Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Amerock Mulholland gunmetal pull is a zinc alloy cabinet handle designed for the Mulholland collection, so it gives casework a consistent visual line across doors and drawers. The 6-5/16 in (160 mm) center-to-center drilling lines up with common cabinet boring patterns, which helps installers reuse existing holes on many remodel jobs. The overall 7-1/8 in (181 mm) length gives hands a solid grab point across wider drawer fronts. A 1-7/16 in (37 mm) projection stands the pull off the face just enough to clear fingers from the door edge, reducing knuckle drag in daily use. The 7/8 in (22 mm) width and matching base dimensions distribute load across the mounting area, which supports a firm feel when the drawer is loaded. The gunmetal finish provides a dark, modern look that pairs with a range of cabinet colors in both shops and on site.
The Mulholland series 6-5/16 in (160 mm) center-to-center pull uses a fixed drilling pattern, so jig setups can be repeated across cabinet runs without remeasuring each door or drawer front. Its 7-1/8 in (181 mm) overall length provides clear reference points when centering the pull on face frames or full-overlay fronts. A 1-7/16 in (37 mm) projection sets the handle out from the cabinet face, which helps maintain consistent reveal lines in front of doors and drawer fronts. The 7/8 in (22 mm) base length and base width define the contact points at each end, guiding installers when aligning the pull straight to rail edges or stiles. With an 8-32 x 1 in screw size specified, the pull matches a standard machine thread used throughout cabinet hardware work.
This Amerock Mulholland cabinet handle is part of the Mulholland collection, so it suits projects that carry the same design language across kitchens, baths, or built-ins. The 6-5/16 in (160 mm) center-to-center drilling aligns well with many wider drawer fronts, helping maintain proportional hardware spacing on base cabinets and pantry drawers. Its 7-1/8 in (181 mm) overall length works on single pulls for medium to large doors, creating a straightforward reach point along the stile. The gunmetal finish anchors the pull visually against both light and dark cabinet finishes, which helps designers tie together mixed-material spaces. Because the pull sits 1-7/16 in (37 mm) off the surface, it leaves comfortable finger clearance on doors mounted near walls or appliances, supporting everyday operation in tight areas.
The Amerock Mulholland gunmetal pull uses a specified 6-5/16 in (160 mm) center-to-center dimension, which is critical when replacing existing hardware bored to that pattern on refacing jobs. The fixed 7-1/8 in (181 mm) overall length gives installers a reliable reference for aligning multiple pulls to rail centers, keeping sight lines straight across drawer banks. A defined 7/8 in (22 mm) width, mirrored in the base length and base width, creates predictable bearing points at each end, which helps keep the pull square to door edges during layout. The 1-7/16 in (37 mm) projection remains constant from piece to piece, so rows of Mulholland pulls present the same stand-off across an entire run. With the Amerock Corporation BP53530GM part number documented, shops can reorder the exact pull when adding cabinets later, preserving visual and dimensional consistency.
The Amerock Mulholland gunmetal pull has a 6-5/16 in (160 mm) center-to-center dimension, which sets the hole spacing used during cabinet door and drawer front drilling.
The BP53530GM cabinet pull measures 7-1/8 in (181 mm) overall, which provides a generous gripping length on wider drawers and standard cabinet doors.
This Mulholland collection cabinet pull projects 1-7/16 in (37 mm) from the cabinet face, creating finger clearance between the handle and the door or drawer front.
The pull is made from zinc alloy with a gunmetal finish, giving a solid metal feel and a dark, contemporary appearance on cabinet installations.
The specified screw size is 8-32 x 1 in, aligning with a common cabinet hardware thread and length dimension for typical door and drawer thicknesses.
Each base on the Mulholland pull measures 7/8 in (22 mm) in both length and width, defining the footprint that contacts the cabinet surface.
The Amerock Mulholland series 6-5/16 in (160 mm) center-to-center gunmetal pull combines a defined drilling pattern, zinc alloy construction, and detailed dimensions that support precise cabinet work. Its 7-1/8 in (181 mm) overall length, 1-7/16 in (37 mm) projection, and 7/8 in (22 mm) base sizing give installers reliable reference points across doors and drawers. For projects using the Mulholland collection look with a dark gunmetal finish, this BP53530GM pull provides a repeatable hardware choice that aligns with standard 8-32 x 1 in machine screw mounting.
Sold In: 1 Each
