HandiTRIM slatwall trim is part of the HandiSOLUTIONS trim extrusions line designed to finish off a Handi br WALL installation so panels look complete and properly framed. This specific HandiSOLUTIONS HST6096M part is described as INSIDE/OUTSIDE CORNER MOLDING OAK 96, so it works at 90 degree corners where two slatwall runs meet, helping form a neat transition instead of a raw edge. The Inside/Outside Corner Trim is used when slatwall meets at 90 degree corners, which creates a defined edge that visually ties adjacent walls together. The oak 96 length gives continuous corner coverage along a standard wall run, reducing visible joints and helping keep the corner line straight from floor to top.
The Inside/Outside Corner Trim is intended where slatwall meets at 90 degree corners, so layout can follow normal wall geometry while the corner molding closes the angle. Using this HST6096M corner molding at the intersection means both adjoining slatwall edges are concealed by one continuous profile, which simplifies lining up the final panel grooves to the actual corner line. Because all moldings in this family are 96 or 120 long, the 96 length supports a single long pass along a typical vertical corner, reducing the number of joints that must be aligned when tying top and bottom of a Handi br WALL field together.
The Inside/Outside Corner Trim is used to trim slatwall meeting at 90 degree corners, so it fits situations where two Handi br WALL surfaces intersect, such as room corners or column wraps built from slatwall. In those locations, the trim covers the raw slatwall edges at the corner, allowing both panel runs to stop short of the true corner line while the molding defines the final finished edge. Because this trim is part of the broader HandiTRIM slatwall trim extrusions range for Handi br WALL installation, it is intended to be used alongside other profiles like T-Molding that cover seams of two adjoining pieces of slatwall, giving a consistent approach to edges and joints throughout the project. The oak 96 designation means the corner trim provides an oak-toned finish over a full 96 span, which keeps the appearance of the transition consistent from one end of the run to the other.
Inside/Outside Corner Trim used at 90 degree corners simplifies finishing because a single extrusion handles both inside and outside corner situations on Handi br WALL layouts, reducing the number of different profiles needed for typical room geometries. With all moldings in this series listed as 96 or 120 long, long straight segments can be run without frequent splices, which supports straighter visual lines along tall corners and reduces time spent aligning multiple short pieces. The identification INSIDE/OUTSIDE CORNER MOLDING OAK 96 ties the oak look directly to the corner, so the trim color and style remain coordinated with other HandiSOLUTIONS trim extrusions around the slatwall field. Since the broader Trim Extrusions offering is stated as a wide array of extrusions to finish off the Handi br WALL installation, using this specific HST6096M part at 90 degree intersections keeps the finishing approach consistent wherever panels meet or change direction.
The HandiSOLUTIONS HST6096M molding is Inside/Outside Corner Trim used to trim slatwall meeting at 90 degree corners, so it finishes the junction where two Handi br WALL runs intersect.
This corner molding is part of the trim extrusions offered to finish off a Handi br WALL installation, so it covers panel edges specifically where the slatwall turns a 90 degree corner.
The SAP description INSIDE/OUTSIDE CORNER MOLDING OAK 96 indicates an oak-style corner molding in a 96 length, giving a continuous finished edge over that span.
This Inside/Outside Corner Trim is part of the Trim Extrusions range offered to finish off the Handi br WALL installation, so it aligns with other HandiSOLUTIONS slatwall trim pieces in function and application.
The Inside/Outside Corner Trim is used precisely where slatwall meets at 90 degree corners, such as room corners or similar right-angle transitions in a Handi br WALL layout.
All moldings in this line are listed as 96 or 120 long, so long runs can be planned around these lengths to reduce joints along seams and corners.
The Inside/Outside Corner Molding Oak 96 HST6096M gives a defined way to handle 90 degree intersections in a Handi br WALL installation, using trim extrusions designed for this specific slatwall system. By using Inside/Outside Corner Trim where slatwall meets at 90 degree corners, panel edges are finished and the corner line is visually unified. Choosing this HandiTRIM slatwall trim part keeps corner treatment consistent with other HandiSOLUTIONS trim extrusions used to cover seams and edges across the rest of the project.
Sold In: 1 Each