Omega National 36"W Alder Arched Series Wall Mount Range Hood, Sirius Compatible Liner Included - R2636SMS3QUF1

NOTE: As of 4/13/26, Omega National's prefix has changed from NP to RS. This part number has changed from NPR2636SMS3QUF1 to RSR2636SMS3QUF1.

Omega National 36 Inch Alder Arched Range Hood Use

Omega National 36 inch Alder Arched Range Hood is a wall mount wood range hood that provides a finished focal point over a cooking area, so the ventilation system can be wrapped in a coordinated wood design. The 36 inch width matches common cooktop and range sizes, so the hood can visually align with standard cooking layouts in a typical kitchen run. The hood is built in the Arched Series style, so the raised panel profile reads as a traditional wood hood that ties in with surrounding cabinet doors. As a wood range hood, it sits in the Kitchen & Bath Cabinet Accessories category, so it functions as part of the overall cabinet package rather than a standalone metal shell. The unit is branded by Omega National Products, so it fits into their broader Signature hood system used by many cabinet shops.

Key Wood Range Hood Details For Installers

• The 36 inch width allows planning around 30, 36, 42, and 48 inch series options, so installers can standardize cut sheets and layouts across multiple kitchen sizes while keeping the same Arched Series look.
• The hood uses Omega National standard Signature hood chimneys, so shops already using that chimney system can integrate this body into existing runs without changing their upper chase design or ordering patterns.
• A silver metallic liner that accommodates Sirius ventilation is part of the assembly, so the interior shell is ready to accept a Sirius ventilator, simplifying hood interior finishing and duct transition layout.
• The design is classified under wood range hoods, so it can be finished to match face frames and doors, supporting consistent stain or paint schedules across all cabinet components in the project.
• The manufacturer part number R2636SMS3QUF1 clearly identifies this 36 inch alder Arched Series wall mount configuration, helping shops order the same unit repeatedly for repeatable results on multi-lot or model-home work.

French Cleat Wall Mount Range Hood Installation

The hood installs using Omega National standard French cleat hanging system, so installers can mount a structural cleat to the wall first, then hang the wood hood body onto it for controlled alignment. This French cleat approach means the load is carried across a wider wall area, which supports stable positioning of the 36 inch hood while adjusting left-right placement before final fastening. The product is identified as a wall mount range hood, so it is intended to sit against a wall surface rather than in an island configuration, guiding how backing and blocking are planned in the stud bay. Because the hood uses the same hanging system as other Omega National Signature hoods, crews familiar with those products can repeat the same installation sequence, reducing layout time from job to job.

Using This Wood Range Hood In Kitchen Projects

Where This Omega National Hood Fits Best

This Omega National wood range hood is sized at 36 inches wide, so it fits naturally above a 36 inch cooking appliance within standard base and wall cabinet grids. As part of Omega National wood range hoods, it pairs with standard Signature hood chimneys, so the vertical chase above the hood can follow the same pattern as other Signature installations in the house. The alder construction referenced in the product name aligns with common cabinet species, so finishing systems already set up for alder door programs can be used on the hood to keep color and grain appearance consistent in the run. Because it is a wall mount configuration, it is suited to runs where upper cabinets flank the hood, allowing the arched raised panel profile to act as a visual centerpiece between those cabinets.

Details That Support Repeatable Hood Installations

The silver metallic liner that accommodates Sirius ventilation creates a defined interior cavity, so mechanical trades have a predictable space for positioning a Sirius ventilator and routing ductwork within the hood shell. This Sirius compatible hood liner also gives a durable interior surface, so the hood interior can be cleaned and serviced without exposing bare wood surfaces to cooking byproducts. Using Omega National standard Signature hood chimneys above this body simplifies repeated installations, because the same chimney dimensions and attachment methods can be used for 30, 36, 42, and 48 inch widths, reducing shop drawings for each size. The standard French cleat hanging system helps crews stage the hood body late in the project, because the cleat can be set while walls are open and the finished hood can be placed after millwork finishing is complete.

Common Questions About This Omega National Hood

Selecting This 36 Inch Hood For Your Layout

This Omega National wood range hood in the 36 inch Arched Series configuration gives cabinet shops a defined wall mount solution that aligns with Signature hood chimneys and Sirius ventilation. The French cleat hanging system and silver metallic liner support predictable installation steps, so project teams can repeat the same sequence from kitchen to kitchen. For runs built around a 36 inch cooking appliance and alder cabinet programs, this model R2636SMS3QUF1 offers a coordinated way to integrate the hood body into the overall cabinet design and workflow.