Rev-A-Shelf 4DPS Series 30-1/4"Wx21-1/4"Dx6-5/8"H Walnut Drawer Peg Board, -4DPS-WN-3021

Choose a drawer peg board

Rev-A-Shelf walnut drawer peg board is a drawer insert made for custom organization inside an existing drawer. This Rev-A-Shelf drawer insert uses a pre-drilled walnut board and push-in walnut pegs so you can arrange storage around the items you use most. The board is designed for drop-in drawer peg board installation and can be used as a trim-to-fit drawer insert for existing drawers. The verified size is 30-1/4 inches wide, 21-1/4 inches deep, and 6-5/8 inches high. The included drawer peg kit comes with one walnut peg board and twelve matching walnut pegs. The endlessly changeable peg layout helps create a walnut peg board organizer for cookware, dishes, and other drawer contents that need flexible spacing.

Use Rev-A-Shelf drawer insert advantages

• Rev-A-Shelf 4DPS Series drawer insert - gives buyers a dedicated drawer organization format built for adjustable peg placement.
• 30-1/4 inch W x 21-1/4 inch D x 6-5/8 inch H size - helps you compare the insert against your drawer interior before ordering.
• Drop-in installation - allows faster placement in an existing drawer without building a new organizer from scratch.
• Trim-to-fit existing drawer design - helps installers adapt the board to the drawer space when needed.
• Pre-drilled walnut peg board - makes peg placement simple and supports layout changes over time.
• Includes 12 push-in walnut pegs - provides a ready-to-use starting set for organizing dishes or other stored items.
• Endlessly changeable pegboard system - lets users reconfigure spacing for different item sizes as storage needs change.
• UV-cured walnut board construction - gives the drawer peg board a finished walnut surface from the manufacturer.
• Matching walnut pegs at 6-1/2 inches tall - helps keep the appearance consistent while creating vertical separation inside the drawer.
• Additional pegs available as an accessory - gives buyers a path to expand the layout if the standard set is not enough.

Confirm drawer peg board specs

Key specs to confirm: This drawer peg board is listed at 30-1/4 inches wide, 21-1/4 inches deep, and 6-5/8 inches high. Buyers should confirm the inside drawer dimensions, drawer side height, and any hardware or obstructions that could affect fit before trimming or dropping the board into place. Because this is a trim-to-fit drawer insert for an existing drawer, measure the usable interior space rather than the cabinet opening alone. If you need load, safety, compliance, or other technical performance details, those are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: One pre-drilled walnut peg board and twelve push-in walnut pegs are included. The pegs are matching walnut and are 6-1/2 inches tall. Additional pegs are available as a separate accessory.

What to verify before ordering: Confirm your drawer's interior width and depth, check whether trimming is required, verify that 6-1/2 inch pegs work with the items you want to store, and make sure the drawer height and clearance support the planned layout.

Compare drawer peg board fit

Use drawer peg board for storage

A drawer peg board works well when a standard flat drawer becomes messy because stored items slide, tip, or mix together. A professional installer may use this type of organizer in a kitchen where dishes, serving pieces, or other frequently used items need defined spacing. A serious DIY buyer may choose a walnut drawer insert when they want a cleaner layout without building a custom divider system from raw stock.

This Rev-A-Shelf walnut drawer peg board is useful because the board is pre-drilled and the pegs push in where needed. That gives the user a way to change the layout over time instead of committing to fixed compartments. If the drawer contents change seasonally or by project, the peg pattern can be adjusted. The included drawer peg kit gives you a starting set of twelve pegs, and additional pegs are available if the arrangement needs more support points.

The drop-in drawer peg board format also fits buyers who want a simpler install path. Instead of fabricating a new insert, the board is made for drop-in installation and is described as trim-to-fit for an existing drawer. That matters when drawer interiors vary slightly or when a buyer wants to adapt the insert to a specific drawer box. Before ordering, confirm the actual usable drawer interior and consider whether the 30-1/4 inch by 21-1/4 inch board size matches your project. Also confirm that the 6-1/2 inch peg height and the listed overall height work with the drawer and the items being stored.

For many storage projects, a walnut peg board organizer offers a balance between appearance and adjustability. The board is constructed from UV-cured walnut, and the pegs are made from matching walnut. That makes this Rev-A-Shelf drawer insert a practical choice for drawers where visible organization matters as much as flexible spacing.

Compare walnut drawer insert options

When buyers compare drawer organization products, one key difference is whether the insert is fixed or adjustable. A fixed tray may work for one set of items, but a drawer peg board can be rearranged as needs change. That makes this product type useful for drawers that hold different sizes of dishes or other household items over time.

Another difference is installation method. Some organizers require more involved construction or permanent mounting. This walnut drawer insert is described as drop-in and trim-to-fit, which supports a more direct installation path in an existing drawer. Buyers still need to measure carefully, but the product format is aimed at practical fit and adaptation rather than a one-size-fits-all claim.

Material consistency also matters. This Rev-A-Shelf drawer insert includes a walnut board with matching walnut pegs, and the board is UV-cured. For buyers who want a coordinated wood organizer instead of mixed materials, that is a clear product detail to compare. The included twelve pegs are enough to start planning the layout immediately, while optional extra pegs support future changes.

In short, the value of this product type comes from adjustable organization, verified dimensions, and a straightforward included set. The strongest buying decision usually comes down to fit inside the drawer, the height needed for the stored items, and whether the included peg count matches the intended layout.

Ask drawer insert fit questions

Order the walnut drawer insert

RS4DPS-WN-3021 is a practical choice when you need a drawer peg board with verified dimensions, a drop-in format, and included walnut pegs. This Rev-A-Shelf drawer insert includes one pre-drilled walnut board and twelve 6-1/2 inch pegs, with extra pegs available separately. Before purchase, confirm your drawer's usable interior size, whether trimming is required, and whether the peg height matches the items you plan to store. Careful measuring helps this walnut drawer insert perform as intended in an existing drawer.

Select RS4DPS-WN-3021 with confidence