Festool Rubin 2 5 inch 220 grit sanding disc is a wood-focused abrasive disc that uses aluminum oxide on a paper-backed sheet to finish wood surfaces to a fine P220 scratch pattern. The 5 inch diameter with a 9-hole layout works with compatible hook and loop sanding pads, so the disc mounts quickly and stays in place while you work. The Rubin 2 formulation is designed to quickly shed wood fibers, which clears the cutting surface and keeps the grit exposed during sanding. That shedding action reduces clogging in typical wood dust, so the abrasive stays sharp over more passes. With the abrasive remaining open and cutting, the disc delivers up to a 30% faster removal rate and up to 30% longer life out of every sheet, helping each disc cover more sanding before changeout on the bench or jobsite.
This Rubin 2 5 inch 220 grit hook and loop disc is designed for use on compatible hook and loop sanding pads, so it attaches by pressing the backing to the pad instead of relying on adhesive sheets. That attachment style supports rapid grit progression from 80 through 220, since each disc can be pulled off and replaced without scraping or waiting for adhesive to release. The 9-hole pattern in the disc aligns with matching pad holes on suitable machines, which routes dust through the pad during sanding and keeps the abrasive working in contact with wood fibers. Because the disc is designed for rapid grit progression on wood, it serves well as a finishing step after earlier Rubin 2 grits, moving the surface toward its best possible finished condition in the least amount of sanding time.
The Festool Rubin 2 5 inch 220 grit sanding disc is designed for use on hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, and on wood-based products such as composite panels. That wide wood-focused scope means a single abrasive line supports cabinet components, furniture parts, trim, and millwork built from different species and sheet goods. On hardwoods, the aluminum oxide grain and closed coated surface give a fine, even scratch pattern suited to bringing faces and edges to a finish-ready state. On softwoods such as pine or fir, the Rubin 2 design that sheds wood fibers keeps pitchy dust from loading the disc as quickly, so sanding stays more consistent across resinous areas. When working tropical woods like ebony or teak, the same shedding behavior and closed coated face help the abrasive stay active on dense fibers, which supports controlled stock removal without relying on excessive pressure.
The Rubin 2 formulation is designed to quickly shed wood fibers, and that behavior keeps the aluminum oxide grain open so each grit particle can continue to cut instead of sitting under compacted dust. With the abrasive staying open, the disc achieves up to a 30% faster removal rate, which shortens each sanding step and helps move through 80 to 220 faster on production runs. The same design supports up to 30% longer life out of every sheet, so each 5 inch 220 grit disc can stay on the sander for more panels or parts before performance drops. That interaction between cutting speed and life means fewer disc changes across a day, which stabilizes how surfaces come off the machine because the abrasive condition stays more predictable. Designed for rapid grit progression, this P220 disc works as the final step after coarser Rubin 2 grits, bringing the surface to its best possible finish in the least amount of sanding time on wood materials.
Festool Rubin 2 5 inch 220 grit sanding disc is designed for hardwoods like oak or maple, soft woods like pine or fir, tropical woods like ebony or teak, as well as on wood-based products in shop work.
The Rubin 2 design quickly sheds wood fibers, so dust does not compact as easily on the abrasive surface, which keeps the grit exposed and reduces clogging during extended sanding passes.
The 220 grit rating positions this disc for fine sanding after coarser steps, so it refines the surface and prepares wood or wood-based products for later finishing operations.
The hook and loop backing lets the disc attach to compatible pads by pressing it in place, which supports rapid grit changes during progression from 80 up to 220 on wood jobs.
The 9-hole pattern aligns with matching pad holes on suitable machines, which channels wood dust away from the surface to help the aluminum oxide grain continue cutting effectively.
The Rubin 2 disc offers up to a 30 percent faster removal rate and up to 30 percent longer life, so each sheet covers more sanding while reducing time spent changing abrasives.
The Festool Rubin 2 5 inch 220 grit sanding disc gives a paper-backed, aluminum oxide abrasive that is tuned specifically for wood and wood-based products. The Rubin 2 formulation that quickly sheds wood fibers helps preserve cutting speed, delivering up to 30% faster removal and up to 30% longer life out of every sheet. With a 9-hole layout for dust flow and hook and loop backing for quick changes in rapid grit progression, this P220 disc fits naturally as the fine-sanding step on hardwoods, softwoods, tropical woods, and panel goods in a woodworking shop or on site.
Sold In: 1 Box