spacing points, remember that extra pegs are available separately.