Choose Rev-A-Shelf stainless steel pegs
Rev-A-Shelf stainless steel pegs are replacement drawer insert pegs designed for use with compatible Rev-A-Shelf peg board systems. This product is a set of four pegs from Rev-A-Shelf Corporation, made for the brand's 4DPS or 4DPBG peg boards. These peg board pegs help buyers maintain or refresh a kitchen drawer peg system without replacing the full board. The verified product dimensions list each peg at 1-1/4 inches wide, 1-1/4 inches deep, and 6 inches high. For buyers searching for replacement pegs for 4DPS or replacement pegs for 4DPBG, this pack is sold as pegs only. That makes it a practical match when your existing Rev-A-Shelf drawer inserts already use one of the compatible peg boards.
Use drawer insert pegs for order
- Rev-A-Shelf brand compatibility - Built for Rev-A-Shelf 4DPS and 4DPBG peg boards, which helps buyers replace missing or worn pegs within an existing drawer setup.
- Stainless steel construction - Stainless steel drawer pegs provide a metal peg option for buyers who want a material match called out in the verified product data.
- Set of four pegs - A four-pack gives buyers a defined quantity for partial replacement or layout updates on a compatible peg board.
- Pegs only package - The package includes pegs only, which helps buyers avoid assuming a board or full drawer insert is included.
- Designed for peg board systems - These drawer insert pegs are intended for peg board organization layouts rather than loose placement in a drawer.
- Fits Rev-A-Shelf 4DPS peg boards - Buyers with a 4DPS setup can use this product as a targeted replacement part instead of changing the full organizer.
- Fits Rev-A-Shelf 4DPBG peg boards - Buyers using a 4DPBG board can confirm brand-system compatibility before ordering replacement pegs.
- 1-1/4 inch width and depth, 6 inch height - The listed dimensions give installers key size points to compare with drawer depth, stored items, and existing peg spacing.
Confirm peg board pegs fit and contents
Key specs to confirm: These peg board pegs are verified as Rev-A-Shelf stainless steel pegs sized at 1-1/4 inches wide, 1-1/4 inches deep, and 6 inches high. They are designed for Rev-A-Shelf 4DPS or 4DPBG peg boards. Before buying, confirm that your drawer organizer is one of those board systems and that the peg height works with the items you plan to secure in the drawer. Also confirm the board hole pattern and your available drawer clearance. Load details, safety ratings, compliance information, and any installation hardware details are not provided in the verified data and should be confirmed with the manufacturer or technical documentation.
What's included: One pack of four pegs only. The verified description states the product is sold as pegs only and packed as shown.
What to verify before ordering: Check that you have a Rev-A-Shelf 4DPS or 4DPBG peg board, not a different drawer insert. Confirm the quantity of pegs you need, compare the 6 inch height to your drawer interior and stored cookware or dishes, and make sure you are ordering replacement pegs rather than a complete board kit.
Compare stainless steel drawer pegs with confidence
Match replacement pegs for drawer layouts
Buyers usually shop for drawer insert pegs when an existing drawer organizer is missing parts, when the original layout needs to be adjusted, or when a few pegs have been damaged over time. In those cases, replacing only the pegs can be more direct than changing the entire insert. Rev-A-Shelf peg board pegs are intended for that type of maintenance purchase because the verified product data clearly identifies them as pegs only and names the compatible board families.
A common use case is a kitchen drawer peg system that stores plates, bowls, lids, or other items that need separation inside a wide base drawer. If the board is already installed and the buyer only needs more dividers or replacement pieces, a set of four replacement pegs for 4DPS or replacement pegs for 4DPBG can help restore the layout. The stainless steel material is also a clear buying point for customers trying to match an existing metal peg setup from the same brand.
Another scenario involves a cabinet shop, installer, or serious DIY buyer finishing a project and finding that the final drawer layout needs a different peg count. Because these are cabinet drawer peg inserts for specific Rev-A-Shelf boards, the main task is not guessing at universal fit. The main task is confirming that the drawer uses the 4DPS or 4DPBG board system listed in the verified description. Buyers should also compare the listed 1-1/4 inch width, 1-1/4 inch depth, and 6 inch height against the drawer interior and the items being stored.
If your project involves heavy cookware, stacked dishes, or unusually shallow drawers, confirm the board fit and any performance limits in manufacturer documentation before purchase. The verified data does not provide load ratings or installation instructions, so those details should be checked before finalizing a specification for a jobsite or remodel.
Compare peg board pegs for steady fit
When buyers compare peg board pegs, the first question is usually whether they are buying a full insert or only replacement components. This Rev-A-Shelf product is clearly identified as pegs only, which helps prevent ordering mistakes. That matters for trade buyers and homeowners alike because a replacement part needs to match the existing system, not just the general idea of a drawer organizer.
Material is another practical comparison point. These are verified stainless steel drawer pegs, so the product description gives a clear material reference instead of leaving buyers to infer it from a photo. For buyers already using Rev-A-Shelf drawer inserts, that makes it easier to keep a consistent look and part type within the drawer.
Compatibility is the strongest comparison factor here. Rather than presenting these as generic pegs, the verified description ties them to Rev-A-Shelf 4DPS and 4DPBG peg boards. That brand-and-application clarity supports more reliable ordering for replacement work. It also helps installers explain to customers why a specific peg set should be matched to a known board system.
Finally, this pack gives a defined quantity of four pegs. That is useful when planning a small adjustment to an existing layout. If a buyer needs a complete organization system, additional pegs, or a board itself, those items should be sourced separately after confirming the full drawer design and the exact Rev-A-Shelf components already in use.
Check drawer insert pegs before ordering
What does this Rev-A-Shelf product include?
This Rev-A-Shelf product includes four stainless steel pegs only. The verified description does not include a peg board or full drawer insert.
Will these pegs fit any drawer organizer?
These drawer insert pegs are designed for Rev-A-Shelf 4DPS or 4DPBG peg boards. Buyers should confirm they are not ordering for a different board system.
Are these replacement pegs for 4DPS boards?
These pegs are designed for Rev-A-Shelf 4DPS peg boards and also for 4DPBG peg boards, based on the verified product description.
Can I use these replacement pegs for 4DPBG setups?
These replacement pegs are designed for Rev-A-Shelf 4DPBG peg boards. Confirm your existing board model before placing the order.
What size are the pegs?
These Rev-A-Shelf stainless steel pegs are listed at 1-1/4 inches wide, 1-1/4 inches deep, and 6 inches high.
Do these pegs come with installation hardware?
This peg set is verified as pegs only. Any hardware or board components should be confirmed before ordering.
Are these pegs meant for kitchen drawer organization?
These peg board pegs are used with compatible Rev-A-Shelf drawer insert systems, which are commonly applied in kitchen drawers.
What should I verify before ordering replacement pegs?
Buyers should verify the board model, peg quantity needed, drawer clearance, and the listed 6 inch peg height before ordering. Follow manufacturer installation guidance and local building requirements where applicable.
Are load ratings or compliance details listed?
Load ratings and compliance details are not provided in the verified data. Those details should be confirmed with the manufacturer or technical documentation.
Order Rev-A-Shelf peg board pegs correctly
Rev-A-Shelf peg board pegs are a focused replacement part for buyers who already have a compatible Rev-A-Shelf drawer organization board in place. This pack includes four stainless steel pegs only, sized at 1-1/4 inches wide, 1-1/4 inches deep, and 6 inches high. Before purchase, confirm that your board is a 4DPS or 4DPBG model, verify the peg count you need, and compare the peg height with your drawer interior and stored items to avoid ordering the wrong component.
