Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dierdra pull 224mm center to center identifies this Berenson Corporation handle as an 8-13/16 inch center to center pull, which lets installers line up drill points on cabinet doors and drawers for consistent handle spacing across a run. The 9-1/2 inch length or diameter dimension shows the overall handle length, so layout on wider drawer fronts or tall doors can be planned with clear margins from panel edges. The 1-3/8 inch projection defines how far the pull stands off the surface, giving fingers room to grip while keeping the profile tight enough for most cabinet door swings. A 5/8 inch width gives a slim front view that still offers a defined edge to grab, which is useful on frequently used doors. The Dierdra collection name ties this pull to the broader Berenson Dierdra Series, supporting visual continuity on multi-room projects.
The 8-13/16 inch center to center measurement is the key drilling reference for this handle, so installers can set jig stops or measurements to that span and repeat the layout across multiple doors and drawers. With a 9-1/2 inch overall length, the pull extends slightly past the screw holes at each end, which affects how close it can sit to stile edges or neighboring fronts on narrow cabinets. The 1-3/8 inch projection creates clearance between hand and cabinet face, which is important where doors open near adjacent walls or appliances. The 5/8 inch width defines the front profile, influencing how the pull sits visually on narrow rails versus wide drawer fronts. The stated screw size of 8-32 x 1 inch indicates the threaded interface the handle is designed around, which ties directly to standard cabinet door and drawer front thicknesses that accept this screw length.
The category designation as Handles and Pulls, Berenson places this product squarely in decorative cabinet hardware, which suits kitchen, bath, and built-in casework where a finished appearance matters. The Dierdra collection reference ties this pull to other Dierdra pieces, allowing uniform style across doors and drawers in the same space. With a 9-1/2 inch overall length, the pull works well on wider drawer fronts where a longer grip looks proportional to the cabinet face. The 8-13/16 inch center to center dimension aligns with larger cabinetry layouts, giving full-hand access on deep drawers that hold heavier items. The vintage nickel finish can coordinate with other nickel-toned hardware, which helps projects maintain a consistent visual line from pulls to visible hinges or appliance trims.
The zinc material used for this Dierdra pull provides a solid metal base that accepts the vintage nickel finish evenly, which supports a uniform look when multiple pulls are installed side by side. The 1-3/8 inch projection keeps every handle standing off the door or drawer face by the same distance, which gives predictable clearance for fingers across an entire kitchen run. With a 5/8 inch width, the pull presents a narrow but defined contact surface, allowing consistent alignment to rail edges when installers use visual cues instead of jigs. The specific manufacturer part number 9808-1VTN-P helps match replacements later, so any future hardware changes on damaged fronts can retain the same size and finish. The 8-32 x 1 inch screw size specification identifies the thread and length the pull is built around, supporting repeatable fastening into typical cabinet materials that accept this standard hardware.
The Berenson Dierdra pull has an 8-13/16 inch, or 224 mm, center to center dimension, which sets the hole spacing and guides drilling layout on cabinet doors and drawers.
The Dierdra series handle has a 9-1/2 inch overall length, so it spans a noticeable width on larger drawers and doors while leaving edge clearance on most standard cabinet fronts.
This vintage nickel cabinet pull projects 1-3/8 inches from the cabinet surface, providing hand clearance while maintaining a relatively low profile on the door or drawer.
The 9808-1VTN-P Dierdra pull is made from zinc, giving it a metal body suited to decorative cabinet hardware applications in kitchens, baths, and built-ins.
This Dierdra series cabinet handle has a vintage nickel finish, helping it coordinate with nickel-toned hinges, faucets, and other visible metal elements in the space.
The Berenson Dierdra pull is specified with 8-32 x 1 inch screws, indicating the thread size and length it is designed to fasten with into cabinet doors and drawers.
The Berenson Dierdra Series 8-13/16 inch center to center vintage nickel pull combines a 224 mm drilling span, 9-1/2 inch overall length, and 1-3/8 inch projection to suit larger cabinet doors and drawers. The zinc construction and vintage nickel finish align with decorative hardware needs where both function and coordinated appearance matter. Using part number 9808-1VTN-P from Wurth Baer Supply keeps specifications consistent across an installation, supporting clean lines and matching hardware throughout the project.
Sold In: 1 Each
