HandiSOLUTIONS inside outside corner molding is designed to hide the seam in a 90 degree corner for HandiWALL slatwall panels, so corner transitions look finished and panels present as a continuous surface. This molding is made of extruded PVC, giving a consistent cross-section along its length that supports uniform engagement with the panel edges. The 80 foot length provides extended run capability from a single piece, which helps reduce joints along long corners in larger garage or storage walls. The white color matches HandiWALL slatwall panels, so the trim visually blends with the field material and keeps attention on mounted items. The product is made in the USA, which provides a defined source of manufacture for projects that prioritize domestic production.
This HandiWALL corner molding is designed to hide the seam in a 90 degree corner, so the profile is shaped to work where two slatwall panel runs meet at a right angle. Made of extruded PVC, the material maintains predictable dimensions along the 80 foot length, supporting a repeatable relationship to the panel edges during fitting and trimming. The inside outside configuration allows the same part to address either interior or exterior 90 degree corners on a HandiWALL layout, which simplifies planning around room geometry. The white finish aligns with white HandiWALL panels, so installers can run the molding from floor to ceiling or across partial-height sections without introducing a contrasting edge.
This HandiSOLUTIONS inside outside corner molding is used wherever HandiWALL slatwall panels intersect at a 90 degree corner, so it serves as the vertical finishing piece at room corners or column wraps. Because it is designed specifically to hide the seam in a 90 degree corner for HandiWALL slatwall panels, it works as the interface between two panel fields meeting at a right angle. The 80 foot length supports multiple wall sections within a single job, allowing long vertical or horizontal segments to be cut from one continuous extrusion. Its white color visually ties into white HandiWALL panels, so the corner joint reads as part of the system rather than a separate trim band along garage, closet, or utility spaces.
Being made of extruded PVC, this HandiWALL corner molding delivers a consistent profile that helps installers maintain a straight visual line along 90 degree corners, which keeps the slatwall layout square to adjacent walls and ceilings. The design intent to hide the seam in a 90 degree corner means the molding both conceals panel cut edges and defines the finished boundary of the system, supporting a uniform look across multiple bays or wall elevations. The inside outside capability in a single part simplifies layout decisions at each corner, since the same molding can be oriented to address either interior or exterior right-angle transitions. With an 80 foot length, longer stretches can be run with fewer splices, which reduces alignment checks at intermediate joints and supports a cleaner appearance on tall or continuous walls. The white color, matching HandiWALL panels, allows the trim to blend into the field so layout lines, seams, and cut edges are visually managed by the molding rather than remaining exposed on the panel faces.
The HandiSOLUTIONS HST1080M corner molding is designed to hide the seam in a 90 degree corner for HandiWALL slatwall panels, giving inside or outside corners a finished, continuous appearance.
This corner molding is designed for HandiWALL slatwall panels, so it fits the system at 90 degree corners and provides a trim piece where two panel runs meet.
The HST1080M corner molding is made of extruded PVC, providing a consistent cross-section along its length for uniform engagement with HandiWALL panel edges at the corner.
This HandiWALL corner molding has an 80 foot length, so installers can cut multiple corner pieces from a single extrusion for larger garage or storage wall projects.
The HandiSOLUTIONS HST1080M corner trim is white, allowing it to visually align with white HandiWALL slatwall panels and keep the corner detail low profile.
This HandiWALL corner molding is made in the USA, providing a defined domestic manufacturing source for projects that specify U.S.-made slatwall components.
The HandiSOLUTIONS inside outside corner molding, HST1080M, is designed to hide the seam in a 90 degree corner for HandiWALL slatwall panels, so it delivers a clean transition at room corners. Its extruded PVC construction and 80 foot length support consistent, repeatable results along inside and outside corners in garage, closet, or utility layouts. For projects built around HandiWALL slatwall panels, this white, made in the USA molding provides the dedicated corner trim that aligns the visual finish with the rest of the system.
Sold In: 1 Each