Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Dierdra Series knob identifies this piece as part of the Dierdra collection from Berenson Corporation, so installers can match it with other Dierdra decorative hardware on a job. The knob is a zinc die cast design in a polished nickel finish, giving cabinets a bright metal look that pairs well with many hinge and pull finishes. Its diameter of 1-7/16 inches defines the hand contact area, giving fingers a clear grip point on doors or drawers. A width of 1 inch helps the knob sit neatly on narrower face frames or drawer fronts, supporting layouts where space between pulls is tight. A projection of 1-3/16 inches stands the knob off the surface far enough for a comfortable grasp, which helps users open doors even when front edges or adjacent hardware are close by.
The Berenson Dierdra knob uses a screw size of 8-32 x 1 inch, which matches a common cabinet hardware thread and length for many door and drawer fronts. This standardization helps installers move quickly from knob to knob without changing drivers or fastener style. The knob projection of 1-3/16 inches keeps the hand contact zone away from the surface, which can reduce finger contact with painted or stained finishes during use. A base diameter of 9/16 inch defines the footprint that bears against the door or drawer face, giving a clear reference point when aligning the knob over a drilled hole. With a 1-7/16 inch diameter and 1 inch width, the knob geometry works well with typical 3/4 inch fronts, supporting centered mounting that looks balanced in finished cabinetry.
The Dierdra series zinc die cast knob with a 1-7/16 inch diameter is suited to cabinet doors and drawers where a defined grip point is needed across multiple openings. Its 1 inch width lets it sit comfortably on standard stile and rail constructions, which is important on doors with narrow frames. The 1-3/16 inch projection gives fingers space behind the knob, which helps when opening heavier drawers or doors that seal tightly. With a polished nickel finish, the knob visually matches other polished nickel elements in kitchens, baths, and built-ins, allowing a consistent finish across all cabinet hardware positions. The base diameter of 9/16 inch creates a modest contact circle on the surface, so the knob looks proportional on both small vanity doors and wider kitchen cabinets.
The specified 8-32 x 1 inch screw size gives a predictable fastening point for the Berenson Dierdra Series knob, so drilling patterns can be repeated across a run of cabinets without adjustment between openings. The zinc die cast construction keeps knob dimensions consistent from piece to piece, which supports straight visual lines when multiple knobs are installed along a bank of doors. The 1-7/16 inch diameter and 1 inch width provide fixed reference dimensions, helping installers center the knob relative to door edges or drawer rails for uniform reveals. A projection of 1-3/16 inches establishes a reliable stand-off from the cabinet surface, keeping user hand clearance the same on every opening. The polished nickel finish maintains one consistent color tone across each knob, which supports clean alignment with other Dierdra components using the same finish.
The Berenson Dierdra Series knob has a diameter of 1-7/16 inches, a width of 1 inch, a projection of 1-3/16 inches, and a base diameter of 9/16 inch, defining its footprint and hand clearance.
The Berenson 4110-1014-P knob is made from zinc die cast, providing a solid metal construction that keeps dimensions and feel consistent across multiple installed knobs.
This Dierdra knob has a polished nickel finish, giving a bright metallic appearance that coordinates with other polished nickel decorative hardware on cabinets.
The Dierdra knob projects 1-3/16 inches from the cabinet surface, creating finger clearance that supports a comfortable grip on doors and drawers.
The Berenson Dierdra Series knob is specified for an 8-32 x 1 inch screw, matching a common cabinet hardware thread and length for typical door and drawer fronts.
This cabinet knob is from Berenson Corporation and is part of the Dierdra collection, allowing visual coordination with other Dierdra decorative hardware pieces.
The zinc die cast construction, 1-7/16 inch diameter, and 1-3/16 inch projection give the Berenson Dierdra Series knob defined performance characteristics for cabinet doors and drawers. Its polished nickel finish aligns with many current hardware and fixture selections, while the 1 inch width and 9/16 inch base diameter support balanced placement on standard fronts. With the specified 8-32 x 1 inch screw size, this knob fits smoothly into common cabinet hardware layouts. Choose this model when a polished nickel Berenson decorative knob with known, repeatable dimensions is needed across a project.
Sold In: 1 Each
