Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Dierdra cabinet pull is a zinc die cast handle in the Dierdra collection, so it delivers a consistent style across cabinetry runs where this series is specified. The polished nickel finish provides a bright, reflective surface, which gives cabinets a crisp look when light hits the hardware. The pull measures 4-1/2 inches in overall length, which covers most standard drill patterns without overwhelming narrower drawer fronts. Its 3-3/4 inch (96 mm) center to center dimension matches a common boring size, simplifying layout for new work or swaps where this spacing is already drilled. A projection of 1-5/16 inches sets the grip out from the cabinet face, creating finger clearance that makes doors and drawers easier to open. The 5/8 inch width provides a proportional, comfortable grasp that balances visual presence with everyday handling.
The Berenson Dierdra cabinet pull uses a 3-3/4 inch (96 mm) center to center dimension, so hole drilling aligns with common cabinet hardware templates. The 8-32 screw size matches a standard cabinet pull thread, which fits typical pre-tapped or through-bored door and drawer applications. With an overall length of 4-1/2 inches, the pull extends beyond the mounting holes, helping to bridge stiles or rail details while keeping the bore points within solid material. A 1-5/16 inch projection establishes consistent standoff, which influences how far the hand is positioned away from the cabinet face during use. The 3/8 inch base dimensions at each end define the contact patch, which affects how the pull nests against flat faces and narrow framing members.
The 96 mm center to center spacing on this Dierdra series pull aligns with a widely adopted metric standard, which suits many cabinet layouts in shops that build using that boring pattern. Its 4-1/2 inch overall length pairs well with both doors and medium-width drawers, so a single model can often serve across multiple cabinet positions. The 5/8 inch width keeps the pull visually appropriate on face-frame and frameless fronts, allowing it to sit within narrow rails without crowding edges. A polished nickel finish gives a reflective, metal look that coordinates with other polished nickel hardware, supporting a unified appearance where that finish is specified. Zinc die cast construction provides a solid-feeling body, which gives the pull a substantial hand feel during regular cabinet operation.
The 3-3/4 inch (96 mm) center to center measurement on this 4107-1014-P pull provides a fixed reference, which helps installers maintain straight, repeatable hardware lines across banks of doors and drawers. The 1-5/16 inch projection keeps the grip depth uniform from piece to piece, so users experience the same reach and clearance on every front equipped with this pull. With bases sized at 3/8 inch, the contact points remain predictable, simplifying layout when aligning the hardware relative to panel edges or rail reveals. The 5/8 inch width produces a consistent bar thickness, so visually, all pulls in a run share the same profile whether mounted vertically on doors or horizontally on drawers. The polished nickel finish reflects light similarly across pieces in the Dierdra collection, which supports a cohesive look when this pull is repeated throughout a project.
The Berenson Dierdra cabinet pull has a 3-3/4 inch, or 96 mm, center to center measurement, which matches common drilling patterns for doors and drawers.
The pull length is 4-1/2 inches, so it extends beyond the mounting holes and works well on standard cabinet doors and many drawer fronts.
The 4107-1014-P pull is zinc die cast, giving it a solid metal construction that supports everyday cabinet use.
This polished nickel cabinet pull has a projection of 1-5/16 inches, creating finger clearance between the grip and the cabinet face.
The pull width is 5/8 inch, providing a comfortable bar thickness for opening doors and drawers without taking up excessive front space.
This Dierdra series pull uses 8-32 screw threads, matching a standard size commonly used for cabinet pulls.
The Berenson Dierdra cabinet pull pairs a 3-3/4 inch (96 mm) center to center layout with a 4-1/2 inch length, giving a familiar footprint for cabinet projects using that spacing. Its zinc die cast construction and polished nickel finish provide a metal pull that visually aligns with polished nickel hardware schemes. With a 1-5/16 inch projection, 5/8 inch width, and 3/8 inch base dimensions, the pull offers defined geometry that supports consistent alignment across doors and drawers. For work calling for a Dierdra collection look at 96 mm centers, this 4107-1014-P model fits that role.
Sold In: 1 Each
