
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Festool Rubin 2 5 inch 60 grit sanding disc is a paper backed aluminum oxide abrasive disc designed for woodworking with hook and loop attachment and 9-hole layout, so it pairs with compatible sanders that use this interface for controlled stock removal on wood. The 60 grit rating provides a coarse cut, so it tackles early sanding steps where leveling and shaping hardwoods, soft woods, tropical woods, or wood-based products is needed before moving to finer grits. The Rubin 2 design quickly sheds wood fibers, so the abrasive resists clogging and stays open, which matters when sanding resinous soft woods or dense hardwoods that typically load discs. This same shedding behavior keeps the abrasive cutting, which gives up to a 30% faster removal rate compared to conventional wood sanding discs and shortens time spent on initial passes. Rubin 2 also provides up to 30% longer life out of every sheet, reducing disc changes during larger runs.
This Festool Rubin 2 5 inch 60 grit hook and loop disc uses a hook and loop backing, so it mounts to sanders that use matching hook style pads without tools, which is useful when switching discs during a sanding sequence on wood. The 5 inch size combined with the 9-hole pattern matches backing pads designed around that hole arrangement, so dust extraction systems aligned to those holes can draw dust through the pad while work continues. The paper backed construction supports the hook and loop interface, so the disc stays flat against the pad while sanding hardwoods, soft woods, tropical woods, or wood-based products. With 60 grit aluminum oxide in a closed coated layout, this disc focuses its cut on the full surface area, so each pass removes material evenly as long as the sander pattern overlaps. The Rubin 2 design sheds wood fibers rather than loading, which keeps this mounting interface working efficiently over longer runs.
This Festool Rubin 2 5 inch 60 grit hook and loop disc is intended for sanding hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, and wood-based products, so it covers common cabinet, furniture, and millwork materials in a typical shop. The aluminum oxide abrasive on paper backing with synthetic resin bond in a closed coated structure is tuned to these wood substrates, so each grain is supported firmly enough to cut fibers cleanly rather than tearing. Because Rubin 2 is designed to quickly shed wood fibers, the surface stays open even on softer species where pitch and dust tend to clog other abrasives, which helps maintain the original 60 grit cut rate. On dense tropical woods, that same shedding behavior prevents the disc from glazing over, so you keep useful removal without frequent disc changes. The 5 inch diameter suits random orbit tools sized for this format, so operators can move efficiently across panel fields or frame parts.
The Rubin 2 design delivers up to a 30% faster removal rate and up to 30% longer life out of every sheet, so workers can cover more surface before changing discs and spend less time on early sanding stages. This increased removal rate at 60 grit means deep mill marks or uneven joints on wood-based products are brought down more quickly, so subsequent grits from 80 to 220, for which Rubin 2 is also designed, have less work to do. The rapid grit progression capability means each following grit step refines rather than repeats heavy stock removal, which improves workflow timing on both hardwood and soft wood assemblies. Because the abrasive is aluminum oxide in a closed coated pattern bonded with synthetic resin, the scratch pattern remains tight and predictable, which helps produce a consistent surface ready for the next grit. Together with the hook and loop interface and 9-hole pattern, these design elements let teams standardize their sanding approach across multiple wood species using the same Festool 499102 disc.
Festool Rubin 2 5 inch 60 grit sanding disc is designed for hardwoods, soft woods, tropical woods, and wood-based products, so it can be used across typical woodworking materials in one abrasive system.
Festool Rubin 2 shedding of wood fibers limits clogging, so the abrasive surface stays open and sharp, which supports a higher, more consistent removal rate on wood over longer sanding sessions.
The 9 hole pattern on the 5 inch disc aligns with matching backing pads, so dust can be pulled through those holes during sanding, helping keep the work surface and abrasive cleaner.
The 60 grit Rubin 2 disc provides coarse, aggressive cutting on wood, so it suits early sanding passes where leveling, shaping, or removing mill marks precedes moving to finer Rubin 2 grits.
The aluminum oxide on paper backing with synthetic resin closed coated construction gives dense grain coverage and firm bonding, so the disc cuts wood with a consistent scratch pattern.
Rubin 2 is designed for rapid grit progression, so once coarse sanding is done, moving through higher grits from 80 to 220 refines the surface efficiently toward a finished wood surface.
Festool Rubin 2 5 inch 60 grit sanding disc (manufacturer part 499102) combines a 5 inch 9-hole hook and loop format with aluminum oxide, synthetic resin, and closed coated construction, so it fits wood sanding workflows that prioritize fast removal and controlled scratch patterns. The Rubin 2 design sheds wood fibers, delivers up to 30% faster removal and up to 30% longer life out of every sheet, and supports rapid grit progression from 80 to 220, so crews can move from coarse shaping on hardwoods, soft woods, tropical woods, and wood-based products to final prep with fewer disc changes. For operations working across mixed wood materials with Festool-style hook and loop 5 inch 9-hole pads, this disc offers a focused option built around wood sanding performance.