Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Mulholland pull 128mm center to center is a zinc die-cast cabinet handle finished in gilded bronze, so it provides a defined grip with a warm metallic look that works well on cabinet doors and drawer fronts. The 5-1/16 in (128 mm) center-to-center drilling locates the mounting holes at a common size, which helps when laying out new cabinets or matching an existing drill pattern. Overall length is 5-7/8 in (149 mm), giving enough bar length beyond the screw holes for a full hand grasp on doors and wider drawers. A projection of 1-1/4 in (32 mm) stands the pull off the front face, which creates usable finger clearance without reaching too far into the room. Width of 7/8 in (22 mm) offers a stable contact surface for the hand, adding control when opening heavier fronts.
The 5-1/16 in (128 mm) center-to-center size sets the hole spacing for this Amerock Mulholland cabinet handle, which is useful when aligning with standard metric drilling patterns on modern cabinetry. With an overall length of 5-7/8 in (149 mm), the pull extends slightly beyond the mounting centers at both ends, giving a proportioned look on medium-width drawers and doors. The 1-1/4 in (32 mm) projection defines how far the grip stands off the face, providing working clearance for fingers while keeping the handle tight enough to the cabinet line for narrow walkways. A 7/8 in (22 mm) width across the bar affects how the pull feels in the hand, giving a broad edge to pull against when operating heavier or taller fronts.
The Amerock Mulholland gilded bronze pull uses a finish that pairs with other bronze hardware elements, so it fits projects where a consistent warm metallic tone is needed across a kitchen, bath, or built-in. Its 5-1/16 in (128 mm) center-to-center size suits cabinet fronts that are planned around common drilling patterns, which helps when laying out new casework using standard boring equipment. The 5-7/8 in (149 mm) overall length gives the handle presence on typical wall and base cabinet doors, allowing it to sit proportionally on stiles without crowding the edges. With a projection of 1-1/4 in (32 mm), the pull provides enough stand-off for fingers on deeper drawer boxes while still sitting close enough to the face to align visually with nearby hardware on adjacent fronts.
The zinc die-cast material of the Mulholland cabinet pull creates a uniform casting, which helps each piece match in shape and feel across a run of cabinets. A width of 7/8 in (22 mm) across the grip creates a defined edge, giving the hand a predictable surface to pull against on frequently used drawers. Base dimensions of 13/16 in (21 mm) in both length and width at each mounting point create a stable footprint, so the handle seats evenly on flat faces and covers the drilled holes cleanly. The specified 5-1/16 in (128 mm) center-to-center measurement allows installers to rely on a single jig setting, which reduces layout time and keeps all pulls aligned across upper and lower cabinets. The gilded bronze finish ties each handle visually to similar-toned hardware, helping the whole installation read as one coordinated system.
The Amerock Mulholland pull has a 5-1/16 in (128 mm) center-to-center size, which sets the drilling distance between mounting holes and matches common cabinet boring patterns.
The Amerock Mulholland cabinet pull is 5-7/8 in (149 mm) long, giving extra handle length beyond the mounting centers for a comfortable hand grip on doors and drawers.
The Mulholland BP53529GB pull is made from zinc die-cast material, which provides a solid, uniform body and allows precise shaping at the ends where it meets the cabinet surface.
This Amerock Mulholland pull has a gilded bronze finish, so it coordinates with other bronze-toned decorative hardware throughout the same project.
The Mulholland pull projects 1-1/4 in (32 mm) from the cabinet face, creating finger clearance while keeping the handle close to the door or drawer front.
Each end of the pull has a base length and width of 13/16 in (21 mm), giving a stable footprint that covers the mounting holes against the cabinet surface.
The Amerock Mulholland Series 5-1/16 in (128 mm) center-to-center gilded bronze pull BP53529GB combines a known drilling size with defined dimensions, so it supports consistent layouts across doors and drawers. With zinc die-cast construction and a coordinated gilded bronze finish, it suits projects that need matching hardware along full cabinet runs. For cabinet work that calls for a 128 mm center-to-center handle in this finish and size range, this pull offers a unified option to carry through the job.
Sold In: 1 Each
