Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dierdra pull 224mm center to center gives cabinets an 8-13/16 inch handle spacing that matches common drilling setups, which helps installers lay out consistent lines across doors and drawers. The Berenson Dierdra Series design builds on this 224 mm center to center dimension to provide a longer gripping area, which supports comfortable opening on wider fronts. Brushed nickel finish on this pull creates a muted metallic look that works with many hinge and fixture finishes, so jobs maintain a coordinated appearance. Zinc construction provides a solid-feeling pull body, which supports everyday cabinet use in kitchens, baths, or shop-built furniture. The 9-1/2 inch overall length extends beyond the mounting points, giving fingers more leverage at the ends of the handle. A 1-3/8 inch projection sets the pull off the face of the cabinet, which creates clearance for fingers without crowding adjacent doors.
The 224 mm center to center mounting on this Berenson Dierdra pull defines the distance between the two fastener points, which guides hole drilling on doors and drawers. Because that translates to 8-13/16 inches, installers working in imperial units can lay out bores quickly using tape measures or jigs set to that measurement. The 9-1/2 inch overall length extends slightly past those holes on both sides, which balances the pull visually on wider fronts. A 5/8 inch width across the face of the handle keeps the pull from overpowering narrow rails, which is helpful on smaller cabinet doors. With a 1-3/8 inch projection, the handle stands off from the surface far enough for a comfortable wrap grip, which supports easy operation for most users.
This Berenson Dierdra Series pull, with its 224 mm (8-13/16 inch) center to center dimension, fits cabinet layouts that call for a longer handle span, such as wide drawers and tall pantry doors. The 9-1/2 inch overall length helps the pull look proportional on these larger fronts, which keeps the hardware from appearing undersized. Because the pull is 5/8 inch wide, it also works on narrower stiles where a very bulky handle might crowd the frame, giving flexibility across a full run of cabinets. The 1-3/8 inch projection keeps hands away from door faces during use, which helps protect finished surfaces from fingerprints during everyday operation. With zinc as the base material and a brushed nickel finish, this pull suits projects aimed at a contemporary or transitional metal look, tying into other brushed nickel hardware used elsewhere in the space.
The clearly defined 224 mm center to center measurement on this Dierdra pull lets installers set drilling jigs or boring equipment once, which supports consistent hole placement from cabinet to cabinet. Because that distance equals 8-13/16 inches, crews working from imperial plans can transfer measurements directly, which reduces layout conversions on site. The 9-1/2 inch overall length tells installers how much space the pull will occupy across a rail or drawer front, which aids in checking edge clearances between adjacent cabinets. A 5/8 inch width means the pull will sit comfortably on typical face-frame or frameless door rails without overhang, which helps maintain clean lines along a run. The 1-3/8 inch projection sets the handle out enough that fingers can tuck behind the pull even on thicker door profiles, supporting smooth operation on fully loaded drawers or heavier cabinet doors.
The Dierdra pull has a 224 mm center to center dimension, or 8-13/16 inches, which sets the spacing between mounting holes for cabinet doors and drawers.
The Berenson Dierdra pull measures 9-1/2 inches in overall length, which helps it suit wider drawers and taller doors visually and functionally.
This cabinet handle has a 1-3/8 inch projection, providing finger clearance between the pull and the cabinet surface during everyday use.
The face of this cabinet pull is 5/8 inch wide, giving a slim profile that still offers enough edge for a comfortable grip on doors and drawers.
This cabinet pull is made from zinc with a brushed nickel finish, creating a solid pull body with a soft metallic appearance on cabinetry.
The 9564-1BPN-P designation is the Berenson manufacturer part number for this Dierdra Series brushed nickel cabinet pull, helping identify it for ordering and matching.
The Berenson Dierdra Series 224 mm center to center brushed nickel pull pairs a defined 8-13/16 inch mounting spread with a 9-1/2 inch overall length, which suits wider doors and drawers. Zinc construction with a brushed nickel finish provides a solid-feeling handle and a coordinated metal look across a project. With 5/8 inch width and 1-3/8 inch projection, this pull offers a slim profile and usable hand clearance that work across many cabinet layouts. For cabinet runs needing a longer brushed nickel handle with these exact dimensions, this Dierdra pull is positioned to fit that specification.
Sold In: 1 Each
