Inside outside corner molding white 96 is HandiSOLUTIONS HandiTRIM slatwall trim designed as inside and outside corner moldings for a HandiWALL installation. This trim extrusion finishes off slatwall where panels meet at 90 degree corners, creating a clean junction that ties adjoining wall runs together. The molding is part of a wide array of trim extrusions offered specifically to complete Handi br WALL installations, so it matches the system layout and visual style. At 96 feet in stated length, each molding run helps span long vertical or horizontal corner lines without frequent joints, which supports a more uniform appearance along the corner. As slatwall parts and edges are brought together, this dedicated corner trim helps define the transition, giving the finished Handi br WALL installation a more intentional, finished look.
The inside/outside corner trim is specifically described as used to trim slatwall meeting at 90 degree corners, so it is sized and shaped for typical right-angle intersections within Handi br WALL layouts. As part of the HandiTRIM trim extrusions family for Handi br WALL installations, this molding is intended to work where HandiWALL panels run into each other at a corner, tying the edges together visually. The stated 96 foot length for this molding type supports longer continuous runs along a corner, which helps align with tall walls or extended corner spans in garage, closet, or shop layouts using Handi br WALL panels. Because the trim line also includes T-molding for covering seams of two adjoining pieces of slatwall, this corner profile fits into an overall trim system that addresses both flat seams and 90 degree transitions.
The Inside/Outside Corner Trim is described as used to trim slatwall meeting at 90 degree corners, so it is intended wherever two Handi br WALL slatwall runs intersect at a right angle. In a typical installation, this means vertical inside corners where two walls meet, vertical outside corners on room projections, or horizontal transitions that still form a 90 degree change in plane along the Handi br WALL layout. Because the molding is one of the trim extrusions offered to finish off the Handi br WALL installation, it is positioned as a finishing component rather than a load-bearing slat, so it visually frames the usable slatwall panels at the corner. The stated 96 foot length for all moldings of this model allows long corner sections in garages, closets, or storage walls using Handi br WALL to be finished with fewer pieces, which supports a more continuous line along the corner.
The SAP description identifies this product as inside/outside corner molding white 96 feet, and the web description notes that all moldings are 96 or 120 feet long, so this specific model delivers a 96 foot trim run for Handi br WALL corners. That long stated length means fewer joints must be created along tall or extended corners, which reduces visual breaks where two pieces of trim meet. Since the trim extrusions are explicitly positioned to finish off the Handi br WALL installation, using this dedicated corner molding allows the visible edge where slatwall meets a corner to match the rest of the HandiTRIM program in profile and color. The same description also mentions T-molding used to cover seams of two adjoining pieces of slatwall, and pairing that seam treatment with this corner profile helps create a consistent finished outline around the full slatwall field, from flat joints through to 90 degree changes in direction.
The inside/outside corner molding is used to trim slatwall meeting at 90 degree corners, so it covers and finishes the joint where Handi br WALL panels turn a corner.
The inside/outside corner trim is described for slatwall meeting at 90 degree corners, so it is applied at inside or outside corners where Handi br WALL slatwall runs intersect.
The SAP description states inside/outside corner molding white 96 feet, and the trim line notes all moldings are 96 or 120 feet long, so this model provides a 96 foot length.
The trim description notes T-molding used to cover seams of two adjoining pieces of slatwall and inside/outside corner trim used for 90 degree corners, so the two profiles handle flat seams and corners together.
The trim extrusions are described as offered to finish off the Handi br WALL installation, so this inside/outside corner molding is intended for use with Handi br WALL slatwall layouts.
The product is described as sold in both broken and full box quantities with discount available for full box orders, so ordering can align with small or larger Handi br WALL jobs.
This HandiSOLUTIONS HandiTRIM slatwall trim is defined as inside/outside corner molding white 96 feet, used to trim slatwall meeting at 90 degree corners. As a trim extrusion offered to finish off the Handi br WALL installation, it helps complete the edge treatment where panels turn a corner. The wider HandiTRIM description highlights both T-molding for seams of two adjoining pieces of slatwall and this inside/outside corner trim, giving a coordinated approach to finishing joints and corners on the same Handi br WALL project.
Sold In: 1 Each