Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Festool Rubin 2 5 inch sanding disc is an aluminum oxide abrasive disc designed for wood, so it targets typical cabinet, furniture, and millwork sanding tasks where consistent surface prep matters. The 40 grit cut provides aggressive stock removal, which speeds through rough leveling and early sanding stages before moving to finer grits. The hook and loop backing allows quick disc changes, so shifting from one grit to the next does not interrupt workflow across multiple pieces. The 9-hole pattern works with compatible sanders to move dust away from the surface, helping the abrasive stay effective while keeping the work area cleaner. Rubin 2 is designed to quickly shed wood fibers, which keeps the abrasive open so it stays sharp instead of loading. That same design leads to a 30% faster removal rate, so each disc moves more material in less time during busy shop schedules.
The 5 inch diameter matches typical compact sanders in this size class, so the face of the disc works across standard pad areas without overhang. The hook and loop backing attaches directly to a compatible hook and loop sanding pad, so loading and unloading discs is a simple press-on and peel-off action at the sander. The 9-hole configuration aligns with matching vacuum pads, so when paired correctly, dust extraction pulls through the disc surface rather than around it. The aluminum oxide on paper backed construction balances cut and flexibility, so the disc conforms to slight surface variations while still holding a defined scratch pattern. The closed coated design means the grit covers the surface densely, which produces an even, aggressive cut for wood stock removal in early sanding stages.
Rubin 2 is designed for use on hardwoods like oak or maple, so it handles common cabinet doors, frames, and tabletops built from these species. The same disc is specified for soft woods like pine or fir, so shops running trim, casework, or carcasses in these materials can use one abrasive line across jobs. Rubin 2 is also described for tropical woods like ebony or teak, so it addresses dense, resinous species often used in specialty pieces. The disc is intended for wood-based products, so sheet goods such as plywood or similar substrates fall within its scope as well. Aluminum oxide serves as the abrasive grain, which is suited to cutting wood fibers repeatedly during extended sanding sessions. The paper backed construction supports flexible handling on flat fields and slight contours, which is typical in door profiles and edge details.
Rubin 2 is designed for rapid grit progression from 80 to 220, so sanding sequences step smoothly from coarse shaping to final prep without unnecessary intermediate stages. This design focus allows crews to spend less time getting from 80 to 220, which tightens production schedules while still aiming at an optimal finished surface. The disc sheds wood fibers rather than holding them, so the scratch pattern stays more uniform across panels, which supports even stain and finish appearance. Its 30% faster removal rate means fewer passes are needed to reach target flatness, which helps when surfacing wide face frames or door rails. The 30% longer life out of every sheet means each disc stays in service for more work, which steadies abrasive consumption on repetitive runs. Aluminum oxide, synthetic resin, closed coated construction provides a dense, bonded grain layer, which delivers strong cutting contact on wood during every sanding stroke.
The Festool Rubin 2 5 inch sanding disc is designed for use on hardwoods, soft woods, tropical woods, and wood-based products, so it covers typical cabinet, furniture, and millwork materials.
The Rubin 2 40 grit hook and loop disc is designed to shed wood fibers, delivering a 30% faster removal rate, so coarse sanding stages move more quickly across workpieces.
The Rubin 2 aluminum oxide sanding disc provides 30% longer life out of every sheet, so each disc stays productive for more sanding, helping stabilize abrasive usage on projects.
The 5 inch 40 grit wood sanding disc matches common 5 inch sanders, so it covers the pad area efficiently for general cabinet, furniture, and trim sanding tasks.
The 9 hole 5 inch sanding disc is designed to align with compatible vacuum pads, so dust extraction can pull through the disc surface to keep the cut cleaner.
The closed coated synthetic resin abrasive disc uses densely packed aluminum oxide grains, so it creates an even, aggressive cut suited to wood stock removal.
The Festool 499093 sanding disc combines a 5 inch diameter, 40 grit cut, and hook and loop backing to support fast wood surface prep with straightforward disc changes. Rubin 2 design sheds fibers and resists clogging, so each disc cuts longer and faster on hardwoods, softwoods, tropical woods, and wood-based products. Aluminum oxide, synthetic resin, closed coated construction provides a dense cutting face tuned for wood removal work. Sold in full box quantities only, this setup serves shops and installers who run regular sanding cycles and want predictable abrasive performance across projects.
Sold In: 1 Box