Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
HandiTRIM slatwall trim is a HandiSOLUTIONS inside/outside corner molding designed to finish HandiWALL installations in a beachwood look. This molding is part of the HandiSOLUTIONS trim extrusions line, so it is purpose-built to finish off the HandiWALL installation wherever a vertical or horizontal edge needs a clean termination. The profile is sized at 3/4 inch by 3/4 inch, which creates a defined, even edge that visually frames the slatwall surface and covers raw panel edges. At 96 inches long, each piece runs the full height or width of many wall sections, reducing the number of joints along an edge. The corner design forms a 90 degree angle connection that makes exposed outside and inside corners more cosmetically appealing on garage, closet, or storage walls finished with HandiWALL panels.
This HandiTRIM inside/outside corner molding is sized at 3/4 inch by 3/4 inch, so it nests over the meeting point of HandiWALL panel edges to create a defined corner line. Because the corner molding is used on vertical edges, it visually straightens and protects the edge of the slatwall field where panels terminate. When the same profile is used on top and bottom edges, it creates a simple border that ties the installation together, which can be important when HandiWALL panels transition to open wall, flooring, or ceiling lines. With a 96 inch length, the molding can be cut to match common wall dimensions while still allowing a full-height piece wherever the wall height is at or below that length.
This HandiTRIM inside/outside corner molding is part of the HandiSOLUTIONS trim extrusions designed specifically to finish HandiWALL installations. The 3/4 inch by 3/4 inch profile sits over the raw edge of HandiWALL panels at inside and outside corners, forming a right-angle trim that follows the wall line. Because the molding is used on vertical edges, it suits door returns, wall ends, and internal corners where two runs of HandiWALL meet at a 90 degree angle. The same profile may also be used on the top and bottom edges of the HandiWALL field, so one trim style can wrap the installation perimeter in a consistent beachwood tone. At 96 inches long, the molding spans typical residential and light commercial wall heights, which is useful when dressing garage, closet, or storage walls built from full-height HandiWALL sections.
The HandiTRIM corner molding is manufactured as part of the HandiSOLUTIONS trim extrusions family, so it is intended to work with the HandiWALL panels rather than as a generic edge piece. By framing out the wall, the molding hides cut panel edges and small gaps at terminations, which improves the finished look of seams and joints along the corners. The 3/4 inch by 3/4 inch dimension creates a predictable cover area, helping align panel placement so the trim lands evenly along both faces of the corner. Because the molding is used to make 90 degree angle connections more cosmetically appealing, it provides a simple way to turn an exposed corner into a defined architectural line that matches the HandiWALL surface. The 96 inch length reduces the number of separate trim segments on tall walls, which in turn reduces visual breaks and creates a more continuous appearance around the installation perimeter.
The HandiTRIM inside/outside corner molding is used to frame out HandiWALL installations, eliminating exposed seams and making 90 degree angle connections at corners more cosmetically appealing on slatwall projects.
The HST14096M slatwall molding is 96 inches long, allowing many wall sections to be trimmed with a single continuous piece for cleaner lines and fewer visible joints.
This HandiTRIM molding has a 3/4 inch by 3/4 inch profile, covering the corner evenly on both faces so HandiWALL panel edges and minor gaps are concealed at the junction.
This HandiTRIM corner molding is placed on vertical edges and may also be used on top and bottom edges of HandiWALL panels, creating a finished frame around the slatwall field.
The molding is designed to make 90 degree angle connections more cosmetically appealing by covering raw panel edges at inside and outside corners with a clean, consistent beachwood trim line.
The HST14096M designation identifies this specific HandiSOLUTIONS HandiTRIM inside/outside corner molding in beachwood at a 96 inch length for use with HandiWALL installations.
The HandiTRIM slatwall trim inside/outside corner molding in beachwood provides a 3/4 inch by 3/4 inch, 96 inch long profile tailored to HandiWALL installations. By framing out walls, eliminating seams, and improving 90 degree angle connections, it delivers the finished look many garage, closet, and storage wall projects require. Selecting this HandiSOLUTIONS HST14096M molding aligns trim details with the HandiWALL system, supporting consistent edges across vertical, top, and bottom terminations.
Sold In: 6 Each