Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Berenson Dierdra weathered nickel pull is a zinc cabinet handle designed for installers who need a defined 6-5/16 inch (160 mm) center to center dimension. That precise drilling size sets consistent hole spacing, which keeps cabinet and drawer layouts aligned across a run. The pull body is zinc, giving a solid metal feel while keeping the part workable for cabinetry projects. Its weathered nickel finish provides a muted metallic look, which helps this handle blend with many door and drawer colors in kitchen, bath, and shop environments. Overall length is 6-15/16 inches, so the pull visually spans more of the front, helping balance wider drawer faces. Projection is 1-1/2 inches, giving fingers room to grab from above or below. Width is 5/8 inch, which keeps the profile slim on doors while still providing a defined gripping surface.
This Dierdra 160mm center to center pull uses a straight-through mounting pattern based on its 6-5/16 inch drilling dimension, which aligns with standard cabinet boring setups. That fixed center to center distance helps templates and jigs line up quickly from one front to the next. The pull projects 1-1/2 inches off the surface, allowing full finger clearance even on thicker doors or drawer fronts. With a 5/8 inch width, it sits neatly on narrow stiles without crowding adjacent components. The overall 6-15/16 inch length provides an extended grip area, useful on wider fronts where users may grab near either end. The zinc material and weathered nickel finish combine into a handle that visually matches other nickel hardware while maintaining a practical working profile.
The 6-5/16 inch center to center on this Berenson zinc cabinet pull matches a widely used spacing in kitchen, bath, and casework layouts, so it suits both new builds and upgrades using that pattern. Its 6-15/16 inch overall length helps when a project calls for a pull that visually suits medium to large doors and drawers, so runs of tall cabinets or wide bases look intentional. The 1-1/2 inch projection allows hands to wrap behind the pull without contact with the door or drawer face, which is useful when fronts are thicker or have applied panels. At 5/8 inch width, the pull sits comfortably on typical rail and stile widths and on slab fronts without overwhelming narrower faces. Combined with the weathered nickel finish, this creates a handle that works well alongside other nickel-toned decorative hardware in the same space.
The defined 160 mm center to center spacing on the Dierdra 9810-10WN-P cabinet pull supports repeatable drilling because installers can set jigs or CNC programs to that single standard and use it across many fronts. That consistency keeps handle lines straight from cabinet to cabinet. The 6-15/16 inch overall length gives more contact area across the face, which helps align sightlines on banks of drawers, particularly when mixing different cabinet widths. With a 1-1/2 inch projection, the pull stands out enough that fingers engage it easily, reducing fumbling on frequently used drawers. The 5/8 inch width means the pull occupies a modest footprint, which is helpful when balancing multiple hardware elements on a door. Zinc construction adds a solid feel in hand, while the weathered nickel finish supports a coordinated look with other nickel cabinet hardware, reducing visual mismatches on completed installations.
This Dierdra pull has a 6-5/16 inch (160 mm) center to center dimension, giving a defined drilling pattern for consistent cabinet and drawer hole spacing.
The 9810-10WN-P pull has a 6-15/16 inch overall length, a 1-1/2 inch projection from the surface, and a 5/8 inch width, shaping its footprint on the cabinet front.
This Berenson Dierdra pull is made from zinc, providing a metal handle body suitable for everyday cabinet and drawer use.
The Dierdra 160mm center to center pull has a weathered nickel finish, giving a softened metallic look that coordinates with nickel-toned hardware.
This weathered nickel pull projects 1-1/2 inches from the surface, creating finger clearance for comfortable door and drawer operation.
The 9810-10WN-P cabinet pull is manufactured by Berenson Corporation, within the Dierdra collection of decorative handles and pulls.
The Berenson Dierdra weathered nickel pull combines a 6-5/16 inch (160 mm) center to center, 6-15/16 inch overall length, 1-1/2 inch projection, and 5/8 inch width in a zinc body. Those dimensions match common cabinet drilling patterns while giving a comfortable grip profile. The weathered nickel finish aligns with other nickel-based decorative hardware, supporting cohesive kitchens, baths, and built-ins. For projects built around a 160 mm drilling standard where a mid-length handle is needed, this Dierdra pull offers a practical fit. Use this part number 9810-10WN-P when the job calls for consistent spacing and a weathered nickel appearance across multiple cabinets.
Sold In: 1 Each
