Festool Rubin 2 5 inch sanding disc is a paper backed aluminum oxide abrasive disc designed specifically for wood and wood-based products, so each disc is focused on clean stock removal instead of general-purpose sanding. The 60 grit cut levels surfaces aggressively, which helps bring rough hardwoods or softwoods down to flat faster in early sanding steps. A hook and loop backing connects the disc to compatible 5 inch sanders securely yet allows quick disc changes between grit steps. The disc uses a 9-hole pattern, which supports dust extraction through matching pads so sanding debris leaves the cut instead of loading the surface. Rubin 2 is engineered to shed wood fibers quickly, so the abrasive surface resists clogging and keeps the cutting minerals exposed longer in normal woodworking use.
The 5 inch disc size matches sanders built for this diameter, so the hook and loop backing can seat flat across the pad face for even contact and predictable scratch patterns. The hook and loop attachment allows installers and shop crews to press the disc onto a compatible pad quickly, then pull it away without tools when changing to a fresh disc or a different grit. The 9-hole layout pairs with dust extraction pads designed for this pattern, so when aligned over matching holes, airflow can carry sanding dust away from the workpiece during operation. This combination of size, backing, and hole layout supports a sanding workflow where discs can be swapped rapidly while maintaining dust control and cut consistency from disc to disc.
This 5 inch, 60 grit Rubin 2 disc is intended for hardwoods like oak or maple, so it suits cabinet doors, face frames, and solid tops made from these species. The same abrasive is specified for soft woods like pine or fir, so it also fits millwork, trim, and carcass work built from these lighter materials. It is listed for tropical woods such as ebony or teak, so sanding dense or oily furniture components falls within its use range. Rubin 2 is also designated for wood-based products, so panels made from engineered boards sit within its working scope on casework and fixture builds. The aluminum oxide grain works across this variety of wood types, so one disc specification can serve multiple wood jobs inside a single shop.
Rubin 2 is formulated to quickly shed wood fibers, so loose fibers detach from the surface instead of binding into the grit, which keeps scratches clearer and helps maintain the intended 60 grit profile. With a 30% faster removal rate, early passes remove planer marks or unevenness more efficiently, so sanding routes through rough stock can move to finer grits sooner. The 30% longer life out of every sheet means each disc covers more work area, which reduces the number of discs consumed during a run of doors, panels, or trim sets. Rubin 2 is described as designed for rapid grit progression from 80 to 220, so once the surface is prepared with coarser grits, following steps can reach finish-ready surfaces with fewer intermediate passes. The closed coated aluminum oxide with synthetic resin provides a dense field of bonded grit, so the cut remains uniform across the disc face, which supports even surfaces that respond predictably to subsequent grit changes.
The Festool Rubin 2 5 inch sanding disc is intended for hardwoods, soft woods, tropical woods, and wood-based products, so one disc family can handle a wide range of wood shop sanding tasks.
The Rubin 2 design delivers a 30% faster removal rate, so it removes material more quickly than standard wood abrasives and shortens the time spent on rough and intermediate sanding steps.
Rubin 2 is engineered to quickly shed wood fibers and provide 30% longer life, so each disc stays sharp for more passes before needing replacement in continuous sanding work.
This Rubin 2 disc uses aluminum oxide in a closed coated structure with synthetic resin, so the abrasive face has dense grit coverage for consistent cutting across the disc surface.
Rubin 2 is designed for rapid grit progression from 80 to 220, so each grit step prepares the surface effectively for the next, helping reach finish-ready surfaces in less time.
This disc uses aluminum oxide bonded with synthetic resin, so the cutting minerals adhere firmly to the paper backing and provide a uniform scratch pattern across different wood types.
The Festool Rubin 2 5 inch 60 grit hook and loop disc is a wood-focused abrasive engineered for faster removal, longer disc life, and controlled grit progression on hardwoods, softwoods, tropical woods, and wood-based products. Its aluminum oxide, synthetic resin, closed coated construction supports uniform cutting across demanding cabinet, furniture, and millwork tasks. By matching this disc to 5 inch, 9-hole hook and loop sanding systems, wood shops and installers can align stock removal, dust extraction, and grit sequencing around a disc designed specifically for wood sanding workflows.
Sold In: 1 Box