Berenson Dierdra Series 6-5/16" (160 mm) Center to Center Polished Nickel Pull, - 9567-1014-P

Berenson Dierdra Cabinet Pull 160mm For Cabinets

Berenson Dierdra cabinet pull 160mm center to center gives cabinets a defined grip point along its 6-5/16 inch mounting span, which helps doors and drawers open with a consistent hand position across a run of fronts. The Dierdra collection identity ties this pull to a specific Berenson design family, so matching or repeating this profile across a project stays straightforward. Constructed from zinc, the pull body uses a metal base that supports everyday cabinet use in residential or light commercial environments where metal hardware is standard. The polished nickel finish presents a bright, reflective surface, which affects how the pull visually coordinates with hinges, faucets, or other polished nickel details on the job. A projection of 1-1/2 inches sets the hand clearance off the cabinet face, giving fingers space between the 5/8 inch wide grip and the door or drawer front during operation. Overall length of 6-15/16 inches defines the footprint on the facade.

Key Dierdra Pull Details For Project Planning

• The 6-5/16 inch center to center dimension creates a fixed drilling pattern that aligns multiple Berenson Dierdra pulls in straight, repeatable rows across doors and drawer fronts, simplifying layout on larger cabinet runs.
• The 6-15/16 inch overall length defines the visible hardware span, which helps in scaling this pull to rail widths or drawer front sizes so proportions stay balanced across narrow and wider fronts.
• The 1-1/2 inch projection offsets the handle from the cabinet surface, allowing room for fingers to wrap behind the pull during opening while keeping the hardware close enough to reduce snag risk in tight walkways.
• The 5/8 inch width at the grip provides a slim front profile that reads clean on the face of cabinets, yet still offers a defined edge to pull against when operating heavier drawers or tall pantry doors.
• The 8-32 x 1 inch screw size specification identifies the thread standard used with this pull, which matters when matching or reusing tapped holes or when selecting compatible fasteners for different door or drawer thicknesses.

Mounting And Hole Spacing For Berenson Dierdra Pull

The 160 mm, or 6-5/16 inch, center to center measurement dictates the two mounting hole locations for the Berenson Dierdra pull, guiding drilling jigs or templates during cabinet fabrication. When retrofitting, this same center to center span allows the pull to align with existing holes that share this 160 mm pattern, limiting the need to alter door or drawer fronts. The 1-1/2 inch projection and 5/8 inch width together define the three-dimensional envelope off the cabinet face, which is useful when hardware must clear adjacent doors, trim, or appliance panels. Specified screw size of 8-32 x 1 inch identifies the thread engagement length commonly used with standard cabinet door and drawer thicknesses, affecting how the pull fastens through the panel. The polished nickel finish then visually ties this mounting layout into polished nickel hardware themes.

Using The Dierdra Polished Nickel Cabinet Pull

Where The Berenson Dierdra Series Handle Fits

The Berenson Dierdra Series 6-5/16 inch center to center polished nickel pull functions as a handle for cabinet doors and drawers within the decorative hardware and moldings category. Its 160 mm hole spacing places it within a common metric pattern, which supports use on cabinets designed around European-style drilling layouts. At 6-15/16 inches overall length, the pull suits medium-width drawer fronts or larger doors where a longer grip looks proportional to the panel size. The polished nickel finish positions this pull for projects using bright, reflective metal tones across hinges, knobs, and plumbing fixtures, allowing the hardware line to appear visually consistent. A 1-1/2 inch projection and 5/8 inch width work together to create a handle that stands off the surface enough for practical gripping while maintaining a trim face profile across framed or frameless cabinetry.

Details That Support Consistent Hardware Results

The 160 mm center to center specification on the Dierdra polished nickel cabinet pull enables precise repetition of mounting holes, which is important when installers want parallel, level hardware lines across multiple fronts without constant re-measuring. Using the stated 8-32 x 1 inch screw size keeps the fastening method aligned with the pull design, aiding in predictable thread engagement through typical cabinet door and drawer thicknesses. The defined 6-15/16 inch overall length and 5/8 inch width give shop drawings clear edge distances for positioning relative to door stiles or drawer edges, which helps avoid conflicts with panel profiles or glass lites. The 1-1/2 inch projection sets a known clearance behind the pull, supporting smooth hand access when paired with overlay doors or adjacent tall cabinets. Together, these fixed dimensions help installers repeat a clean, uniform look across entire kitchens or built-ins using the Berenson Dierdra pull.

Common Questions About The Berenson Dierdra Pull

Select This Pull For Confirmed Size And Finish

The Berenson Dierdra Series 6-5/16 inch center to center polished nickel pull combines a defined 160 mm hole spacing, zinc construction, and polished nickel finish, giving clear parameters for layout and appearance. The 6-15/16 inch overall length, 1-1/2 inch projection, and 5/8 inch width translate into known clearances and visual scale on cabinet doors and drawers. With the 8-32 x 1 inch screw size specified, this pull slots into standard cabinet construction methods. Use these confirmed details to align this Dierdra polished nickel cabinet pull with your planned drilling pattern and finish palette across the project.