Festool Rubin 2 5 inch sanding disc is a 5 inch, 180 grit hook and loop 9-hole aluminum oxide sanding disc designed for woodworking. The 180 grit cut refines surfaces between early shaping and final finishing, so cabinets, fronts, and trim sand out evenly. The hook and loop backing locks onto compatible pads during sanding, then releases quickly when changing grits, which keeps disc swaps fast in a production workflow. The 9-hole pattern aligns with matching pads to pull dust through the disc, helping abrasive grains stay exposed while you work. Aluminum oxide grains on a paper-backed disc provide a consistent scratch pattern on wood-based materials, supporting repeatable outcomes on batches of parts. The disc is built specifically for wood and wood-based products, giving installers and shop crews a focused abrasive for solid wood and panel work.
The hook and loop backing works with compatible hook and loop sanding pads, so discs press on and peel off without tools, keeping orbital or random-orbit sander changeovers quick. The 5 inch diameter matches 5 inch backing pads, maintaining full pad coverage and even contact across the surface for predictable scratch patterns. The 9-hole layout aligns to 9-hole dust-extraction pads, allowing dust to move through the disc into the sander or extraction system, which helps the abrasive stay clear during longer passes. The 180 grit grade fits mid- to late-stage sanding, so operators can level prior grits and move the surface toward finish-ready without jumping to very fine steps too early.
The disc is used on hardwoods like oak or maple, so face frames, doors, and trim in those species can be brought to a consistent sheen with one abrasive grade. It is also used on soft woods like pine or fir, letting the same 5 inch, 180 grit disc handle casework, millwork, or interior components in lighter, softer stock. Application on tropical woods like ebony or teak means dense, oily species can be sanded within the same product line, supporting shops that build higher-end pieces with mixed materials. Use on wood-based products extends the disc to plywood, MDF, and other engineered panels, which ties cabinet boxes, drawer parts, and fronts into the same sanding system. Because the disc is focused on wood and wood-based materials, the scratch pattern is tuned to these substrates, helping reduce visible swirl or uneven cutting on grainy or veneered surfaces.
Rubin 2 is designed to quickly shed wood fibers, so loose fibers generated during sanding do not load up the surface of the disc, which helps maintain consistent cutting across the full face of the pad. This shedding behavior eliminates clogging so the abrasive stays sharp, giving a steady removal rate from the first pass to the last on each disc. The result is a 30% faster removal rate, which shortens the time needed to level surfaces between 80 and 220 grits when processing multiple parts. The same engineering delivers 30% longer life out of every sheet, so each 5 inch, 180 grit disc can sand more linear feet before performance drops, aiding layout planning and estimating. Rubin 2 is designed for rapid grit progression from 80 to 220, tying intermediate grits like 180 into a predictable sequence, which helps crews move workpieces through each station with less rework. Aluminum oxide, synthetic resin, closed coated construction provides a stable bond and full-grain coverage on the paper backing, which supports a uniform scratch and reliable cutting when used with compatible hook and loop sanders.
The Festool Rubin 2 5 inch 180 grit disc is used on hardwoods, soft woods, tropical woods, and wood-based products, so one abrasive line can cover typical cabinet and woodworking materials.
Rubin 2 design sheds wood fibers and eliminates clogging so the abrasive stays sharp, which provides a 30% faster removal rate and reduces time spent at each sanding step.
The Rubin 2 design that keeps the abrasive sharp also delivers 30% longer life out of every sheet, supporting longer runs between disc changes on recurring work.
This Festool 499099 disc is a 5 inch, 180 grit hook and loop disc with a 9-hole pattern, matching compatible hook and loop pads with 9-hole dust extraction layouts.
The Rubin 2 disc uses aluminum oxide, synthetic resin, closed coated construction on a paper backing, providing full grain coverage for consistent cutting on wood and wood-based products.
Rubin 2 is designed for rapid grit progression from 80 to 220, so intermediate grits like 180 fit smoothly into a sequence that moves parts toward a finished surface efficiently.
This Festool Rubin 2 5 inch 180 grit hook and loop 9-hole aluminum oxide disc is focused on wood and wood-based products, making it suited to cabinet, millwork, and woodworking shops. Rubin 2 design eliminates clogging so the abrasive stays sharp, turning into a 30% faster removal rate and 30% longer life out of every sheet as surfaces move from 80 to 220 grits. Choose this disc when a mid-stage grit is needed to tie earlier cuts into a ready-to-finish surface on hardwoods, softwoods, tropical woods, and engineered panels.
Sold In: 1 Box