Festool Rubin 2 5 inch sanding disc is a 150 grit aluminum oxide sanding disc on a paper backing, so it delivers a fine, controlled cut that suits intermediate to finish sanding on wood surfaces. The disc uses a hook and loop backing, which allows quick attachment and removal on compatible sanders, supporting fast abrasive changes between grit steps. A 9-hole pattern is built into the disc, providing dust extraction paths that help keep the sanding surface cleaner during use. Rubin 2 is designed to quickly shed wood fibers, which reduces clogging so the abrasive surface stays open and continues cutting. This shedding behavior helps maintain cutting efficiency across the sanding pass, which is useful when working larger panels. The disc is part of the Rubin 2 system, which is designed for rapid grit progression from 80 to 220, helping streamline surface preparation sequences.
The hook and loop backing on this Festool Rubin 2 5 inch sanding disc interfaces with a matching hook and loop sander pad, so the installer presses the disc onto the pad until it seats across the face. When changing discs, the user pulls the disc away from the pad, and the backing releases so a new disc can be aligned. The 9-hole pattern in the disc aligns with corresponding holes on the sander pad, which allows dust extraction through the pad during sanding. This matching pattern supports consistent dust removal zones across the disc face, helping maintain contact between the abrasive and the wood surface.
This Festool Rubin 2 5 inch sanding disc is designed for use on hardwoods like oak or maple, so it fits cabinet doors, face frames, and solid wood components made from these species. It is also designed for soft woods like pine or fir, which matches common trim, carcass parts, and construction-grade stock. The disc is suitable for tropical woods like ebony or teak, so it addresses denser species frequently used in specialty furniture or accent work. It is additionally designed for wood-based products, which covers sheet goods such as certain panel materials in woodworking environments. The 150 grit level fits into sanding sequences between coarser and finer Rubin 2 grits, consolidating the progression toward a finished surface.
Rubin 2 is designed to quickly shed wood fibers, so as fibers lift during sanding they break away from the disc surface instead of building up, which reduces clogging across the abrasive face. With less clogging, the cutting points of the aluminum oxide grain stay exposed, so the disc maintains its removal rate instead of glazing over. This design supports a 30 percent faster removal rate compared to an abrasive that does not shed fibers in the same way, which shortens time spent at each grit level. Rubin 2 is also designed to deliver 30 percent longer life out of every sheet, so each disc stays in service for more sanding before replacement. Because the system is designed for rapid grit progression from 80 to 220, moving through multiple grit steps can be done in a shorter overall sequence, which supports achieving the best possible finished surface in the least amount of time.
The Festool Rubin 2 5 inch sanding disc is designed for hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, and wood-based products, so it addresses typical woodworking materials.
Rubin 2 is designed to quickly shed wood fibers, so clogging is reduced and the abrasive stays sharp, which supports a 30 percent faster removal rate during sanding operations on wood.
The 150 grit Rubin 2 disc fits the system designed for rapid grit progression from 80 to 220, so it serves as a mid-to-fine step when refining surfaces toward final finishing.
The Festool Rubin 2 5 inch sanding disc uses a hook and loop backing, so it attaches by pressing onto a matching pad and removes by pulling away when changing discs.
The 9-hole pattern in the Rubin 2 disc provides openings for dust extraction through compatible pads, which helps keep the abrasive surface cleaner and maintains contact with the wood.
This Festool Rubin 2 5 inch sanding disc combines 150 grit aluminum oxide, a hook and loop backing, and a 9-hole layout designed for wood, so it fits into rapid grit progression from 80 to 220 on hardwoods, softwoods, tropical woods, and wood-based products. The Rubin 2 design sheds wood fibers to limit clogging, supports a 30 percent faster removal rate, and provides 30 percent longer life out of every sheet, which helps streamline sanding time and disc usage across repeated projects.
Sold In: 1 Box